Community discussions

MikroTik App

Search found 58 matches

by magnitude
Fri May 05, 2017 5:30 pm
Forum: RouterBOARD hardware
Topic: Hardware suggestion for 4000 pppoe session
Replies: 1
Views: 895

Re: Hardware suggestion for 4000 pppoe session

Hi any one from mikrotik ?
by magnitude
Thu May 04, 2017 3:05 pm
Forum: RouterBOARD hardware
Topic: Hardware suggestion for 4000 pppoe session
Replies: 1
Views: 895

Hardware suggestion for 4000 pppoe session

Hello,
Which Xeon Cpu is capable of 4000 concurrent pppoe session with approx load of 2 Gig on a X86.

Kindly suggest me
by magnitude
Fri Apr 21, 2017 8:26 pm
Forum: General
Topic: DDoS story, or WARNING: use 'conection-limit' with caution!
Replies: 168
Views: 111657

Re: DDoS story, or WARNING: use 'conection-limit' with cauti

protocol is tcp source ip :115.238.184.5, source port 50006 when that happen i have traffic allmost on all public ip in subnet /23 around 360kbps per ip and upload on my network is 90-150Mbps. How did u solve this problem,,,i am also facing similar problem,,,my all public ip in subnet is affected b...
by magnitude
Tue Apr 11, 2017 5:46 pm
Forum: General
Topic: Cluster server for pppoe
Replies: 7
Views: 2170

Re: Cluster server for pppoe

This is a user-supported forum, Mikrotik staff do participate but what you're asking for isn't related with support per se... Do deploy another PPPoE server and bring the connections to it, dividing the load; without knowing specific details of your network topology and actual implementation/config...
by magnitude
Mon Apr 10, 2017 12:09 pm
Forum: General
Topic: Cluster server for pppoe
Replies: 7
Views: 2170

Re: Cluster server for pppoe

hello mikrotik ?
by magnitude
Sun Apr 09, 2017 1:16 pm
Forum: General
Topic: Cluster server for pppoe
Replies: 7
Views: 2170

Re: Cluster server for pppoe

Is the CCR1036 being used for more duties? (i.e. firewall, QoS?) From experience, a dedicated PPPoE CCR1036 with double that users figure doing simple queues would hover around 7-12% CPU maximum. Load balancing PPPoE servers isn't a simple task, I'd first try to straighten out why such high load on...
by magnitude
Sun Apr 09, 2017 12:25 pm
Forum: General
Topic: Cluster server for pppoe
Replies: 7
Views: 2170

Cluster server for pppoe

Hi, i am small isp, currently i am serving 1200 pppoe session with average load of 700 Mbps on CCR 1036, but the cpu goes above 50%, so i want to add one more ccr 1036 into the network for cluster. Kindly suggest how to add 2 PPPOE Mikrotik CCR 1036 in a network for load balancing.


Thanks
by magnitude
Mon Mar 27, 2017 7:35 am
Forum: General
Topic: vlan queue
Replies: 1
Views: 783

Re: vlan queue

anyone who can help me ?
by magnitude
Sun Mar 26, 2017 10:30 am
Forum: General
Topic: vlan queue
Replies: 1
Views: 783

vlan queue

Hi,

I want to make queue on vlan interface in mikrotik ccr 1036, i ve tried using simple queue by selecting target address = vlan1503 but queue not working.

Please guide me how to do that

Thanks
by magnitude
Thu Jan 08, 2015 7:31 am
Forum: Wireless Networking
Topic: SXT 5ND LITE DOES NOT BOOT
Replies: 11
Views: 4072

Re: SXT 5ND LITE DOES NOT BOOT

supout file has been sent..waiting for their reply.
by magnitude
Wed Jan 07, 2015 8:44 pm
Forum: Wireless Networking
Topic: SXT 5ND LITE DOES NOT BOOT
Replies: 11
Views: 4072

Re: SXT 5ND LITE DOES NOT BOOT

No success from Latest OS Update...3 units are dead...will again try to boot one unit by heating and will send the support file to support..
by magnitude
Mon Jan 05, 2015 1:29 pm
Forum: Wireless Networking
Topic: SXT 5ND LITE DOES NOT BOOT
Replies: 11
Views: 4072

