Community discussions

MikroTik App

Search found 52 matches

by samuelongui
Mon Dec 15, 2014 9:03 pm
Forum: RouterBOARD hardware
Topic: trying bootp protocol
Replies: 2
Views: 2404

Re: trying bootp protocol

When boots (allways with an ether cable plugged on ether13) RB1100AHx2 seems to work OK. I make my own config, but when I make a rebbot (not system reset-configuration) or a shutdown, then RB1100AHx2 boots up but it's on default...
by samuelongui
Mon Dec 15, 2014 8:37 pm
Forum: RouterBOARD hardware
Topic: trying bootp protocol
Replies: 2
Views: 2404

Re: trying bootp protocol

On Putty: RouterBOOT backup booter 3.10 RouterBoard 1100AHx2 CPU frequency: 1066 MHz Memory size: 2048 MiB NAND size: 128 MiB Press any key within 2 seconds to enter setup.. Please, check ethernet cable... (and is there all time if I don't press ENTER or plug an ether cable on ether13) (when I press...
by samuelongui
Mon Dec 15, 2014 8:19 pm
Forum: RouterBOARD hardware
Topic: trying bootp protocol
Replies: 2
Views: 2404

trying bootp protocol

Hi all. Have an RB1100AHx2 Have installed RouterOS by Netinstall correctly (by putty changed boot to ethernet and then again boot from NAND). RB restatrs but never boots up, I can see this error: RouterBOOT backup booter 3.10 RouterBoard 1100AHx2 CPU frequency: 1066 MHz Memory size: 2048 MiB NAND si...
by samuelongui
Wed Jul 24, 2013 5:52 pm
Forum: General
Topic: PPoE clients can see all my net
Replies: 5
Views: 1532

Re: PPoE clients can see all my net

Any help please?
by samuelongui
Tue Jul 09, 2013 12:36 pm
Forum: General
Topic: PPoE clients can see all my net
Replies: 5
Views: 1532

Re: PPoE clients can see all my net

/ip address
add address=192.168.1.4/24 comment=WAN disabled=no interface=Wifi network=192.168.1.0
add address=192.168.3.1/24 comment=Hotspot disabled=no interface=PPPoE network=192.168.3.
by samuelongui
Tue Jul 09, 2013 10:57 am
Forum: General
Topic: PPoE clients can see all my net
Replies: 5
Views: 1532

Re: PPoE clients can see all my net

Thanks for your answer. I'm connected to RB751 by wireless, I can't do it by cable, it's upstairs. I have no filter rules, only the default ones hotspot adds. At firewall-NAT I have the default ones hotspot adds and these: /ip firewall nat add action=passthrough chain=unused-hs-chain comment="p...
by samuelongui
Mon Jul 08, 2013 6:51 pm
Forum: General
Topic: PPoE clients can see all my net
Replies: 5
Views: 1532

PPoE clients can see all my net

Hi all, I have set up a PPPoE server. Is running OK but a PPPoE can see my network, for example: my WAN is 192.168.1.1 and PPPoE pool is 192.168.2.1. CPE client is Ubiquiti router to 192.168.1.1. If in a client I browse http://192.168.2.1 he can acces to my RB. I'm on 192.168.1.1 network and if I br...
by samuelongui
Wed May 22, 2013 5:38 pm
Forum: Scripting
Topic: ChangeIP and Mikrotik 5.0
Replies: 22
Views: 11651

Re: ChangeIP and Mikrotik 5.0

This works for me: http://www.changeip.com/mikrotik/5.x.txt

But I have this message at log: fetch: file "ip.changeip.com.txt" created

How to disable it?
by samuelongui
Fri Jan 04, 2013 12:50 am
Forum: General
Topic: user-manager time limit ,help
Replies: 4
Views: 1648

Re: user-manager time limit ,help

Login as that client to see if it starts countdown

Enviado desde mi GT-I9300 usando Tapatalk 2
by samuelongui
Fri Dec 14, 2012 12:31 pm
Forum: The User Manager
Topic: Add required field
Replies: 0
Views: 1627

Add required field

Hi all,

I would like to add a required field on /user/signup/publicid for example:

DNI/Passport: 75144268E

Thanks
by samuelongui
Tue Dec 11, 2012 6:15 pm
Forum: The User Manager
Topic: setting up usermanager via winbox
Replies: 18
Views: 37478

Re: setting up usermanager via winbox

Are you connected to the hotspot's interface or where?
by samuelongui
Tue Dec 11, 2012 11:23 am
Forum: Scripting
Topic: dynDNS Update Script
Replies: 158
Views: 132137

Re: dynDNS Update Script

dyndns didn't work for me. Now I use changeip and it's working OK
by samuelongui
Tue Dec 11, 2012 8:56 am
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Yes, I got it working since the beginning.

