MikroTik

sasskass

Hi, Same issue on CSS326 For the tesing we setup pim and monitored what is going on > From the pim side we see that the quereis are coming, but from source with the 0.0.0.0/0 address but must be unicast. Impossible to define multicast router port, and the queries are not passing the source ip so igm...

sasskass

Hi, To all who have aligment problems! Use this method and You never miss: https://www.aliexpress.com/item/10000m-532-nm-Green-Laser-Sight-Lasers-Pointer-Powerful-device-Adjustable-Focus-Lazer-with-laser-303/32921666322.html?spm=2114.search0104.3.26.496e440aBzECTb&ws_ab_test=searchweb0_0,searchw...

sasskass

NB! All the customers, Please keep away from wireless ARM platform and send back all ordered devices as me did!!! If You start to investigate, your end up in never endindg loop support messages, like they did not know, but they know, and very well understand the trash they bring out to the market......

sasskass

re: haik01 Show me what frequency link, or antrennas costs 4000€ ??? UBNT has even 11Ghz gear for pennies, so buliding the unstable "LEGO" with MT is VERY bad suggestion for person, who is asking an neutral suggestion - guaranteed stable solution... Even Alcoma will be cheaper, than bonded...

sasskass

Hi

Impossible with MT, They even dont have their own asic in 5Ghz RF, so You will end up with interference and unstablility. Rather go ubnt AF5... or as You mean AF24HD

sasskass

Hi

Whats Your max traffice between the vlan-s and what kind of traffice You have (TCP, UDP)?

sasskass

Hi CHR is not ASIC as Cisco or Juniper.. So making x64 will do Your product flexible to hw bugs, as they are common suffering on CHR-s and every other type of RB-s Then You will have a lot of betatesters whome you are not responsible of - Buy now your are testing with loosing them. For me - im tied ...

sasskass

Think Mikrotik must change the licensing policy... Please ask a little fee for the upgrade, rather to ignore the x86 Lets do x86 upgrade for some awsome fee, but you still earn a very big profit and the most important - Respect from Your patriots. Now Your are loosing them... So Mikrotik let the x86...

sasskass

Have used for a long time ur product, Thank You but... x86 scenario multicast + common traffice is only usable with v.6.27 ??? Upgrade to "stable" 6.34 caused to us constant jitters in IpTV - the version up, the nightmare scenario... Tried to change interface queues and buffers, also turn ...

sasskass

Hello, Multicast streams are going from the IGMP enabled switch. I want to send the streams from SXT-Sa to couple of SXT-s. What will be the correct settings for both ap and the client side so, the stream is not broadcasted to all the stations but only those who are joining the stream ? Ubnt is sim...

sasskass

Serious ethernet problem!

What the hell is going on ? Bridged ports and as soon as the device will start transmitting the multicast data the outgoing port will start going down/up ~10 times per minute.

Upgraded a couple of SXT-s and some soho 2g routers, same issue...

Aleksander

sasskass

Think its enough to configure the ubnt:

Mode: Access Point + WDS and Station + WDS

from the station-wds eth side device just tag the vlan-s you want to recieve and bridge or whatever you wish to do, thats all.

sasskass

The dirty solution is to build the ap with wds support where the clients are in station-wds mode. On the ap you will need to install the multicast package and activate the igmp-proxy. Then you must put the incoming (eth) interface as upload interface member in the igmp-proxy and add wds interfaces a...

sasskass

Serious bug with ethernet on SXT G-5HPacD and v6.29.1 - messed up a lot of time and cpe-s.
In bridged mode, cannot access the device from ethernet side. After ~a day of working eth starts blinking 1 per second, reboot does not help.
Downgrading to the 6.28 solved the problem

sasskass

Might have three possible reasons: 1. addressing channels like 224.0.x.x is not good idea - try to stream 239.3.1.2:1234 2. on igmp proxy interface set alternate subnet 0.0.0.0/0 3. on the client side, the address must be written to the vlc like: udp://@239.3.2.1:1234 NB! And also check your connect...

sasskass

WRT54ac
Chronos 3x3

sasskass

Subnet mask or route problem.