Re: SXT 5ND LITE DOES NOT BOOT

okay wil try it...last night i was heating the sxt pcb with heatgun for almost 5 minutes and then i leave it for 10 minute to cool off...after then i thought lets make a try ...and it booted and loaded the os everything was working for 1 hour and after power failure ..same thing happening,, no boot,...
by magnitude
Sun Jan 04, 2015 4:16 pm
Forum: Wireless Networking
Topic: SXT 5ND LITE DOES NOT BOOT
Replies: 11
Views: 4072

Re: SXT 5ND LITE DOES NOT BOOT

Ros version 6.1, Day temperature = 20 degree, night temp = 6 degree, power supply = original mikrotik, cat5 shielded,

Last night one more sxt stopped working no lan no beep just power led.
by magnitude
Fri Jan 02, 2015 10:25 pm
Forum: Wireless Networking
Topic: SXT 5ND LITE DOES NOT BOOT
Replies: 11
Views: 4072

SXT 5ND LITE DOES NOT BOOT

I HAVE INSTALLED 200 NOS OF SXT TILL NOW...NOW ITS BEEN ONE YEAR..NOW 5 SXT ARE STOPPED WORKING...NO BEEP , NO USER LED BLINK, NO LAN, NOTHING I TRIED TO RESET BUT NOTHING HAPPENS. I AM ALLREADY INVESTED HUGE MONEY ON MIKROTIK SXT NOW I M UPSET WHAT IS GOING ON WITH SXT...NONE OF THEM HAVE WATER ING...
by magnitude
Thu Aug 04, 2011 9:07 pm
Forum: Wireless Networking
Topic: Inteference problem
Replies: 1
Views: 1012

Inteference problem

I am thinking on Two projects due to interference. There are many Ap's around us three of them are just 500 metr away from us. Noise floor is - 50....one with least - 77. It will cause interference problem. First Project AP - Mikrotik 433AH+XR2(Super channel) CLIENT CPE - NanoStation Loco 2 Frequenc...
by magnitude
Thu Aug 04, 2011 1:36 pm
Forum: Wireless Networking
Topic: SuperChannel
Replies: 12
Views: 15737

Re: SuperChannel

I think all of them.
Thanks a lot normis.
by magnitude
Thu Aug 04, 2011 1:28 pm
Forum: Wireless Networking
Topic: SuperChannel
Replies: 12
Views: 15737

Re: SuperChannel

There is no more need to upgrade your license for Superchannel mode support. Since RouterOS v4.3 Superchannel frequency mode is available to all users. Simply upgrade to the latest version, and set wireless mode to superchannel, to be able to test frequencies that are outside your regulatory domain...
by magnitude
Thu Aug 04, 2011 1:16 pm
Forum: Wireless Networking
Topic: SuperChannel
Replies: 12
Views: 15737

SuperChannel

I have Routerboard 433AH Licence5...and i want to use superchannel feature..do i have to pay extra to use 2.3 ghz Frequency ?
by magnitude
Thu Jul 28, 2011 6:02 pm
Forum: General
Topic: Horizontol or Vertical Polarisation
Replies: 11
Views: 3355

Re: Horizontol or Vertical Polarisation

Thanks...but some of my clients doesnt have clear fresnel zone.....\there are many tree in the middle. Looks like from what you have said you have two issues first Interference - from channel congestion and possible AP performance using 802.11 protocol (and not NV2 as you are using UBNT CPE's), the...
by magnitude
Thu Jul 28, 2011 5:41 pm
Forum: General
Topic: Horizontol or Vertical Polarisation
Replies: 11
Views: 3355

Re: Horizontol or Vertical Polarisation

When you run a scan on vertical, you get more radios with good signal compared to horizontal, but if the reverse is the case, that means it moght not get better. From experience, many people dont like using horinzontal bcos it does not go far which is one of the reasons it always have lesser interf...
by magnitude
Thu Jul 28, 2011 5:33 pm
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 30451

