About two weeks ago I've upgraded RB3011UiAS from 6.49.8 to 7.11.2, CPU usage went up to 100%, there were significant packet loss. Going back to RoS v6 (exactly 6.49.10) solved the problem. Upgrade was made on 2023-10-24 early morning, and downgrade on 2023-10-26 same quite early. Is this normal beh...

On 6.42.7 problem remains. Tested on CHR platform.

Since some time we 've got such problem with duplicated tools in Dude. Duplicated-tools.jpg Custom tools that were duplicated are easily removed. But built-ins can't be removed by any user, neither helps clean install and just import of dude database. Does anyone else have similar problem, and hopef...

DHCP Lease assignment based only on partial MAC (i.e. only on OUI) / hostname / received DHCP Option 82 Info (this one is the most important).
IPsec Virtual Interface (that would allow routing to other networks through tunnel)
DNS records based on zones

In the v6.37rc24-27 there is a problem with server crash after displaying any device popup window. I.e. you hold cursor for a moment on any device on any map, after taking it away from that device, server crash and then recovers itself after few seconds.

Is there a way to multiply by float number in RoS? How can i get in RoS result of i.e.: :put (6*1,2) Currently console gives me this: 6;2 And the result of course should be 7,2. I cannot use dot presentation, due to RoS reading it as ip address. If somebody wonder what i'm trying to do, i want to ap...

I know it's feature request, but solution for now is adding such script as lease script in DHCP Server:

Hi, I recently bought my first Mikrotik and now I'm trying to set up IPSec/XAUTH connection from my Android device to Mikrotik. I hope I'm correct in assuming pre-shared-key-xauth is correct peer authentication method ? If so... I have a problem. This auth method isn't available using winbox, and w...

where can i download the old router OS? and the old Firmware?


Thanks

Keep in mind that on RoS 3.30 there is no nv2.

Wysłane z Nokii 3310

For RB 100 series the only right version is ros 3.30.

Wysłane z Nokii 3310

Yes, this is true. Do not "save" passwords on a PC where you are not the only user. We are working on a new Winbox where you will be able to set a master password, that will encrypt your passwords. Do u plan to add some new features (i.e. storing personal default column selection) to WinB...

U can do it with mangle and queue tree.

Wysłane z Nokii 3310

Cause it's simple and it does the job. It used to work till version RoS 6.1. After that it's like I've posted. Here is link (in polish, but u can always use google translate;)): http://www.inetech.pl/?info=products&id=4 EDIT: Here is screen from properly working version at one of previous RoS: U...

UPS probe still (since RoS 6.2) doesn't work.

U need managment switch to use it like that, and then set up some vlans to work.

Goal: Setup for client VPN based on IPsec, as roadwarrior, with personal certifcate for each user. Client app is Shrew Soft client (last version 2.2.2). Problem: RoS can't handle multiple instances of ipsec peer with only difference is certificate. With both ipsec peer active (not working, but only ...

Well, it should be like u write, but it isn't. In fact if u set ipsec policy as template (template=yes) RoS ignores every other setting except dst-address, group, src-address. But u can go around and set default proposal to match your roadwarrior setup, and create second proposal as substitute for d...

Command: doesn't export section ip ipsec user.

On both sides there are RB 411. CPU is around 10% at station side, and 35% at AP side during the highest traffic.

I did set up wireless transparent bridge as written here: http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks_using_MPLS . As i try to check real throughput of this connection, it shows me something around 12Mb/s. When i change only the type of L2 bridge to one based on WDS, real through...

I also tried that, with pfifo-limit=1 and max-bandwidth of queue set to 2M there is only around 300k achievable. IMO there is no way to achieve 100% shaper in RoS as described in wiki. Some packets always will be queded (even if max-bandwidth isn't reached).

I did that, and it doesn't work as described in wiki. When I set queue type to pfifo with pfifo-limit=0 (according to wiki it should work as 100% shaper), it's impossible to reach max-bandwidth of queue. It drops everything, and none traffic is passing.

I want to shape traffic without any queded packets. Any packets above the limit should be dropped immediately. Just like it is described in http://wiki.mikrotik.com/wiki/Manual:Queue_Size as 100% shaper. But when i set queue size to 0 the traffic stops. It doesn't matter which type of queue i choose...

Each user profile in Dude should have it own password set w each device (it would be even better if admin can select whether specific user can use default password set, or should have his own). Now every user in Dude uses the same password for devices as others.

Well, I've checked it once again and i've found what was wrong. The only problem was with (yes, yes i know;) ) file name. Variable $exportfile was right, but this was the file name without extension '.rsc'. Correct file was created on ftp server but without .rsc extension, that's how i've figured it...

Can u paste your sample here? I will check your solution soon, but now i don't see what's the difference of dividing one script into two others invoked by third one.

Everything is ok with file name. There is a problem with complex path as argument of 'dst-path='. It seems that i cannot pass complex path via variable. If i use it from CLI without variables it works, but when i put variable to this option it returns: status: failed failure: cannot open file which ...

I've got a problem with dst-path argument in my script. I need to upload file to the specific directory on my server, and it's not working as it supposed to. Here is source: :log info "export beginning now" :global exportfile ([/system identity get name] . "-" . [:pick [/system c...

/export compact

doesn't export changes made under default items of /system logging actions. It's crucial for remote logging ip address. The same was on previous 5.x releases.