/ip adress print
/ip route print

and compare with those you get with dhcp-client. Also look there are no other default route.

sasskass

try stronger power supply - more ampers.

sasskass

If mt firewall rules does not help (http://forum.mikrotik.com/viewtopic.php?f=2&t=58743), use L2 managed switches on the endpoints and turn storm control on.

sasskass

For what company you work? Deliberant? TP-Link? Ubiquity? Ah, not! For Linksys! >>>Dont know your company structure, R&D etc, but something is totally wrong there! I'm happy, you are a good businessman than also work for some other big comanies, like Intel and you "know-how"... >>>P.S...

sasskass

Complaining with no information doesn't send any message. Your post just comes across as someone bitter having a rant. Have you even contacted support with whatever your issue is? What do you want ? We are doing business, not R&D of MT bugs! Time is money and when we pay and loosing the custome...

sasskass

not comparing mikrotik with "shenshen yellow mafia" mikrotik is on the market since 1997 and for a long time it was a good alternative to the high end products like uniper, colubris etc and trash like wrt54, jaht, chronos ;) what i want to tell, is, that its 2014 not 1997 and feeling that ...

sasskass

Complaining with no information doesn't send any message. Your post just comes across as someone bitter having a rant. Have you even contacted support with whatever your issue is? What do you want ? We are doing business, not R&D of MT bugs! Time is money and when we pay and loosing the custome...

sasskass

Complaining is also a way to send messages to Mikrotik. If users complain, there is usually a reason. And we could also benefit from it. All of us. If a long time Mikrotik user like sasskass looses his temper, I would really look what's behind first. Remember when the CCRs came out and it was a col...

sasskass

open your eyes, do you see such topics in ubnt forum ? or cisco forum ? - no, developing is one thing selling the crap in 21 century, where we have to struggle with 4g is loosing the real money while playing the wrt games... as i said you promise features, but they are not working. we buy rb and loo...

sasskass

Hello Mikrotik Team! We have been with you for a long time, but as the time goes on, we feel more and more, that the WRT times are coming back where you are going to sleep with good will and awake with 150~ missed calls - think this is not funny and not East Africa - its Europe, its 21 century! When...

sasskass

...ok, the one quick solutin is: addresses-per-mac increse to 2. But anyway its weird. --- too much details ? Question was simple: In Hotspot under hosts sometimes we see multiple ip-s with same mac (cpe wan side and natted lan side) Why and how to eliminate this to show only the wan side? Aleksander

sasskass

disabled=yes

The rule is disabled, so its doing nothing!

Aleksander

sasskass

Hello, With different ROS versions, currently ROS 6.13 Hotspot under hosts both natted and wan ip (also multiple mac-s) of cpe device are shown. No matter, the cpe is Mikrotik or tp-link. So, we have to delete them from hosts, as many clients have problems authenticate over radius server with mac. W...

sasskass

Of course, we need faster p2p, but i mean for p2mp implementation specially CPE.

If im not wrong, then 24Ghz for p2mp is not allowed on many countries.

Aleksander

sasskass

Hello,

We have dualband Groove, but i have not seen, that someone in the market producing the AP/CPE like complete product with 2 integrated antennas one for the 2,4Ghz and another for the 5Ghz with 2 indipendent radios, so it will be very attractive combination.

Aleksander

sasskass

Hello, Starting from ROS 6.11 there are changes related ethernet: *) ethernet - added option to enable rx/tx flow control (will be disabled by default); *) ethernet - added ability to specify advertised modes for copper ports; Maybe the CCR-s have some eth buffering problems? What about enabling flo...

sasskass

Hello, Try igmp proxy, and change the mac address according to the STB mac - first three pairs. For example Motorola STB-s starting: 00:02:9B:xx:xx:xx, or look at your STB and find the mac. So change your incomings interface mac and enable dhcp client on that interface, 99% you will get correct ip c...

sasskass

Hi, Have dealed with MT-s PIM for a long time and with different kind of hw. Ended up with x86 + couple of RB44 (http://www.interprojekt.com.pl/mikrotik-rb44ge-four-port-gigabit-server-adapter-p-1380.html) The most flexible, and cheapest solution. We have had problems with RB1100AXx2 when we decided...

sasskass

hello
hardware nat means that the nat is done in chip not through the sw in other words its like a gpu video acceleration in games.

