Community discussions

MikroTik App

Search found 13 matches

by jeck009
Tue Jun 25, 2013 2:17 pm
Forum: Wireless Networking
Topic: OS 6.1 Wireless Advance Channel
Replies: 5
Views: 2793

OS 6.1 Wireless Advance Channel

I have upgraded my RB800 board to 6.1 OS. Link distance is 16km. Bandwidth is 60/60Mb with stable data rate locked at 180/180Mbps.CCQ 100/98%. However,i cannot able to configure custom channel width. Below is error msg. I have understood from MUM presentation that you can bond 30Mhz custom channel w...
by jeck009
Wed May 02, 2012 8:43 am
Forum: Wireless Networking
Topic: Arp & Link monitoring
Replies: 2
Views: 1850

Re: Arp & Link monitoring

Steps.. 1) Make 2 P2P transparent Link. 2) Create bonding interface and add the 2 Ethernet interface of the link. http://wiki.mikrotik.com/wiki/Manual:Bonding_Examples 3) Assign IP address to each bonding interface. 4) Select ARP monitoring and under the target ip , assign the bonding interface ip o...
by jeck009
Tue May 01, 2012 1:03 pm
Forum: Wireless Networking
Topic: 46 km link result in Saudi Arabia.
Replies: 24
Views: 7367

Re: 46 km link result in Saudi Arabia.

Dbii F50N Pro.
by jeck009
Wed Apr 25, 2012 8:23 am
Forum: Wireless Networking
Topic: 46 km link result in Saudi Arabia.
Replies: 24
Views: 7367

Re: 46 km link result in Saudi Arabia.

Manually i put 46km (Google Earth measurement) but it comes 44km.
by jeck009
Tue Apr 24, 2012 3:14 pm
Forum: Wireless Networking
Topic: 46 km link result in Saudi Arabia.
Replies: 24
Views: 7367

Re: 46 km link result in Saudi Arabia.

After upgrading 5.15. CCQ is very stable. On 40Mhz i got 90Mbps total link capacity.
by jeck009
Tue Apr 17, 2012 8:45 am
Forum: Wireless Networking
Topic: 16 Km 80 Mbps Total Capacity - Saudi Arabia (Jubail).
Replies: 6
Views: 2342

Re: 16 Km 80 Mbps Total Capacity - Saudi Arabia (Jubail).

Version:5.14.

WDS with NV2.

F50N Pro card from Dbii.

Regards,

Jaweed Patel.
by jeck009
Sat Apr 14, 2012 2:51 pm
Forum: Wireless Networking
Topic: 16 Km 80 Mbps Total Capacity - Saudi Arabia (Jubail).
Replies: 6
Views: 2342

16 Km 80 Mbps Total Capacity - Saudi Arabia (Jubail).

Hi All,

Below is test result of P2P link working on Nv2. Live traffic is moving 60 Mbps and i added 20Mbps more.

UBNT 34dBi Dish with RB800.

Regards,

Jaweed Patel.
by jeck009
Mon Apr 09, 2012 8:50 am
Forum: Wireless Networking
Topic: 46 km link result in Saudi Arabia.
Replies: 24
Views: 7367

Re: 46 km link result in Saudi Arabia.

I changed Nv2 to Nstream. Result is very poor. Normal ping is 1ms.

but when i try to put 5Mb of load CCQ start jumping from 90 range to 25-35. and some times it disconnect.

What i have noticed is that from AP side RX CCQ is very stable. It remains 100% but tx CCQ drops to 20 and than it disconnect.
by jeck009
Mon Apr 09, 2012 8:17 am
Forum: Wireless Networking
Topic: 46 km link result in Saudi Arabia.
Replies: 24
Views: 7367

Re: 46 km link result in Saudi Arabia.

Sorry for delay reply, because of the time difference.

I have installed below hardware.

34dBi UBNT dish, RB433AH and Alfa cable.

Nv2 over 20Mhz.

Sometimes during the day signal fluctuate from 44 to 60, this is because the link travels over the sea.
by jeck009
Sun Apr 08, 2012 2:18 pm
Forum: Wireless Networking
Topic: 46 km link result in Saudi Arabia.
Replies: 24
Views: 7367

46 km link result in Saudi Arabia.

Hi All,

We have installed 46 km P2P wireless link. 80 % of the link goes above the red sea (Saudi Arabia). With different modulation(HT MCS) we got below link result.
by jeck009
Mon Jan 23, 2012 1:16 pm
Forum: Forwarding Protocols
Topic: Bonding/FAilover with 2 VPLS tunnel over 2 physical eth int
Replies: 1
Views: 1526

Re: Bonding/FAilover with 2 VPLS tunnel over 2 physical eth

Guys,

I need your assistance.

Regards,

JP
by jeck009
Sun Jan 22, 2012 2:11 pm
Forum: Forwarding Protocols
Topic: Bonding/FAilover with 2 VPLS tunnel over 2 physical eth int
Replies: 1
Views: 1526

Bonding/FAilover with 2 VPLS tunnel over 2 physical eth int

Hi Everyone, I want to get maximum bandwidth between two locations. I have installed 2 Ubiquiti point to point transparent wireless bridge. Each carrying 30/30Mbps traffic. My Requirement: Each P2P link should carry one VPLS tunnel and bonds this two vpls tunnels together. Eg. P2P Link 1 tunnel id 1...