Enviado desde mi GT-I9300 usando Tapatalk 2
by samuelongui
Mon Dec 10, 2012 10:23 am
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

thanks, so I understand this is normal, correct?

Have to test it correctly to confirm is working
by samuelongui
Sat Dec 08, 2012 2:12 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Have to refresh twice to get this url working: https://www.paypal.com/cgi-bin/webscr

why???
by samuelongui
Fri Dec 07, 2012 12:47 am
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Thanks for help, but dont understand the dynamic's host part
by samuelongui
Thu Dec 06, 2012 1:21 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Ok, now I can get signup page. I complete all info but when click Sign Up button it redirects to https://www.paypal.com/cgi-bin/webscr and browser tells me can't display page :? It's strange cause I can go this page with normal ADSL :? Importing cert i get these: certificates-imported: 1 private-key...
by samuelongui
Thu Dec 06, 2012 1:01 pm
Forum: General
Topic: Could Not Load Private Key
Replies: 1
Views: 4193

Re: Could Not Load Private Key

same for me:

certificates-imported: 1
private-keys-imported: 0
files-imported: 1
by samuelongui
Wed Dec 05, 2012 7:07 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Here is export: interface export # dec/05/2012 17:56:09 by RouterOS 5.22 # software id = M5DT-MEHP # /interface ethernet set 0 arp=enabled auto-negotiation=yes comment=WAN disabled=no full-duplex=yes l2mtu=1600 mac-address=D4:CA:6D:21:64:0E \ mtu=1500 name=ether1 speed=100Mbps set 1 arp=enabled auto...
by samuelongui
Wed Dec 05, 2012 3:19 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Still same error :?

If need any export, please tell me.
by samuelongui
Wed Dec 05, 2012 10:03 am
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Thanks for help. I have signup.html on files, that's not the error because I can access outside network by DDNS. Here is export from walled garden: add action=allow disabled=no dst-host=":^www\\.paypal\\.com\$" dst-port=443 server=hotspot1 add action=allow disabled=no dst-host=":^cont...
by samuelongui
Tue Dec 04, 2012 8:34 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

I'm having these errors when try to register a new hotspot user in LAN:

Firefox
Image

IExplorer
Image

Remotely I can connect with no problem with same url
by samuelongui
Tue Dec 04, 2012 4:05 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

Hi,

it's easy :-)
There are missing "umfiles" directory with signup files.
See here http://wiki.mikrotik.com/wiki/User_Mana ... ser_Signup
don't understand sorry
by samuelongui
Tue Oct 30, 2012 3:51 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

please help... :-?
by samuelongui
Tue Oct 30, 2012 9:38 am
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Re: Error 404: Not Found

I can access outside the network by: http://xxxxx.changeip.org/user/signup/elcortijo xxxxx: my host At hotspot login page I have set a url to http://xxxxx.changeip.org/user/signup/elcortijo When connected to hotspot as a new client, click on that url and still get: 404 bad error file not found Any i...
by samuelongui
Sun Oct 28, 2012 7:43 pm
Forum: The User Manager
Topic: Error 404: Not Found
Replies: 18
Views: 15105

Error 404: Not Found

I everybody, I'm trying to set a Hotspot on UM. Everything is set, but when I try to signup a new client, I'm getting that error. Here is my configuration: On hotspot log page a I have set a url to link to user's signup page: my_dyn_dns.changeip.org/user/signup/elcortijo Walled garden is enabled and...
by samuelongui
Fri Oct 19, 2012 10:52 pm
Forum: The User Manager
Topic: Can't acces to usermanager 5.21
Replies: 3
Views: 2908

Re: Can't acces to usermanager 5.21

solved by login: ip_router/userman instead of /usermanager

now on menu no paypal option as shown on wiki: http://wiki.mikrotik.com/wiki/User_Mana ... yPal_setup

:S
by samuelongui
Fri Oct 19, 2012 9:26 pm
Forum: The User Manager
Topic: Can't acces to usermanager 5.21
Replies: 3
Views: 2908

Re: Can't acces to usermanager 5.21

here is IE error, wich has been solved by clicking on compatibility view http://i47.tinypic.com/29or5th.jpg but still invalid username or password [admin@MikroTik] /tool user-manager customer> print Flags: X - disabled 0 login="samu" password="root" backup-allowed=yes time-zone=-...
by samuelongui
Fri Oct 19, 2012 8:48 am
Forum: The User Manager
Topic: Can't acces to usermanager 5.21
Replies: 3
Views: 2908