Aleksander

sasskass

hello

on ap side set radio into bridge mode and make wds with stations radio mac on station set radio into station-wds mode

also you have to enable wds mode on radios!

aleksander

sasskass

hello,

72cores are not enough

?

...Wait till there will be 10k cores and 1k cores for control these 10k cores

sasskass

hello
still ip/route table in snmp (dude) problem not solved!
sorry but we are currently not working on Dude problems, maybe later in the year

hello

does anyone working on igmp snooping feature - this year ,next year...?

Aleksander

sasskass

Hello, It mostly depends of noise and antenna type you are going to use. If you are alone operating in 5Ghz band and los is good, then it will be no prob. Keep in mind to use only DC grounded quality omni-s. What about frog, then it mostly affects when you are using yesterday badly isolated "le...

sasskass

Hello, For a long time we were using only Mikrotik. It was the only semipro solutin - building the "legos". - it becomes annoying indeed... The strenght of Ubnt was to focus on complete product. Mikrotik sleeped some years before they enter the market. By now we are using both. What can i ...

sasskass

Hello,

Under firewall make dst-nat for that ports

Aleksander

sasskass

Ubnt has better latency (ping) in same enviroment conditions.

sasskass

I also prefer Mikrotik
But in some cases UBNT has something that Mikrotik cant offer
I would like to know what UBNT offers that Mikrotik cannot?

Fully functional igmp snooping out of the box!

sasskass

Hello,

Untagged traffice > eth2 > eth3 tagged vlan3 out, so:

Make vlan3 to eth3 interface
Make bridge
Put eth2 and vla3 into the bridge

You get tagged traffice out of the physical eth3

Set DHCP server running on bridge

Aleksander

sasskass

Hello,

Also i had issue, where the signal and CCQ where ok but the tx/rx levels where not - "final" alligment of sextants solves the problem.

And again doublecheck that both! ends are configured correctly HT chains and Channel width 20/40 (not 20)!
Aleksander

sasskass

Hello,

180/180 are not good TX/RX levels for expected results! Under wireless card HT tab pay attention that both chains are enabled! By default they are not.

Kind Regards

Aleksander

sasskass

Hello,

TX/RX levels are shown under radios registration tab. If you are allowed, you can try to set the superchannel mode to test different frequency ~4900-6100 and set the station side also to superchannel and scanlist according to your needs.

Aleksander

sasskass

Hello,

If you want do control the dhcp with your radius server, you have to activate the dhcp from MikroTik - radius - dhcp as you did it with hotspot.

Kind Regards

Aleksander

sasskass

Hello,

Dear Normis and Janisk please kick your programmers ass asap to implement a working igmp snooping in MikroTik OS! I think a lot of people will be thankful for that advantage, also you will see it in your sales volume!

Kind Regards

Aleksander

sasskass

Ok Guys, Some time ago, there where the queue for the telephone lines and everyone was happy to have a phone line at home. Very soon it becomes the possibility to make the BBS- the fist step to the internet. By now the internet becoming the gateway for the services - like iptv. So if no one in the M...

sasskass

Hello,

And what are the TX/RX levels ? Try to change frequency till you get 300/300

Aleksander

sasskass

Hello, No one is using Mikrotik devices to serve iptv p2mp ? As i said ubiquiti is doing the job out of the box - with multicast encahncement function. Buying a couple of sixpacks we believed that multicast-helper is the same, but it is not ? Looking around the forum i saw that igmp proxy or pim sho...

