Dear All, I am running MT OS 5.12 on pc hardware. I have some users who are using internet for online gaming. They asked me to open the ports of 28960, 11155, 11166 as they have founf the ports block by firewall. I have gone through the mikrotik firewall rules and no such rules in my router that blo...
Dear all Have a good day. I have a problem with mikrotik router OS ver: 5.11 (Rb433) running arp-reply only at local-interface where ipv4 are arp-enabled & ipv6 is not working. If I disabled (make the ethernet interface property from arp-reply only to enabled) then ipv6 works ! Any clue ? Please...
Dear richarr68 I have implemented such network setup with mikrotik in wired environment a few years ago in a public university in my city which still works excellent. what I did: i used ip>firewall>mangle and then mark all packet based on source IP & define address list in ip>firewall>address li...
Dear fewi, I have attach my network diagram for your better understanding. I have connected with Router-B3 and my ipv6 address is 2001:470:fa12:b3::2/64 & gateway is: 2001:470:fa12:b3::1 From Router-B3 new terminal console I can ping to outside world, say 2001:470:20::2 with my src-address: 2001...
I have put an entry in ipv6/ND and check the IPv6 TCP/IP setup in my pc which is still not working. Its necessary to mention here that I have setup the Lan interface property arp: "reply-only" for bonding ip & MAC for ipv4 users. I have implement ipv6 on the same interface. Any suggest...
Dear All, I have implement ipv6 address spec in my router running mikrotik router os version 5.4 in RB4500. I have ipv4 arp entry in my mikrotik and it running just fine. when I try to put this command I got error: /ip arp add address=2001:470:fa12:b3::2 mac-address=00:24:1D:3D:9B:D2 interface=lan /...
this problem happen when bridge, pppoe services are running on the same box, i.e x86 machine. I had 3 interface. 1-wan, 1-lan-pppoe-server, 1-bridge. If I fix the traffic limiting issue with pppoe users, bridge interface can not control/limit traffic and if bridge interface is fixed to control traff...
Dear All, I have found a problem in Mikrotik Router OS (example version is 4.6 for intel x86) which is: 1. If I disable "Use IP Firewall" in bridge settings, all simple queues for bridge are not working and not limiting traffic ! But PPPoE USers are ok. 2. If I Enable "Use IP Firewall...
Hi all, I have a starnge problem with Mikrotik Router OS version 4.5 running in PC. I have 3 interface. 1. wan 2. lan 3. bridge If I disable "use ip-firewall" in bridge settings, all PPPoE users traffic shaping just work fine while Users passing through bridge interface didn't manage bandw...
yes ! that was the problem in bridge settings ! I disable "USe IP firewall" options and after that all
PPPoE users are just fine. Thanks a lot for the great info.
I have found the issue last. Its was a power related problem. I fixed it by replacing with a high power POE (24V 5.0Amp) and good quality CAT-5E UTP cable having low resistance at 150 feet length.
both KSX30S mini pci cards needs 7 watts each. Now its ok.
if you disable those proxy rules in RouterOS, then all works? I suspect you have to add additional configuration in your Squid so that this kinf of redirection works. I make modification to squid and make it to work as "transparent" and also make mikrotik to work as dstnat rules for passi...
Dear all, I am running Mikrotik Router OS version 4.5 with a x86 Intel based PC hardware. My problem is all PPPoE users bandwidth are not limiting. I have to add a simple queue for those users ! Rest of users running my simple queue are just fine. Any suggestion ? please ... Regards, Shah Ahmed Raqu...
Hi everybody, I havea problem with my Wireless access point running with the following hardware configuration: Main Board: Mikrotik Router Board RB433AH Router OS: 4.4 Router Board Firmware: 2.23 Mini PCI cards : Valemount KXS30SG (1000mW)=2 Nos and R52H = 1 nos. The problem I am facing now with shu...
Hi, This is the config in MT (v3.28): chain=dstnat action=dst-nat to-addresses=203.112.204.241 to-ports=3128 protocol=tcp src-address=10.0.0.0/24 dst-address=0.0.0.0/0 dst-port=80 My MT wan port IP is: 203.112.204.229 I got the following error in browser if i try to browse www.yahoo.com or anything ...
I want to redirect all http traffic (IP network 10.0.0.0/24) from mikrotik box to a remote proxy server (203.112.204.241 and port 3128) running in linux/freebsd box.
But, the mikrotik routers in my services areas were running very well when it was in version 3.11. After upgrading it to 3.20 i have got complain from my customers. While my Squid proxy server was running in FreeBSD 6.3 and squid version 2.6 ! I didn't change the squid version or OS on my proxy serv...
Hi, I am getting gateway timed out in mikrotik running on 3.20 and users are unable to surf http pages ! I have enabled web-proxy in this setup and dst-nat to redirect traffic to external squid proxy. I saw also there are unknown squid log at linux server like 65.112.33.4 ............... 67.34.33.3:...
Hi, I am running Mikrotik Router OS 3.20. I need a simple queues config which ensures unlimited local area/lan traffic for all my IP networks which are 172.16.0.0 to 172.31.0.255, 10.0.0.1 to 10.1.0.255, 192.168.10.0 to 192.168.13.255 and want to limited traffic for global internet for these IP netw...
Yes you can use mikrotik as router from Satellite Modem ConTech CDM-570. But for that you need a
Syncronous Serial PCI Card attached with the PC and the serial card with connect with Sat Modem via cable.
Though the serial pci cards are expensive in compared with Cisco Serial cards.