Can't acces to usermanager 5.21

Hi everybody, I have an RB751U-2HnD with 5.21 and usermanager package installed. I have set a subscriber like on wiki says: tool user-manager customer add login="admin" password="PASSWORD" permissions=owner When I make a print everything is correct: Flags: X - disabled 0 subscrib...
by samuelongui
Fri May 18, 2012 7:40 pm
Forum: Beginner Basics
Topic: Less speed when balancing
Replies: 0
Views: 702

Less speed when balancing

Hi all. I'll try to be much clear as I can. I have 2 WAN (30 Mb down speed / 3'5 Mb up speed each) from same ISP which are on pppoe-client and running. Then I have a local network with dhcp server (192.168.1.1/24). When I setup the load balance, my speed is very poor (3 Mb down speed / 1 Mb up speed...
by samuelongui
Thu Apr 19, 2012 12:05 pm
Forum: Beginner Basics
Topic: PCI not recogniced
Replies: 1
Views: 849

Re: PCI not recogniced

Unpluged and pluged again and now it's working, but I don't know why is duplicated on Winbox, with 4.17 is not duplicated.
by samuelongui
Wed Apr 18, 2012 11:30 am
Forum: Beginner Basics
Topic: PCI not recogniced
Replies: 1
Views: 849

PCI not recogniced

Hi all, I had RouterOS 3.20 installed to test it and finally bought a Level4 license. I installed it on a PC x86 with PCI on motherboard and 2 more PCI: D-LINK DFE-530TX and TP-LINK TL-TG3269. Both were working fine with 3.20 but now with Level4 the D-LINK is not recogniced but if I plug an ether ca...
by samuelongui
Fri Jun 17, 2011 11:06 pm
Forum: Beginner Basics
Topic: access to mikrotik via public IP using winbox
Replies: 2
Views: 2368

Re: access to mikrotik via public IP using winbox

Do you have TCP 8291 port open?
by samuelongui
Sun May 22, 2011 9:23 pm
Forum: General
Topic: PPPoE server with Ubiquiti stations
Replies: 4
Views: 3528

Re: PPPoE server with Ubiquiti stations

On station LocoM5 I have set on Network tab:

Router
PPPoE

user/password.

Do I have to enable NAT and DHCP? I would like my pc with RouterOS gives IP addresses to final clients.
by samuelongui
Thu May 19, 2011 11:57 pm
Forum: General
Topic: PPPoE server with Ubiquiti stations
Replies: 4
Views: 3528

Re: PPPoE server with Ubiquiti stations

Is this config correct for server?

Image
by samuelongui
Thu May 19, 2011 9:25 pm
Forum: General
Topic: PPPoE server with Ubiquiti stations
Replies: 4
Views: 3528

Re: PPPoE server with Ubiquiti stations

Thanks a lot, I'll try it as soon as possible, my LocoM5 has die :(
by samuelongui
Wed May 18, 2011 10:01 pm
Forum: General
Topic: PPPoE server with Ubiquiti stations
Replies: 4
Views: 3528

PPPoE server with Ubiquiti stations

Hello everybody, I have a pc with RouterOS. I want to give internet to same friends using PPPoE server. I'm using NanostationM5 as AP WDS and want to use LocoM5 as Station WDS to my frineds. I want to configure a PPPoE server on RouterOS and give to my friends an user/password. I don't know how to s...
by samuelongui
Thu May 05, 2011 12:28 am
Forum: General
Topic: Wrong password
Replies: 1
Views: 678

Wrong password

Hi all,

I have a pc with RouterOS installed. I changed the password and I think I wrote it too fast and worte it bad :? so I can't access by winbox.

is there any possibility to recover it without losing all config? In case of not, how can I reset RouterOS on a pc?

Thanks.
by samuelongui
Fri Apr 22, 2011 12:06 am
Forum: Beginner Basics
Topic: Can't see proxy cache
Replies: 0
Views: 629

Can't see proxy cache

I have set a proxy cache as you can see on pictures: http://img847.imageshack.us/img847/5193/30623886.jpg http://img845.imageshack.us/img845/9315/68977100.jpg Action: redirect to 8080 http://img217.imageshack.us/img217/1896/65655893.jpg http://img218.imageshack.us/img218/475/27748582.jpg http://img5...
by samuelongui
Thu Apr 21, 2011 7:48 pm
Forum: Beginner Basics
Topic: Mounting a server with RouterOS
Replies: 3
Views: 1487

Re: Mounting a server with RouterOS

It's fine, this weekend I hope will be working, thanks
by samuelongui
Thu Apr 14, 2011 9:04 pm
Forum: Beginner Basics
Topic: Mounting a server with RouterOS
Replies: 3
Views: 1487

