Hi I have a network consisting of multiple subnets. I would like to communicate from the one subnet to the other (and in particular, from a node in subnet 1 to a node in subnet 2). I have tried using VLAN's, but with little success. Here's the problem: Subnet 1 = 192.168.1.0/24. Subnet 2 = 192.168.2...

Any help would be much appreciated. Even if it is just pointing me into the correct direction.

Thanks.

Hi I have a relatively simple and small (one router) network setup. Please see the following (rudimentary) network layout: Doc1.jpg [Jeandre@MikroTik] > interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU MAX-L2MTU 0 R Ethernet1-UCom ether 1500 1600 1 R Eth...

Hi Thanks for the reply. Maybe I should clarify my setup. Please see the following (rudimentary) network layout: Doc1.jpg [Jeandre@MikroTik] > interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU MAX-L2MTU 0 R Ethernet1-UCom ether 1500 1600 1 R Ethernet2-Net...

Hi I've implemented some basic mangle rules to differentiate traffic flow between two users. (Pierre and Jeandre in the code below). The idea here is that each users traffic flow their respective adsl account. The two adsl accounts dialed from within the MT router I am using. The problem comes with ...

Hi guys I need to implement some form of dynamic throttel between two users of an adsl line. The line syncs at around 4mbps and so to be fair the users should be expecting half that at any given point. However, it seems a huge waste of available bw to hard-limit the users to 2mbps each, as they may ...

Hi I seem to have a bit of a problem. I would like to import a large list of IP ranges into an address list, but the list of ip ranges are stored in a text file and are separated by a return character (enter). I have attached the list for reference. Is it possible to script something that can move t...

Hi guys

If anyone can please help me with this, that would be great. I still have not managed to sort out this problem.

Any help would be appreciated.

Thanx

Hi Im currently running ros5.7 on both my rb411uahr and rb711g which are connected via a switch to my local network. I have an wireless interface on my rb711g that connects to a wug (wireless user group). This wug operates on the 172.18.0.0/16 subnet with static ip allocations. I have been allocated...

That would definitely be a very useful tool.

Yip. That would be great! Some form of a tool to guide you in the right direction when debugging. I sat once for 3 hours staring at a uncompilable script just to find a simple math error.

Has there been attempts at producing such a tool?

Hi If I implement a filter rule as follows: [Jeandre@MikroTik] > ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting action=passthrough src-address-list=Media-Center dst-address-list=Local 1 chain=prerouting action=passthrough src-address-list=Local dst-address-...

Has anyone yet made an attempt at writing a basic syntax compiler for MT Scripts?

Or is MT Scripts based on a scripting language that has a compiler. Even if it wont compile completely, but just check the syntax symbols?

Hi fewi. Thanks for the reply. Ill look into that. Sounds like a valid idea. In the meanwhile, I have a question about the firewall and packet counting. If I implement a filter rule as follows: [Jeandre@MikroTik] > ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerou...

Hi fewi Thanks for the reply. I guess my idea wont work then. Here's what i want the the hotspot/network to do: -- account for traffic from users to the internet -- users are to autheticate at the hotspot via the users mac-address (ie: no login page and detials) -- no need for the user manager - i h...

Is there no way I can 'fool' the hotspot so to not account for local traffic. I've tried several rules in the firewall. Is there a rule that could be added in the firewall that would bypass all hotspot rules. I've tried: ip firewall filter add chain="forward" dst-address="192.168.0.0/...

Hi I'm currently running a hotspot on a bridge (EtherNet_WiFi_EoIP_Bridge in the code below) I created between my Ethernet and Wifi interfaces. On that bridge I'm running a hotspot. There is however a second interface on my MT that I use to connect to a wug (CTWUG_Link interface in the code below)(W...

Hi fewi Thanks for the responce. :) I managed to find the issue. It turned out to be the 'translating' of the ip's to new ip addresses as you mentioned. That caused everything to stop working. After a long and tedious look at everything I discovered that the user profile I used (and specified at all...

Hi I have a hotspot active on a bridged interface (Ethernet + WiFi + Eoip (via PPTP)). The Eoip port is currently disabled. Thus only the Ethernet and Wifi ports are active. The setup is as follows: [Jeandre@MikroTik] > interface bridge print Flags: X - disabled, R - running 0 R ;;; Bridge Interface...

Hi fewi Thanks for the quick reply. I managed to get the bridge eoip vpn to work eventually. As I thought, it turned out my mtu settings were wrong. After playing around for some time, I managed to get the correct settings. They are now running at: Internet interfaces (UCom & Vodacom_3G): mtu=15...

Hi I've recently setup a vpn between my to homes via the internet. The vpn uses a PPTP tunnel to connect both networks via the internet. Within that tunnel I use an EoIP tunnel to transparently bridge the two networks. I used the following guides to establish this connection: http://wiki.mikrotik.co...

Hi temuri426 Sorry for the late reply. I eventually sent the mini-pci-e card back to sierra for a firmware upgrade. That seemed to make things on my board more stable. You were right. It turns out that i had basic routing issues. In fact, network issues. Me trying so hastily to get the link up and r...

Hi temuri426.. Did you come right with the firmware upgrade on UN2400 card? I purchased a Sierra Wireless MC8792v recently and tried using that to connect to Vodacom 3G but to my despair the card does not want to route any of my traffic through the internet. It does however attach itself to the voda...