Dear all, I have got an error running the scripts to send system backup from mikrotik. my script is: /system backup save name=proroute_sustgw /tool e-mail send to="support@sol-bd.com" subject=([/system identity get name] . "RouterBackup") file=proroute_sustgw.backup Error message...
i need a simple configuration of PCQ for my ip network of 10.5.0.0/24 at rate limit of 256k upload and 1024k download so that 50 of users may get Equal bandwidth by PCQ.
hi all, I have setup mikrotik router os 3.20 on Dell Server running at 1130MHz Dual processor. My requirement is to run a DHCP server for the users of 1000. Is it a good idea ? If yes, can I use 10.0.0.0/22 for the DHCP service ? Please correct me if I am wrong with such huge number of customer serv...
Hi, I have a problem with MT OS when upgrade it from 2.9.51 to 3.x its simple queue stop working for users who are in the bridge interface ! all IPs in the simple queues got unlimited traffic and there are no traffic status available! Is there one who experience such problem ? I upgrade ot from 2.9....
hi everybody, i have setup wds mesh from wiki, but i need to know detail setup of wds mesh for AP running 2x R52H cards, 1 LAN and restriction by MAC those I allow to do WDS mesh only from other AP. I have Router OS 3.11 running on RB333. wiki have example with only one WLAN & LAN. Any suggestio...
I need to know how much power do I need for RB333 with 24 V DC POE ? I have 24 V 0.8A POE for 2 xr2 mpci cards & 1 CM-6 mpci card . Is this Amp ok ? Its 19.2 watt.
Mikrotik show a 28 dbm cards as 18 dbm as cards TX power value. They have -10 dbm difference for those high power cards like XR2, Engenious etc. When you login into MT winbox, you will see 28 (18) dbm TX power for XR2 cards that means your card is running at full power and mikrotik count it as 18 db...
Another question. For 3 KM radius WIFI service, how much TX power should I use in AP ? My tower is in 105 Feet from ground and my clients are 30-50 feet from ground in 3 KM radius.
ok fine. I asked you the question as I am not getting the good results with these two antenna which are running with 28 dbm of TX power ! Is th TX power too high ? I am planning to cover 3-4 KM radius only with 16 dbi sector antenna. Any suggestion?
i have two 120 deg sector antenna (made by pacific wireless,usa) gain 16 dbi in a tower with 2 x XR2 MT radio. My question is how much distance should I keep for the antenna's ? Its 3 feet now. Is it ok or have to make bit more distance ? any suggestion ?
hi everybody ! I am Litu writing this letter to you from Dhaka, Bangladesh. Actually I'm writing this one to get some vital help from you on establishing a WiFi Network in an Urban area. Following are the details of my proposed Network. a) The Area: 1.The place is called Uttara Model Town, which is ...
hi guys, I have a Ap with Athores 5213 (CM9) mini pci at desktop pc with Mirotik 2.9.50 (level-4) and 1 watt Hyperlink bi directional Amp with 15 dbi Hyperlink Omni Antenna running in 2.4 GHz with B/G mode. my problem is, MT is not supplying/generating DHCP ip to my wireless customers. Though the se...
i have 16 dbi parabolic dish & some 12 dbi grid antenna at clients site. Can you please tell me with 120 deg sector (14 dbi gain) at AP (rb532a, XR2) end, how much distance can I make a link with 16 dbi dish at cpe end? And how many clients I can register? though MT has limit of 2007 stations, y...
hi eveyone, i have just setup a AP with: RB532A (mikrotik 2.9.50) XR2 (600mW) Mini pci card and 14 dbi Vertical 120 deg Sector antenna at 105 feet height. Is there anyone who tested the XR2 cards performance with RB532 as AP ? I need to know the result having distance and throughput ! Please provide...
Hello, I need to know how can I implement Static IP route on the same interface where I am running hotspot & pppoe for my wireless customer already ? My customer can access hotspot page and use radius authentication & pppoe also with radius authentication. I want only some specific users can...
Thank you all for the suggestion. I think I have to clear you all what I want actually. As you know I am using a 802.11b AP with Mikrotik OS, its sending 11 Mbps TRansmission speed for all clients, right ? If my all CPE's connected with 11 Mbps, I think they may kill my wireless throughput as I am n...
My thought on the RB333 subject is that it is ONLY supported with the newest versions of ROS and thus might be more of a challange to LEARN with since some of your problems with setup MIGHT actually be ROS issues. I would suggest that you use hardware that is supported by ROS 2.9.46 that is much le...
I have got XR2 600 mw mini PCI cards from USA as a gift from my brotehr !
I need a Router Board planning to setup a WISP in my area. So I am planing to buy a RouterBoard for that. I saw RB333 is already in Market. Is it good ?
Dear All, I need to know how can mikrotik router os acting as AP that can deliver only 1 MBPS connections to all CPE's (not the 1/2/5/11 Mbps auto fall back !) ? Dpending on the signal quality, I saw CPE's are connecting with 1/2/5 or 11 MBPS on 802.11b mode. I want to restrict all CPEs to have only...
Hello every one, I want to setup ipsec between two mikrotik having one in DMZ host and one in pulic IP. My network is like this: router-1 lan: 202.122.126.0/24, wan: 203.112.204.228 router-2 wan: 10.0.0.200 (from ADSL (WAN: 195.137.31.55) Local LAN DMZ to mikrotik at IP: 10.0.0.200 How can I make IP...
Yes ! Its possible. Let me describe what you have to do. First enable web-proxy, define port:8080 (don't put src address!), hostname: proxy. Now click on the tranperent proxy, put parent proxy's ip address which is your external proxy, and also its port like 8080.Cache admin: webmaster as default, m...