MikroTik

perspetolis

hello.
maybe you don't have hotspot package in system package.
you should import hotspot package in file and reboot router for install.

perspetolis

hi.
you can't fetch your backup file in any address , you must send your file's into a folder and then replace them from it manually.

perspetolis

hi.
you can use from backup file for this.

perspetolis

hi.
you can create 3 queue in queue list and limit each interface withe your traffic request.
you can up priority of phone port above for reach good performance.
see it:http://wiki.mikrotik.com/wiki/Manual:Queue

perspetolis

hi.
the DLNA server running on 2869 port number.
you can add a rule in /ip firewall filter for drop or accept this service.or add mangle and create queue for it traffic's.

perspetolis

hello.
RB1100AHx2 have problem in multi cpu supporting.
you can try with V5.21 or wait to up V6.x stable in mikrotik download center.

perspetolis

Throughput results RB7xx/OmniTIK Series @400Mhz (Ethernet only test) 64 byte frames 512 byte frames 1518 byte frames IP Firewall Conntrack Mode Mbps Fps Mbps Fps Mbps Fps off off Bridging 47.1 92000 358.4 87500 452.97 37300 on off Routing 37.68 73600 294.91 72000 452.97 37300 on off Bridging 35.48 6...

perspetolis

hi.
what is your problem?
explain it.

perspetolis

hello.
you can use from hotspot service.

perspetolis

hello.
it is simple.
you can use from netinstall.
when you forgot your password,you can reinstall routerOS with keep old configuration and reset password.
see this link:http://wiki.mikrotik.com/wiki/Manual:Netinstall

perspetolis

hi
http://routerboard.com/RB2011UAS-2HnD-IN

perspetolis

hello
RB1100AHx2 have problem in multi cpu supporting.you can upgrade your version to 5.21 and test again.or wait to V6.X brings in mikrotik website.
also you can change queue type to multi-queue-ethernet-default.

perspetolis

hello.
you can use from net install and keep old configuration.

perspetolis

hi.
please send export fole for me.
but maybe your ethenet port is disable or you have run same dhcp server in one ethernet.

perspetolis

i have found this problem in V5.x .
if you have x86 with multi cpu,your device don't work correct.
you must disable multi cpu in your device.

perspetolis

1.catch all dns requests: /ip firewall nat add action=redirect chain=dstnat comment=DNS dst-port=53 protocol=tcp to-ports=53 add action=redirect chain=dstnat dst-port=53 protocol=udp to-ports=53 /ip firewall filter add chain=forward dst-address-list=restricted action=drop 2.write a script and schedu...

perspetolis

hi
it is may be happen for your internet banthwith.
if your internet bandwith is full,then your ping time is timeout.

perspetolis

hi.
you must config modem in bridge mode and create pppoe connection in your MK.

perspetolis

Question:There is the possibility, if i insert in the time one day, to use facebook only 1 hour of the day ?
Answer:yes,if you insert in the time one day,it is work only 1 hour of one day.

perspetolis

hi.
RB1100AHx2 don't able to downgrade to v4.17.this router part number only work's with version5.X.

perspetolis

hi
please send for me export of your config.
/export file=config.
you can email that for me.

perspetolis

hi.
please send export from your config.with this code you can export your config.
/export file=config

perspetolis

hi you can edit or view port number of winbox with follow this: ip service print Flags: X - disabled, I - invalid # NAME PORT ADDRESS CERTIFICATE 0 telnet 23 0.0.0.0/0 1 ftp 21 0.0.0.0/0 2 www 80 0.0.0.0/0 3 ssh 22 0.0.0.0/0 4 X www-ssl 443 0.0.0.0/0 none 5 winbox 8291 0.0.0.0/0

perspetolis

hi.
what is your routerboard part number?
you can used from this page : http://routerboard.com/

perspetolis

hi
what is your vpn ip address pool?

perspetolis

hi 1.the best solution is that you remove d-link from your network and connect ether1 routeros to isp and get ip from your isp and confgi ether2 to service for your lan.for do this you must config dhcp server on the ether2 and create nat to your lan to wan. 2.if you want to keep d-link router you mu...

perspetolis

hi
this mean's that pptp request to this router in termination step is faild.
maybe username or password is incorrect or vpn type not correct or ... .