sasskass

Hello,

What does the cpu shows? System > resources

Kind regards

Aleksander

sasskass

Hello, Just throughput in bridged mode is not related to the license level. You have to tune your radio to take out the maximum. Trie to set the ap to the 5G only N 20/40Mhz nv2-nstream and the other side station-wds or station bridge also with 5G only N and 20/40Mhz and protocol all. Look athe sign...

sasskass

Hello, AP > station bridge. As in wiki on the ap side the wlan multicast-helper set to full. AP-s lan and wlan are bridged together. The cable to the ap is coming from the igmp enabled switch. Problem: all the multicast traffice is flooded to all the stations! We are using ubiquiti devices without p...

sasskass

Hello, Any effective suggestion to protect Mikrotik PIM router from faulty endpoint issues? For example the multicast traffice is adopted to the lowest speed, so the faulty endpoint device started jittering the whole multicast. Especially how to protect it in wireless implementation P2MP scenario. T...

sasskass

Hello, Any effective suggestion to protect Mikrotik PIM router from faulty endpoint issues? For example the multicast traffice is adopted to the lowest speed, so the faulty endpoint device started jittering the whole multicast. Especially how to protect it in wireless implementation P2MP scenario. T...

sasskass

Hello Mikrotik support... Got license key from Your reseller: http://www.eurodk.com/ . The problem is that i cannot use it, cause the purchase procedure takes more than 24h from the point of the first time installation, so the PC shuts down before i can log in through the winbox to paste the key. Th...

sasskass

Hello,

How it is possible to see what is taking the load. I have 6 core cpu and something is taking 100% of the core, how it is possible to see what daemon is eating the cpu.

Kind Regards

Aleksander

sasskass

Hello, Nothing difficult to do, 1. set one end radio Ap or Bridge mode (under wireless), 2. The second one set radio Station-Wds mode (under wireless) 3. Enable static-wds on both ends (under wireless) 4. Create Wds interface and put the mac-address of the Station-Wds radio to Ap or Bridge unit 5. I...

sasskass

Tahnk You Janisk... Everything is working, the problem was the RP address of router (B) 224.0.0.0/4 instead it is nessecary to more detalically specify for example 239.0.0.0/16 Thank you, and everybody go to IpTV to fight against big companies!!!! You can feed the endpoint over multiple wireless lin...

sasskass

Thanks for advise,

I will try to make everything again, step by step, the only thing i cant do is to reboot an source router, cause it is in production, but

Thanks anyway.

Kind Regards

Aleksander

sasskass

Hello, The Mikrotik wiki example is: Sender -- (subnet I) --> Router A -- (subnet II) --> Router B -- (subnet III) --> Receiver My scenario is: Sender -- (subnet I) --> Router A -- (subnet II) --> Router B -- (subnet III) --> (subnet IV)Receiver Till subnet III everything is working, also if i use i...

sasskass

Hello, What i want to do is to "feed" my multicast router (B) form multile RP (router A) over wireless, so that the endpoint router will serve the multicast streams avilable from those RP-s. The schematics: Router A: 192.168.2.1 vlan2 multicast source 20 channels RP1 --- 192.168.4.1 ---- -...

sasskass

Hello, Think there is no restrictions from ros side. The only limitation will be the power of hardware vs concurrent multicast groups can handle. Routing takes a power. traffice itself is limited by network. What is the number of multicast groups it needs to handle and in what bitrate ? I have 150 c...

sasskass

Hello, Read all the posts related to the vendor specific issues, but in my situation it does not help at all. What i am tring to do is to make Amino stb be reachable behind the nat, so there are different Mikrotik dhcp servers giving to the amino the correct vendor paramteres also eliminating of use...

sasskass

Hello,

As you see in RB2 there is a devide point to end users (untagged). Dumb switch is not capable to untag tagged frames

Kind Regards

Aleksander

sasskass

Hello, Have a config: RB1 eth2 192.168.0.1 vlan4 192.168.4.1 vlan5 192.168.5.1 the lan cable is going from RB1 eth2 to RB2 eth1 input --------------------------------------------> RB2 br1 (eth1, eth2) 192.168.0.2 vlan4 192.168.4.2 vlan5 192.168.5.2 br2 (vlan4 eth4) > customer 192.168.4.3 br3 (vlan5 ...