Re: Sector Antennas Best Practices

The antenna needs to be rotated 90*. Antenna polarization refers to the plane of the electrical component of the EM wave , which is a function of the antenna design Thanks a lot.. Is there anyway to check the polarisation of Other AP's running in our area....suppose they are on verticle...so its be...
by magnitude
Thu Jul 28, 2011 5:09 pm
Forum: General
Topic: Horizontol or Vertical Polarisation
Replies: 11
Views: 3355

Re: Horizontol or Vertical Polarisation

Another consideration is Fresnel zone going from vertical to horizontal will all of your clients have clear hoz fresnel zone. I would suggest a read of the this topic http://forum.mikrotik.com/viewtopic.php?f=7&t=23161 Thanks...but some of my clients doesnt have clear fresnel zone.....\there ar...
by magnitude
Thu Jul 28, 2011 5:07 pm
Forum: General
Topic: Horizontol or Vertical Polarisation
Replies: 11
Views: 3355

Re: Horizontol or Vertical Polarisation

Using horizontal polirization will improve the snr (gain) but will cover lesser distance. Changing the polirization in the AirOS is all you need to do in the CPE! You dont need any configuration change on the mikrotik! Thanks a lot.. Is there anyway to check the polarisation of Other AP's running i...
by magnitude
Thu Jul 28, 2011 2:56 pm
Forum: General
Topic: Horizontol or Vertical Polarisation
Replies: 11
Views: 3355

Re: Horizontol or Vertical Polarisation

if you have different polarisation you have very little interference from other link then. If you have 2 antenna that are polarised you can establish link with correct antenna position and then just turn one of the antenna 90 degrees in either direction and see how signal strength drops. We are usi...
by magnitude
Thu Jul 28, 2011 1:52 pm
Forum: Wireless Networking
Topic: Sector Antennas Best Practices
Replies: 96
Views: 30451

Re: Sector Antennas Best Practices

You can use the same antennas on the client side. They will just have to be rotated 90 degrees.
I dont understand what does it mean " They will just have to be rotated 90 degrees ". Do i need to rotate the client CPE to work with horizontal Polarisation ?
by magnitude
Thu Jul 28, 2011 10:00 am
Forum: General
Topic: Horizontol or Vertical Polarisation
Replies: 11
Views: 3355

Horizontol or Vertical Polarisation

We are facing interference issue with several AP's running in our area....rite now we are using 3 sector anteena 120 degree Vertical 17dbi and 3 XR2 Cards (Freq = 2.4GHz)...i talked to the distributer of Mikrotik he suggested me to install Horizontal anteena instead of Vertical to solve the interfer...
by magnitude
Thu Jul 28, 2011 9:56 am
Forum: General
Topic: PSU For RB433AH
Replies: 6
Views: 1191

Re: PSU For RB433AH

24V will be fine.
Thanks.
by magnitude
Thu Jul 28, 2011 9:51 am
Forum: General
Topic: PSU For RB433AH
Replies: 6
Views: 1191

Re: PSU For RB433AH

100 feet distance is ok. Power supply selection depends on extensions cards used in the board. If you planned to get maximum from board (3 High power cards), I would recommend power supply with 10-25% reserve (+maximum board supports). Otherwise standard power supply will do the job without any pro...
by magnitude
Thu Jul 28, 2011 8:18 am
Forum: General
Topic: RIP ROUTING PROBLEM
Replies: 3
Views: 1066

Re: RIP ROUTING PROBLEM

Router A: [admin@MikroTik] > /ip address print detail Flags: X - disabled, I - invalid, D - dynamic 0 address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN actual-interface=WAN 1 address=10.10.1.1/24 network=10.10.1.0 broadcast=10.10.1.255 interface=LAN actual-interface=LA...
by magnitude
Thu Jul 28, 2011 5:59 am
Forum: General
Topic: RIP ROUTING PROBLEM
Replies: 3
Views: 1066

Re: RIP ROUTING PROBLEM

Still no reply...
by magnitude
Thu Jul 28, 2011 5:57 am
Forum: General
Topic: PSU For RB433AH
Replies: 6
Views: 1191

Re: PSU For RB433AH

RouterBOARD 433AH max power consumption is ~25W.
Standard 1A/24V power supply is enough.
Thanks...

