MikroTik

enrique

it is done. I did it.

RB have to be in routed mode, no bridged.

thank you all

enrique

what happend no body dare?

enrique

thank you egate. one more thing after the first rule, the reject one how it would be? I mean the second rule will be like this first one, but change actio to drop. is that right? /ip firewall filter add chain=forward dst-address=209.85.129.99 dst-port=80 protocol=tcp action=accept /ip firewall filte...

enrique

hello all. I want your help. I have a RouterBoard as bridge transparent AP, simple with not conflict, no hotspot, no web proxy and totally open. ADSL-----RB AP))))))))) wireless user. user are connected via wireless. ´till here everything is working fine. Now I just want those user just to see one i...

enrique

hello all. I want your help. I have a RouterBoard as bridge transparent AP, simple with not conflict, no hotspot, no web proxy and totally open. ADSL-----RB AP))))))))) wireless user. user are connected via wireless. ´till here everything is working fine. Now I just want those user just to see one i...

enrique

Ok I´v got it.

thank you one more time netrat.

regards

enrique

thanks netrat for your cooperation but I did check up this table.

it is not what I looking for.

regards

enrique

Hey there,

does some body know how many user can be associate on Mikrotik Router.

what is teh meaning of Max Station count?

regards

enrique

Thanks Netrat,

But in the Bridge which interface should be brigdes, the wlan and WDS or the ether1 and WDS?

regards,

enrique

Has anyone tested Mikrotik's VLAN support over the Wireless ports (Atheros) for large packet support (1500 bytes + additional bytes for VLAN )?

Does VLAN really work when is cofigured on wlanx interface?

a help will be appreciated.

regards,

enrique

nice post,

but next time in english, pleaseeee.

enrique

hello janisk,

there is something I don't understad so well. you said: "ensure that you have upgraded your routerboards' firmware before upgrading routeros"

upgrade Routerboard and upgrade RouterOS, where is the the quality of the differece or distinguishing feature between?

regards

enrique

Ok Rudy,

I understand you. sorry about your boards.

I always upgrade my rb500s (532) via ftp. in this case I've upgraded just 4 units and those units have not failed. only one of them has the 3.3

Let's see what mikrotik does about that issue.

regards.

enrique

Note for upgrades from 2.9 to 3: We have reports of some 2.9.xx upgrades to v3 failing on upgrade on RB500 where the board becomes non-functional until Netinstall. We have not found any solution yet, it is advised to ensure physical access before upgrading. when mikrotik says the rb500 gets non-func...

enrique

Note for upgrades from 2.9 to 3: We have reports of some 2.9.xx upgrades to v3 failing on upgrade on RB500 where the board becomes non-functional until Netinstall. We have not found any solution yet, it is advised to ensure physical access before upgrading. when mikrotik says the rb500 gets non-func...

enrique

valypetre,

Good signal levels and high pings means interference.

regards.

enrique

hello SurferTim,

I solved the problem. WDS was the answer, of course mikrotik`s team helped me out.

thank you.

enrique

hello carullos.

my scenario is done already. just did some setup moves and reach the top. Mikrotik`s team helped me of course. WDS is the answer.

station mode is not compatible with address 4.

regards.

enrique

Thank you for you answer.

the cpe acts as station mode. actually the PC recieves the IP from the master hotspot but once you open the browser and type the gateway IP to get authenticate the browser do not answer that call because always say the page cannot be desplayed.

regards.

enrique

Thank you for you answer.

the cpe acts as station mode. actually the PC recieves the IP from the master hotspot but once you open the browser and type the gateway IP to get authenticate the browser do not answer that call because always say the page cannot be displayed.

thank you.

enrique

Hello guys I have a little problem with my hotspot. Here is my scenario: MKRouter (the hotspot serv.)________MKRouter (as CPE)________PC From PC side I don`t any IP from hotspot. maybe I´m missing something. How I do have to configure de MKrouter CPE to get the PC working well. help please. thank you.

enrique

Hello guys I have a little problem with my hotspot. Here is my scenario: MKRouter (the hotspot serv.)________MKRouter (as CPE)________PC From PC side I don`t any IP from hotspot. maybe I´m missing something. How I do have to configure de MKrouter CPE to get the PC working well. help please. thank you.

enrique

hello davidw.

come on Post your solution here, it is very interenting.

regards

enrique

Thank you very much Stefan.

enrique

yes there is not. I'm waiting for VPN wiki too.

thanks anyway.

enrique

what.......

enrique

Thanx maximan

enrique

hey, newbe here,

vlan?
what is it for, and how to.

thanks

enrique

Hi, Chrifamo. A common problem encountered when mobile users connect to public access services is that although email can be retrieved successfully, sending email will fail. The reason for this that most ISP mail systems will not accept email from unknown network locations as a protection from abuse...

enrique

Hi gilbertoandrade,

If you need a deep information help you have to be more explicit, because of your explanation.

regard.

enrique

hi deniso.

