Community discussions

MikroTik App

Search found 6 matches

by NoName
Fri Aug 31, 2012 8:06 pm
Forum: General
Topic: Feature Request TR-069 CPE
Replies: 87
Views: 51511

Re: Feature Request TR-069 CPE

+1 for implementing TR-069 (CWMP) on ROS!
by NoName
Sat Aug 18, 2012 10:32 pm
Forum: General
Topic: P-t-P 2x SEXTANT 5HnD, VLAN tagging, multicast
Replies: 1
Views: 1093

P-t-P 2x SEXTANT 5HnD, VLAN tagging, multicast

I have a rather a specific problem with a point to point installation of two SEXTANTs. All the traffic from my network should be VLAN tagged towards the provider therefore I created a new VLAN on ether1-local interface and bridged it with wlan1; on the second point (e.g. the other SEXTANT) I bridged...
by NoName
Fri Jul 13, 2012 4:04 pm
Forum: RouterBOARD hardware
Topic: RouterBoard multiple MiniPCI device naming
Replies: 4
Views: 1555

Re: RouterBoard multiple MiniPCI device naming

of course that would work... but usually the devices are named by the slot number they're plugged in... I assume that in case I insert the first adapter in the lowest slot, boot up the system - the card will be named wlan1... shut it down afterwards, insert the second adapter in the middle slot, boo...
by NoName
Thu Jul 12, 2012 6:58 pm
Forum: RouterBOARD hardware
Topic: RouterBoard multiple MiniPCI device naming
Replies: 4
Views: 1555

RouterBoard multiple MiniPCI device naming

Just got a brand new RB433 with two R52n-M cards... Prior connecting the antennas I just wanted to find out which adapter will be designated wlan1 and which one wlan2... Unfortunately neither board's user manual, this forum or even Google could provide me with an answer. I can see the MiniPCI slots ...
by NoName
Mon Feb 27, 2012 11:05 am
Forum: General
Topic: Quickset (new in v5.12)
Replies: 76
Views: 54162

Re: Quickset (new in v5.12)

sergejs, I'm using winbox and quickset (I think the only other way of using quickset is via webfig - I have webfig disabled)

I'm not sure it's wise for me to delete the IP address whatsoever as I'd be unable to connect to RB (RB711-5Hn doesn't have a serial port)...
by NoName
Sat Feb 25, 2012 10:05 pm
Forum: General
Topic: Quickset (new in v5.12)
Replies: 76
Views: 54162

Re: Quickset (new in v5.12)

I don't think quickset is implemented okay, at least in ros5.14 on rb711-5hn. I belive the IP address should be linked with bidge device (bridge1) and not with ether1-local device. In case I manually set the IP on bridge1 and delete the one on ether1-local, quickset doesn't recognize the IP address ...