What is the better way to feed this routerboard Via POE or Directly connected adapter ?
My routerboard is 100 feet away so if i want to feed via POE is Standard 1A/24V power supply is enough?
by magnitude
Wed Jul 27, 2011 8:31 am
Forum: General
Topic: RIP ROUTING PROBLEM
Replies: 3
Views: 1066

RIP ROUTING PROBLEM

Hi, I have what I believe is a fairly simple setup. I am planning to replace other routers (non-Microtik) one at a time and I am configuring these to match their settings nearly identically. The routers are running RIPv1 w/o authentication. I currently have two RB1100's (tried with shipped 4.16, 4.1...
by magnitude
Tue Jul 26, 2011 7:31 pm
Forum: General
Topic: PSU For RB433AH
Replies: 6
Views: 1191

PSU For RB433AH

Hey guys i m going to install RB433AH With 2xXR2 MiniPci....how much power supply do we need to feed them..
Please suggest me...With Volts and Amp.

Thanks
by magnitude
Tue Jul 26, 2011 2:04 pm
Forum: General
Topic: User Manager Help
Replies: 2
Views: 761

Re: User Manager Help

Can you run User Manager and Hotspot on the same system pc or router board?
Yes.
Cause I'm trying but I can't get thru to the "http://myip/userman" page.
Error 404 - not found
Use http://mypublicip/userman
Thanks now i m able to get User manager Login page
by magnitude
Tue Jul 26, 2011 2:00 pm
Forum: Beginner Basics
Topic: Troubles with RIP - No routes updating
Replies: 1
Views: 2058

Re: Troubles with RIP - No routes updating

I am aslo facing same problem.....any suggestion or solution from MT Guys ?
by magnitude
Mon Jul 25, 2011 10:10 pm
Forum: Wireless Networking
Topic: BRIDGE TO ROUTING MIGRATION NEED HELP
Replies: 4
Views: 1351

Re: BRIDGE TO ROUTING MIGRATION NEED HELP

How are all the devices connected with each other? Please give us network diagram.
Here is our network diagrame...it is bridge setup and i want to migrate to routing.
Image
PC2 Wan Ip should be diffrent ...May be it was mistaken in the diagram
by magnitude
Mon Jul 25, 2011 7:06 pm
Forum: General
Topic: User Manager Help
Replies: 2
Views: 761

User Manager Help

Hey guys... Can you run User Manager and Hotspot on the same system pc or router board? Cause I'm trying but I can't get thru to the "http://myip/userman" page. Error 404 - not found Hotspot is enabled and running smoothly. User-Manager is under my package list and it is enabled, the first...
by magnitude
Mon Jul 25, 2011 5:10 pm
Forum: Beginner Basics
Topic: HOTSPOT
Replies: 4
Views: 1375

Re: HOTSPOT

If you're not logged in you can't ping anything, including the router itself on the interface you're behind. That's simply how Hotspots are implemented. You can permit unauthorized clients to ping the router by adding a walled garden IP rule: /ip hotspot walled-garden ip add protocol=icmp dst-addre...
by magnitude
Mon Jul 25, 2011 4:59 pm
Forum: Beginner Basics
Topic: HOTSPOT
Replies: 4
Views: 1375

Re: HOTSPOT

Because they are on the 192.x.x.x subnet, they need to use a router to talk to a different subnet than they are on. Part of the basic hotspot setup is a firewall to prevent unauthorized users from doing this. This isn't really a "security" thing in your setup however, since both subnets a...
by magnitude
Mon Jul 25, 2011 3:43 pm
Forum: Wireless Networking
Topic: BRIDGE TO ROUTING MIGRATION NEED HELP
Replies: 4
Views: 1351