perspetolis

hi
if your signal strenght is good and your wireless card is supported,you can reach that.

perspetolis

hi you have different way. 1.you can run VPN Server In main Router That connected to internet and create vpn connection in your remote pc to get invalid ip address in range that wireless has.with this vpn you can ping and open that ip. 2.you can use from dst-nat.you must config ip firewall nat,dst-n...

perspetolis

hi
you can use from this link:
http://wiki.mikrotik.com/wiki/Manual:In ... properties

perspetolis

hi
please send export ip address and ip route of router with IP:192.168.0.2.

perspetolis

hi for this request you must use from queue group. from this link you can learn much more about this. http://wiki.mikrotik.com/wiki/Manual:HTB you can use this: /queue simple add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s comment="" \ direction=both disabled=no dst-address=0.0.0....

perspetolis

hi
if you do not bridge ethernet and wlan toghether,you can use from DHCP RElay on RB411.
http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Relay

perspetolis

hi
you can use from this link.
http://wiki.mikrotik.com/wiki/Manual:IP ... led_Garden
HTTP walled-garden, menu allows to set authentication bypass for HTTP and HTTPs resources .

perspetolis

hi
please send your ip address export and ip route export and ip firewall nat export.

perspetolis

hi
please check that you select services for your node.for example ping or cpu services.

perspetolis

hi
please send ip address export and ip route export and ip firewall nat export to me.

perspetolis

hi you must only config wireless interface of your access point and connect lan cable from your access point to interface ethernet mikrotik.for sample connect lan cable AP to Ether2 mikrotik.now you must config DHCP server in mikrotik on the interface ether2.with this config dhcp client request from...

perspetolis

hi
your question is not clear.please send more info.

perspetolis

hi
for example,if you want to convert real time to your request,you can use from this script:

:global ts [/system clock get time]
:set ts ([:pick $ts 0 2]. "Hour" .[:pick $ts 3 5]."Minutes".[pick $ts 6 8]."Second")
:put $ts

perspetolis

hi
yes.can do it.

perspetolis

hi
you must set time zone name in /system clock and NTP Client in /system ntp client.

perspetolis

hi.
please send for me wireless config export file.

perspetolis

HI.
WAHT IS YOUR ROUTER PART NUMBER?

perspetolis

hi
you can enable or disable winbox port from ip/service.

perspetolis

hi you must see what service used most cpu.for khow this you must use from tools/profiler. Profiler tool shows CPU usage for each process running in RouterOS. It helps to identify which process is using most of the CPU resources. http://wiki.mikrotik.com/wiki/Manual:Tools/Profiler you can unistall u...

perspetolis

hi.
please send your ip address export and interface export.

perspetolis

hi
on way is simple Queues with ip group.
you must add new Queues and enter your important client ip address in that,and each other of user's.and then set bandwidth for them.
for other's client ,create a new Queues and set bandwidth for them.

perspetolis

hi you must config dhcp server from ip\dhcpserver\lease. DHCP server lease submenu is used to monitor and manage server's leases. The issued leases are showed here as dynamic entries. You can also add static leases to issue a particular client (identified by MAC address) the desired IP address. Gene...

perspetolis

hi you can all your request with web proxy The MikroTik RouterOS implements the following proxy server features: 1.Regular HTTP proxy 2.Transparent proxy. Can be transparent and regular at the same time 3.Access list by source, destination, URL and requested method 4.Cache access list (specifies whi...

perspetolis

hi
you can test many of frequency or Tuning up your sector to reach best signal power.

perspetolis

hi if you want a useful filter rule,can help from this: /ip firewall filter add action=accept chain=forward disabled=no src-address=192.168.0.10 add action=drop chain=forward disabled=no src-address=192.168.0.0/24 add action=drop chain=forward comment="Drop Invalid Connection" \ connection...

perspetolis

hi.
if you want connect remotly from internet to your router , your router must have static public ip address or you must khow your dynamic public ip address that your router have now.if your router doesn't have public ip address ( static or dynamic ) , you can't connect to that from internet.

perspetolis

hi 1.for make the sessions unlimited for the user you must set time for session-timeout Property.(Default: 0s) 2.for guests user's my solution is : create a pool for this user's and assigne ip address from this pool for guests user's and then in ip firewall filter rule create rool to drop access fro...