500 series can solve your project. don't hesitate buy it.

enrique

Kala,

Uuhmm, we need for info to reply something.

enrique

Uldis,

How do i attach and image to show it here.

regards

enrique

Hello uldis,

Does the CPE licenses (Level 3) has the DHCP features? in other words, I just want to know if a unit with a CPE license can be apply to works as DHCP client.

regards

enrique

The best solution is MT accept that there is a problem, it is pathetic seing to a lot of users trying to solve a vendor problem

normis
uldis
sergejs

they all are=Mikrotik, and believe me thay are great. If you have any problem they will be there to solve it.

regards,

enrique

thank you for your reply MyThoughts

regards,

enrique

Hello mipland,

Nice job and forget about Swedish.

Keeping posting.

regards,

enrique

verify the MTU.

enrique

Sorry for the late.

Ok sergejs I will try 2.9.44 version.

Thanks a lot guys for your cooperation.

regards,

enrique

Hello guys,

Sergejs,

yes the users get autehticate indeed. and the firmware version we are using is 2.9.30.

enrique

Hi Normis, I mean every time user connect directly to the ADSL Lan side, the user can use the hotmail, or can have access to their email server. but If a user connects via wireless using the Mikrotik hotspot service user can't have access to any emails services. not recieving and not sending, is lik...

enrique

Hello guys, here I describe my incidence: I have many problem every time I configure the hotspot service. but the user can't have access to any email services including webmail services like hotmail.com. Is kind curious because is the user connect direct to the ADSL router via ethernet the email wor...

enrique

Did someone know something.

enrique

I´m having freezing incidence when connected the RouterBoard 44 to a AMD PC motherboard environment. but when is conencted to a motherboard Pentium environment the PC works fine. I short words the RouterBoard 44 makes not the AMD PC to boot up, and even a Ctrl+Alt-Del doesn't work, but if take off t...

enrique

You have to use WDS for transparent option or Routed option.

Take a look for WIKI.

regards,

enrique

Hello fellows, We have a bunch of Mikrotik as an Access Points and I need some help on configuring them. What we are trying to do is setup a lot of virtual access points on each radio and redirect users to different web pages when they log into the different virtual access points. I could successful...

enrique

Sofia,
If you make a Croqui will be better to explain.

enrique

hello Hajid, In such case use WDS between them, but to take this working properly use WDS-slave or WDS-Station instead of Station operation concerning bridging mode. But is your network is routed then use Station mode. Ethernet over IP (EOIP) is better when is physical connection. and if you want to...

enrique

Beccara.

nice link, but would be better if you give us more clue about it. Like other guys here said, is there a trick?. so, what is the frequency you set for that link in turbo mode?

Regards.

enrique

Thanks a lot guys,

Right away I gonna try your suggestion. I´ll let you know how it goes.

regards.

enrique

Hello all, I’m trying to deploy a routed wireless link concerning 4 RouterOS units and 802.11a (5 GHz) signal. As you can see on the lines below, I have tried everything and no positive solution comes out. If some one here in the Forum has a clue I will appreciate for life. Regards, ether1 192.168.1...

enrique

You are right Hellbound

enrique

Thanks a lot guys, I will try your suggestion right now. I will uptade you if this solution works.

But would be better if I put here just a .jpg image so that way you get a nice view.

Regards,

enrique

Thanks for your reply.

the netmasks are 255.255.255.0

enrique

Hello all, I’m trying to deploy a routed wireless link concerning 4 RouterOS units and 802.11a (5 GHz) signal. As you can see on the lines below, I have tried everything and no positive solution comes out. If some one here in the Forum has a clue I will appreciate for life. Regards, ether1 192.168.1...

enrique

mambotech or marc.

Please see the tutorials at 34t.com

enrique

mambotech or marc.

So if you have some compliance about Lobometrics please contact us.

enrique

Alkaida Get rid of Dlink DWL-520

enrique

Thanks Jarosoup

enrique

Hi DirectWireless,

So you have the Xp pc via DHCP client connected to ether1 and wlan 1 in DHCP client mode associated to wireless AP. please be more especific.

enrique

No problem Equis, I have no choice.

thank you anyway.

enrique

When release a Winbox GUI manual once for all.

enrique

shielder,

Try to move a couple of meter your client´s unit away from the FM tower. and see how it goes.

Regards

enrique

Hello everybody.

My question is how I set long-cable= yes in winbox:

long-cable (yes | no; default: no) - changes the cable length setting (only applicable to NS DP83815/6 cards). For cable lengths of more than 50m, set "long-cable=yes"

Please need help.

enrique

Hello all,

can somebody explain me the channel bonding concept.

Regards

enrique · J_RaD Have you tried 2.9.20 wimbox version?

J_RaD

Have you tried 2.9.20 wimbox version?

enrique

Thanks for the link provided, I´ll check it out

enrique

verify if all the CPEs are running atheros chip. ´cause the test I made WPA only runs better with atheros environments.

Regards,

enrique

I thing you have to set a better DATA RATES or try to apply a Bandwidth policy and see if it help.

regards,

enrique

Hello all,

Please has anyone got a graphical mikrotik manual, I mean i you have a winbox manual.

Regards

enrique

Check the Data rates to get high Mbps

enrique

Well the -85 signal cannot be fine, because with this value you would never can pass traffic. the -75 and -60 and so on is the tipical Ideal

Search found 72 matches