sasskass

Hello Peolple, I do not need theoretical answers, but answers from reality. My vision is that there will be ideal LOS between AP and Client and the coverage area will be not more than 1-2km. The multicast stream i mean will be iptv mpeg2 ts 4-6Mbit/s and i exept you know, that channel zap (changing)...

sasskass

Hello People, Yes, we had things like you :) and it caused for us a lot of misunderstanding for a long time. As there are lot of competitors also, we were sure that it was some kind of packet injection from some competitor, so we even contacted the police. And what we discovered cheap and crappy chi...

sasskass

Hotspot is running on RB600, clients (rb411) are logging in by mac authentication. Soft is both v3.30. We noticed this issue in other places also, behind mikrotik cpe nat.

sasskass

Hello people, Web pages are opening ok, youtube is running for some seconds and then halt, downloading of files stops after some seconds We are running standard mikrotik hotspot setup and noticed strange issue only with mikrotik cpe using standard masquerade. Other routers are working normally. What...

sasskass

Thanks guys for an advice.

sasskass

Hello, I suggest you to stream in multicast with igmp. Multicast i mean using right multicast subnetting. Streaming UDP may kill your wireless ap as it uses wery small packet. At the end you have to have IGMP snooping capable device. Also it is nessecary to have PIM/IGMP proxy querier, for that your...

sasskass

Hi, Some time ago we noticed that strange things are happening on many wireless AP-s we have. Affected are only 2.4Ghz. The mac adress (see picture) periodically changes, also we do not have customers with such mac addresses. Tried to disable default auth and forwarding on the wireless device, permi...

sasskass

Yes, it was problem for us also implementing hotspot with time limit because mt without user manager does not have such option. as we dont want to use mt-s usermanager found that freeradius sql counter make the trick. sqlcounter accessperiod { counter-name = period check-name = period sqlmod-inst = ...

sasskass

Thanks a lot for the information!

Aleksander

sasskass

Our network is segmented with different vlan-s and we want to implement authentication system using MT-s hotspot + external radius. Fo example we have MT running on x86 L4 and 20 different vlan segments. As i understand, the only way follow the segment separation is to run hotspot on every vlan sepa...

sasskass

Hello, for the MySQL there is the sample for the sqlcounter "expire_on_login". But as my current schema is in PostgreSQL maybe someone can help doing things the right way :) ... ? For MySQL: sqlcounter expire_on_login { counter-name = Expire-After-Initial-Login check-name = Expire-After sq...

sasskass

Hello, for the MySQL there is the sample for the sqlcounter "expire_on_login". But as my current schema is in PostgreSQL maybe someone can help doing things the right way :) ... ? For MySQL: sqlcounter expire_on_login { counter-name = Expire-After-Initial-Login check-name = Expire-After sq...

sasskass

Hello, Having strange issue using R52h and rb433 acting as AP in 2,4Ghz B. in random time the clients lost internet, their rssi is ok and they are connected normally, rb shows rssi-s as usual, but no ping, no traffice at all. Rebooting the rb does not solve the problem - disableing and enableing R52...

sasskass

Dont include wds into your bridges on both sides, put VLAN instead

sasskass

Hello, Both ends RIC522 + RB333 and R52 in wds bridge, connection tracking off. Distance 10 kilometers Rssi both ends ~ -70-72 48Mbps/36Mbps stable for months. Throughtput w turbo 20/20 wo turbo 15/10 real traffice no problem. The anomaly started as we changed the RB333 to RB433AH in RIC522C + R52H,...

sasskass

Hello, Read some topics about isolating possibilities on lan segment and impossible without vlan switches was the only answer i see but in freebsd im using the method that in theory is impossible. I see this method is used by 1 isp who has big lan. For example i have subnet /24 and in dhcpd config i...

Search found 84 matches