perspetolis

hi
when you remove default configuration,router ip address delete.
you can only connect to router with mac address.you must choice mac address in win box searching windows.

perspetolis

hi
you can use from walled garden ip list option's.
for more help see : http://wiki.mikrotik.com/wiki/Manual:Ho ... troduction

perspetolis

hi you can do this: /interface vlan add arp=enabled disabled=no interface=ether2 mtu=1500 name=vlan1 \ use-service-tag=no vlan-id=1 add arp=enabled disabled=no interface=ether3 mtu=1500 name=vlan2 \ use-service-tag=no vlan-id=2 add arp=enabled disabled=no interface=ether4 mtu=1500 name=vlan3 \ use-s...

perspetolis

hi you must do this work's: 1.add router in userman with ip address and password 2.add a radius in mikrotik and user manwith same ip and password and then check ppp 3.under secrets in ppp i must enable radius 4.run pppoe server on your ethernet 5.create username and password in userman 6.in radius,c...

perspetolis

hi you can't run more one dhcp server on one interface. but if you want to service on ether 5 you can do this: -------------------------------------------------------- /interface pppoe-client add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 \ dial-on-demand=no disabled=no...

perspetolis

hi
if your router has public ip address in interface you can connect that from winbox or from web.
you don't need to config sntp client for this.

perspetolis

hi whit this script you can get backup and export from your router and send that to ftp or tftp server. ------------------------------------------------------------------------------------------------------------------------------- #Auto Save MY_ROUTER Bandwith Router BackUp & Export to External...

perspetolis

hi you can do simply you must run pptp in your router's set the same ip in two router's for example MT(1),ip address=192.168.1.1/30 MT(2),ip address=192.168.1.2/30 -------------------------------------- if your lan in first router have ip address range 172.16.10.0/24 and in second router have 172.16...

perspetolis

hi Description This Configuration Option may be sent to inform the peer that the implementation can receive larger packets, or to request that the peer send smaller packets. The default value is 1500 octets. If smaller packets are requested, an implementation MUST still be able to receive the full 1...

perspetolis

hi
you can't do this.
you must assign ip address one by one to your interface.

perspetolis

hi
you can do this with distance in ip route.
you must create 2 default gateway,and set distance parametr for each.
for first you set distance=1 and for second set distance=2 and set check gateway with ping.
with this config if first gateway is down,then second gateway aoutomatic is up.

perspetolis

hi. i write this script for any body that want to log dst-address from user's in mangle and send this with email. --------------------------------------------------------------------------------------------------------------------------- :global list ""; :foreach i in=[/ip firewall address...

perspetolis

hi you can create two default gateway to each of adsl gateway. now you must enable ping check in each and set distance for each. first set distance to 1 and second set distance 2. with this config,if first gateway is unreachable,another gatewa automatically active and your traffic send from that. al...

perspetolis

hi
your information that send , isn't Enough.please send for me ip route export and ip firewall nat export.

perspetolis

hi
you can set your message only in system note for show in terminal.and can't create any message for graphic interface only contact with mikrotik office.

perspetolis

hi
please export your ip firewall mangle and ip route and ip address.

perspetolis

hi
if you want to set static username and password for pppoe user's,it is simple.and you don't need to create firewall rule.
you can create a new entry in secret and set your username and password,for ip address,you can create a pool and assigne this pool to the your secret.

perspetolis

hi it is very simple. you must connect your sxt in bridge mode to the your access point. now you must config your tp-link(WAN) in pppoe mode and set your user name and password of pppoe connection in tp-link. now you must config your lan,set ip address and nat your lan with your WAN. now you can con...

perspetolis

hi
you can create 2 user with the same user name and password in secret list.

perspetolis

hi
you can do this with load balancing or nth.

perspetolis

hi
please send Ethernet detail's.

perspetolis

hi
you can run user manager to do this.
in user manager you can run limitation by hours,day,week and more.
for learn more followe this :http://wiki.mikrotik.com/wiki/User_Manager

perspetolis

hi you can mark packet your lan request and then route that request from vpn gateway. sample: /ip firewall mangle add chain=forward dst-address=(your lan ip address) action=mark-packet new-packet-mark=lan-request /ip route gateway=(vpn gateway ip address) routingmark=lan-request with this config,you...