Mounting a server with RouterOS

I'm looking to mount a server with RouterOS with those hardware: motherboard: ASROCK. G41M-GS3 775 G41 2DDR3 8GB GBLAN DVI MATX RAM: DDRIII 1GB PC 1333 KINGSTON KVR1333D3N9 1G PCI ethernet: the one that is integrated on the motherboard (Realtek RTL8111DL) and 2 units D-LINK DFE-530TX CPU: INTEL CELE...
by samuelongui
Thu Apr 14, 2011 7:33 pm
Forum: RouterBOARD hardware
Topic: PCI ethernet compatible with RouterOS
Replies: 4
Views: 1618

Re: PCI ethernet compatible with RouterOS

Thank you very much. I want to install RouterOS on a x86 pc.
by samuelongui
Thu Apr 14, 2011 12:45 pm
Forum: RouterBOARD hardware
Topic: PCI ethernet compatible with RouterOS
Replies: 4
Views: 1618

PCI ethernet compatible with RouterOS

Is there any updated list of PCI ethernet compatible with RouterOS?

Thanks in advanced
by samuelongui
Tue Apr 05, 2011 10:56 pm
Forum: RouterBOARD hardware
Topic: Invalid microSD on RB450G
Replies: 9
Views: 5140

Re: Invalid microSD on RB450G

Just mark the card and hit format in winbox
when I do that, router disconnects from PC. I have used 4.17 and 5.0 but microSD is invalid.
by samuelongui
Wed Mar 30, 2011 3:40 pm
Forum: RouterBOARD hardware
Topic: Invalid microSD on RB450G
Replies: 9
Views: 5140

Re: Invalid microSD on RB450G

None?
by samuelongui
Tue Mar 29, 2011 10:32 pm
Forum: RouterBOARD hardware
Topic: Invalid microSD on RB450G
Replies: 9
Views: 5140

Invalid microSD on RB450G

I have bought this one: 8GB ADATA micro SDHC (AUSDH8GCL6) (Class 6) as I saw is compatible with RB450G http://wiki.mikrotik.com/wiki/Supported_Hardware#Memory_cards But whe I go to system>stores I se microSD as invalid. Everytime I try to format it, router disconects :? Is there any trick to make it...
by samuelongui
Sat Mar 19, 2011 6:52 pm
Forum: The Dude
Topic: Dude as Syslog Server
Replies: 1
Views: 1884

Dude as Syslog Server

Everything goes perfect if I use WinSyslog, but with The Dude can't see log from my RB450G. I have seen some information from here http://wiki.mikrotik.com/wiki/The_Dude/Syslog and here http://wiki.mikrotik.com/wiki/Manual:The_Dude/Server_settings but still doesn't work On syslog I added 192.168.10....
by samuelongui
Thu Mar 17, 2011 9:46 pm
Forum: General
Topic: How to save web-proxy logs (its urgent)
Replies: 5
Views: 3844

Re: How to save web-proxy logs (its urgent)

This is what I was looking for. I have my PC connected to ether2 who is a DHCP Server to surf internet. I want to create a Log to see who is and where is surfing internet on my Hotspot on ether3 on my RB450G, here is the example: ADSL --> ether1 ether2 --> my PC with internet ether3 --> hotspot for ...
by samuelongui
Thu Mar 17, 2011 12:09 am
Forum: RouterBOARD hardware
Topic: How to reset RB450G?
Replies: 11
Views: 31787

Re: How to reset RB450G?

so, I have to close the hole, plug the jack DC and it will reset, correct?
by samuelongui
Thu Mar 17, 2011 12:02 am
Forum: RouterBOARD hardware
Topic: How to reset RB450G?
Replies: 11
Views: 31787

Re: How to reset RB450G?

Too difficult, I don't understand anything :?
by samuelongui
Wed Mar 16, 2011 11:52 pm
Forum: RouterBOARD hardware
Topic: How to reset RB450G?
Replies: 11
Views: 31787

How to reset RB450G?

I have try this:

unplug DC adapter.
press reset.
connect DC adapter wihout stop pressing reset

it works on RB750G, but not on RB450G. which is the correct sequence? Without Winbox of course.

Thanks
by samuelongui
Wed Mar 02, 2011 9:11 pm
Forum: Beginner Basics
Topic: RouerOS 4.17 for 400series
Replies: 1
Views: 1665

RouerOS 4.17 for 400series

I have bought a RB450G (I'll get it in 2 days I hope) and trying to download RouterOS 4.17 but ir doesn't work in any on the links posted at download section: http://www.mikrotik.com/download.html I have try RouterOS 4.17 * All files (requires a Torrent client) * Combined package (http) * All packag...