Try to set the rts threshold to 512 in the AP, and in TP-Link clients. The frame life time...I don't know exactly, I think it's a store time, so how many times will be stored a frame if the router can't send it instantly, before drop them. I don't know the value is milli-, mikro- or nanosec for fram...

Yes it is.
MT1: external to airgrid then Airgrid: airgrid to customer.

Hi,

Try to change the chain from forward to prerouting. I have an SMTP queue with a mangle rule and it works.

I think you mark the connections in bad chains. Try to use prerouting chain instead of input and output.

Do you use routing marks in RB1100AH?
Did you try to ping or traceroute the dude server? Maybe it's a routing problem

Log in with mac address.
With winbox or with mac-telnet
If you do not know the mac address, put "Tab"

Read mikrotik wiki :D or give more information :) What is the customers client? MT or TP-link etc. Where would you do the forwarding? In your gateway, or in the customers client? Port forward example: /ip firewall nat add chain=dst-nat dst-address=x.x.x.x (external address) protocol=tcp (tcp/udp or ...

Try to use EoIP tunnel

If I understand your question, it is not possible with proxy ARP.
What do you want exactly? Why?

Hi! If I understand you problem, you can not create internet access. This is an easy scenario for internet connection with pppoe: Interface ip address /ip address add address=192.168.1.1/24 interface=ether1 NAT privat IP-s to pppoe-out /ip firewall nat add chain=src-nat src-address=192.168.1.0/24 ac...

20 clients? :shock: I now see it. I think, if you would like to work this normally, you have to reduce your clients maximum 10/AP in 2,4Ghz b or g mode without TDMA. You try to enable hardware protection rts/cts on AP and clients, set up the rts threshold, and the frame fragmentation (Hidden node pr...

Make a virtual machine, and install on it the Dude. If the Dude crashed, then reboot the virtual machine. It's around 10 sec and it is independent from the phisical router...
It is not the best, but better than nothing

Try to use nv2 protocol, if the clients are mikrotiks

Why do you use pseudobridge?
Why do not you use station-bridge or station-wds mode?
I don't understand what is the exact topology.

-Use the SXT in bridge mode
-disable defaullt authenticate
-create an access-list rule with the client SXT's MAC-address and a true signal intervall.

If you use L2 manageable switch and using vlans, you can encrypt your data with PPPoE.

My ptp link is UBNT, but I use wds mode many links and them works correctly. I'm using nv2 protocol, and wireless mode 5G only N The worst signal is -75db The channel is totally free. 192.168.80.1 is the PPP Concentrator & Gateway (GW) 192.168.80.2 Ubnt 1 192.168.80.3 Ubnt 2 192.168.80.6 Omnitik...

Hi!

We have an Omnitik and it have 30 active clients (SXT all of them).
The problem, so i try to ping the clients the reply time is 15-80ms irrespectively of traffic. If I'm pinging the omni, the reply is 1-5ms.
Topology: PPP Concentrator -- PtP link (WDS) -- Omni --Clients.

Any idea?

Hi!

Your Dude server is an X86 or Routerboard? Because my Dude server is X86 and I have this problem...