perspetolis

hi
you can't run multiple pppoe from one interface.
in the one interface just run one pppoe.

perspetolis

hi you can add vlan interface in interfaces,for acceess gigabitethernet in vlan,you can set interface vlan in your interface that need. in the ip address , you can set ip in your vlan interface. sample: [admin@MikroTik] /interface vlan> add name=VLAN2 vlan-id=2 interface=ether1 disabled=no [admin@Mi...

perspetolis

hi.
you must mark packet in ip firewall mangle with your ip address(!118.67.200.0/21),and then set queues with 512k and select routing mark that you create.

perspetolis

hi
for do your request you must help from this command:
/system logging add topics=interface action=echo
with this command,if your interface down/up , you can see log in system log.

perspetolis

hi
you must nat your lan from each gateway.
please check your nat.
/ ip firewall nat
add chain=srcnat out-interface=modem1 action=masquerade
add chain=srcnat out-interface=modem2 action=masquerade

perspetolis

hi
you can do your request with help from : http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ

perspetolis

hi
please send for me:
/tool usermanager router export
/tool usermanager custumer export
/ip address export

perspetolis

hi
you can not run pppoe server and pppoe client in the same interface.

perspetolis

hi it seem that you don't copy and paste all the scripts. you must follow whole of scripts in the page. or you copy and paste line by line,that it is't correct.you must copy whole of scripts and paste. for more info read again the help and do correct. http://wiki.mikrotik.com/wiki/How_to_autodetect_...

perspetolis

hi
you can use of bridge interface.
you can add a new bridge interface,and add ether3 and ether2 in bridge.
with this config you can access to each network from another.
for more help , please follow this address : http://wiki.mikrotik.com/wiki/Manual:Interface/Bridge

perspetolis

hi
please send your ip address,ip route,ip firewall nat,and way that you connect to internet (pppoe,dhcp,static route ...)

perspetolis

hi.
you must set distance for your default gateway.
/ip route add gateway=192.168.95.1 distance=1
/ip route add gateway=192.168.51.1 distance=2
with this config,your route policy work good,and any time just one gateway do work.and your router do work good.

perspetolis

please send your trace photo.
your info does't complete.

perspetolis

hi if your request is user name and password for L2TP Client,you can do this in L2TP Client configuration. example of this config is : name=user name of your account password=password of your account [admin] /interface l2tp-client>add name=l2tp-hm user=l2tp-hm password=123 \ \... connect-to=10.1.101...

perspetolis

hi
SXT 5HnD is a low cost, high speed 5GHz wireless device. Dual polarization 802.11n and Nv2 TDMA technology help to achieve even 200Mbit real throughput speed.
for more information go to this address: http://routerboard.com/product/108

perspetolis

Hi
You can find the real cpu usage of each part of router with this command:
/tool profile
with this command you can see the real cpu usage from each part,and you can find best answer for your question.
you can help from http://wiki.mikrotik.com/wiki/Manual:Tools/Profiler .
good luck.

perspetolis

hi
mikrotik log does't store in mikrotik automatically.
you can use script to export ,system log export to a file,and store in mikrotik file's.

perspetolis

hi
you must configure NTP Client in your router and enable ntp client and set mode to unicast and set primary ntp server ip to a valid ip address of ntp server.
you can find ntp server from http://www.pool.ntp.org/.
after enable ntp client,you must set your time zone name in system clock.

perspetolis

hi
you can used from dst-nat to access to your server from internet.

perspetolis

hi
if your ap have a default configuration,you must disable dhcp server configuration in ap.
and conncet ethernet from router to lan port in ap.

perspetolis

hi
you can do this with script.
you must create script and disable site block in 02:00pm for website access to your user's and enable site block in 03:00pm for block it.

perspetolis

hi
if you want to reach to router (A) , you must bridge the interface (ether1) that connected to router (A) with the interface (ether2) connect to your pc in the main router (B).

router A < ---ether1---- router B ----ether2---> PC

perspetolis

Hi
Please Send ip firewall nat export and ip address export.

perspetolis

hi
you can re-install router os with net install program and keep old configuration with reset old password.for do it,follow this link http://wiki.mikrotik.com/wiki/Manual:Netinstall

Search found 101 matches