Re: BRIDGE TO ROUTING MIGRATION NEED HELP

I M ALSO FACING TROUBLE IN BRIDGE NETWORK
by magnitude
Mon Jul 25, 2011 3:20 pm
Forum: Beginner Basics
Topic: HOTSPOT
Replies: 4
Views: 1375

HOTSPOT

Today i setup hotspot...its working fine.. ether1 - 192.168.1.2 ether2 - 10.10.0.1 Dns ip - 192.168.1.1 Route - dst=0.0.0.0 gateway=192.168.1.1 Users are connected to ether2 My clients are able to ping 10.10.0.1 after logging from browsers...if they logged out 10.10.0.1 says destination net unreacha...
by magnitude
Mon Jul 25, 2011 8:51 am
Forum: Beginner Basics
Topic: Bridging Problem
Replies: 3
Views: 1182

Re: Migration

I m using Bridge network and now i want to migrate to routed network. Our server has a ip range of 203.xx.xx35 to 203.xx.xx.94 with bridge network our clients uses 203.xx.xx.38, 39, 40, 47 till 203.xx.xx.94 to connect to internet. Now i want Client 10.10.1.10 can access 203.xx.xx.65, client 10.10.1....
by magnitude
Mon Jul 25, 2011 8:50 am
Forum: Beginner Basics
Topic: Bridging Problem
Replies: 3
Views: 1182

Re: Bridging Problem

When using bridge (i.e. bridging ether1 and ether2), you should add IP address ONLY on bridge interface. You don't even have to have IP address for the bridge to be working :). But no IP address should be configured on ether1 and ether2 :). Then you can diagnose - check ping from the computer to th...
by magnitude
Sun Jul 24, 2011 3:57 pm
Forum: Beginner Basics
Topic: Bridging Problem
Replies: 3
Views: 1182

Bridging Problem

I m facing problem while bridging Two interfaces(ether1+ether1)Bridge1 20.20.1.1. ethernet1 ip - 192.168.1.2 ethernet2ip - 192.168.1.3 Ether1 is connected to ADSL NAT Server via hub ADSL NAT Server Ip -192.168.1.1 Gateway - 192.168.1.1 Dns - 192.168.1.1 Ether2 is connected to Client Pc ip address- 1...
by magnitude
Thu Jul 21, 2011 5:49 am
Forum: General
Topic: Bridge or Routing Help Needed
Replies: 4
Views: 1283

Re: Bridge or Routing Help Needed

Is your client's CPE's ( are they MT) also bridged ?
CPE is nano station loco 2
The mikrotik is on ap bridge mode and CPE is on station mode.
by magnitude
Wed Jul 20, 2011 6:37 pm
Forum: General
Topic: Bridge or Routing Help Needed
Replies: 4
Views: 1283

Re: Bridge or Routing Help Needed

Is there any way to do this with routing ?[/quote] If you are only using 1 X 433Ah and it goes down you lose 100% of you customers, i would suggest the use of 3X 433AH and uncheck "default forward" in wireless, this will ioslate your clients from each other, routing is better than bridging...
by magnitude
Wed Jul 20, 2011 5:59 pm
Forum: General
Topic: Bridge or Routing Help Needed
Replies: 4
Views: 1283

Bridge or Routing Help Needed

We are providing Internet Acess to 60 users rite now. We just sign an agrement with an ISP..the isp provided me a range of ips 20.20.1.2 to 20.20.1.253 and gateway 20.20.1.1 On fiber cable. The Billing server is situated at ISP Office. Like if we want to make a user we just login to the server by us...
by magnitude
Fri Jul 15, 2011 10:31 am
Forum: Wireless Networking
Topic: Bridge or Routing which one is better.
Replies: 2
Views: 1078

Re: Bridge or Routing which one is better.

If you need all you wireless interfaces on same IP subnet you have to use bridging. Otherwise it is best to use routing. We Have a server at our side with billing software installed and working fine...as i have server i dont want Nat and dhcp on mikrotik router. Here is our network diagram...As mik...
by magnitude
Thu Jul 14, 2011 9:04 pm
Forum: Wireless Networking
Topic: Bridge or Routing which one is better.
Replies: 2
Views: 1078

Bridge or Routing which one is better.

Here we have 3 radios XR2, 3 sector anteenas to serve 100 clients and we want this setup Ethernet<>........ Mikrotik AP RADIO Wlan1, Wlan2, Wlan3...........<>Client CPE 10.10.0.0...........................................................................10.10.0.0 How can i achieve this thing...i know...
by magnitude
Thu Jul 14, 2011 9:55 am
Forum: Wireless Networking
Topic: rb433 configuration
Replies: 6
Views: 1695

Re: rb433 configuration

Imran can i have yours email id....i m stucked at somewhere while configuring mikrotik.
by magnitude
Thu Jul 14, 2011 8:21 am
Forum: Wireless Networking
Topic: what is best configuration for 433 routerboard in ap bridge
Replies: 3
Views: 1412

Re: what is best configuration for 433 routerboard in ap br

i am using 433ah roiterboard with ap bridge mode how can i encrease the tx/rx on router to gain maximum throughput? what configuration i need???? currently i have 15 customer on it and how much customers it can handle. help??? Are u from india if yes...contact me on sanghera dot jatt at gmail dot com
by magnitude
Mon Jul 11, 2011 7:16 am
Forum: Wireless Networking
Topic: How to setup Frequency correctly
Replies: 1
Views: 898

Re: How to setup Frequency correctly

Yes i also want to know how to measure these values...i know about ccq if it is less than the throughput is not soo good coz of many reasons but i dont know on what condition do we need to set tx and rx power rate ?? Also what does it mean Signal to noise Noise floor how to measure these two value.....
by magnitude
Fri Jul 08, 2011 11:51 am
Forum: Wireless Networking
Topic: ROAMING
Replies: 10
Views: 4145

Re: ROAMING

All the sectors need to be on the same frequency with wds enabled on all interfaces and set to ap-bridge. All the interfaces will be registered on each other allowing roaming seemlessly. Bro my radios are in same box do i really need to set same frequencies and same ssid to enable seemless roaming?
by magnitude
Fri Jul 08, 2011 11:50 am
Forum: Wireless Networking
Topic: Help 433ah and 2 radios
Replies: 2
Views: 836

Re: Help 433ah and 2 radios

I m also confused about roaming. Someone says use same frequencies and someone says different frequencies.

Does anybody knows how to change the channels i didnt find anything in winbox.
by magnitude
Fri Jul 08, 2011 10:29 am
Forum: Wireless Networking
Topic: ROAMING
Replies: 10
Views: 4145

Re: ROAMING

All the sectors need to be on the same frequency with wds enabled on all interfaces and set to ap-bridge. All the interfaces will be registered on each other allowing roaming seemlessly. Thanks mate...at my client side i m using TPLINK 543G Ap router...do i need to configure anything at client to s...
by magnitude
Fri Jul 08, 2011 9:51 am
Forum: Wireless Networking
Topic: ROAMING
Replies: 10
Views: 4145

ROAMING

I have a query regarding roaming. I have 3 sectors having same ssid, different frequencies, different channels, ap mode = ap bridge and i want to roam the client to automatically connect to a good signal radio. Is the setup is correct ? or do i need to configure anything at client side ? Someone als...
by magnitude
Wed Jul 06, 2011 7:42 am
Forum: Wireless Networking
Topic: Router Board 433ah
Replies: 2
Views: 835

Re: Router Board 433ah

high power card is not a good idea to overcome interference, higher gain antenna is a better investment. the type of card you need, must be decided based on many factors. please tell us about the planned use - the planned coverage, the type of antenna you will use, the type of clients that will con...
by magnitude
Sun Jul 03, 2011 2:21 pm
Forum: Wireless Networking
Topic: Router Board 433ah
Replies: 2
Views: 835

Router Board 433ah

I m planning to start base station in new delhi. I talked to the supplier of Mikrotik they suggested me Mikrotik 433ah board with 600mw wireless atheros card and another supplier said 500mw wireless card is better. I m still confused with the setup. Please guide me which board and which card should ...