Community discussions

MikroTik App

Search found 61 matches

by realtime
Tue Jan 26, 2021 9:47 pm
Forum: RouterOS beta
Topic: Will Mikrotik v7 support L2MTU for x86?
Replies: 4
Views: 2112

Re: Will Mikrotik v7 support L2MTU for x86?

On MPLS interfaces, MTU is by default 1508. The question is as follows. If you pass the VLAN through the physical link and raise MPLS on it, then problems begin with the passage of packets more than 1496 bytes. If you raise the MTU on the physical card to 1504, then 1500 bytes packets begin to pass ...
by realtime
Mon Jan 25, 2021 10:43 pm
Forum: RouterOS beta
Topic: Will Mikrotik v7 support L2MTU for x86?
Replies: 4
Views: 2112

Re: Will Mikrotik v7 support L2MTU for x86?

You're right.
But in this case, will we have to stop using VLAN or VPLS?
by realtime
Sat Jan 23, 2021 11:10 pm
Forum: RouterOS beta
Topic: Will Mikrotik v7 support L2MTU for x86?
Replies: 4
Views: 2112

Will Mikrotik v7 support L2MTU for x86?

Hi.
Will Mikrotik v7 support L2MTU for x86?
I have an Intel X710 DA-2 card to experiment with.
The card is determined by the OS and everything works. But for MPLS, you need to raise MTU. And if I understand correctly, if I do it manually, then there will actually be packet fragmentation.
Thank you.
by realtime
Mon Jun 29, 2020 7:52 pm
Forum: General
Topic: Mikrotik Telegram channel
Replies: 0
Views: 768

Mikrotik Telegram channel

Does Mikrotik have a telegram channel?
by realtime
Mon Jun 29, 2020 7:50 pm
Forum: General
Topic: x86 core/cpu limit?
Replies: 6
Views: 3404

Re: x86 core/cpu limit?

Someone answer me? :-(
hmm.JPG
by realtime
Thu Jun 25, 2020 3:09 am
Forum: General
Topic: ROS on A10 AX3400
Replies: 4
Views: 1616

Re: ROS on A10 AX3400

:( :(
by realtime
Wed Jun 24, 2020 1:18 am
Forum: General
Topic: x86 core/cpu limit?
Replies: 6
Views: 3404

Re: x86 core/cpu limit?

After the series of experiments, I found a problem. In the previous picture, this is a production server with system.npk and routing.npk packages. The server makes Firewall Filer / Nat / Mangle, Simple queues and BGP. And in this picture it’s just bentdwith test. It turns out that bandwith test can ...
by realtime
Tue Jun 23, 2020 12:42 am
Forum: General
Topic: ROS on A10 AX3400
Replies: 4
Views: 1616

Re: ROS on A10 AX3400

Yes exactly. It would be nice if favorite OS worked with ASIC for example - Broadcom Trident. Arista 7050 on this chip. And costs on ebay.com from 300 dollars.
by realtime
Sun Jun 21, 2020 8:10 pm
Forum: General
Topic: ROS on A10 AX3400
Replies: 4
Views: 1616

ROS on A10 AX3400

Hello to all.
Sitting at home is becoming more difficult, but a lot of time for experimentation :-)
Today I launched ROS from a flash drive on the AX3400.
Unfortunately, only the management port works.
mk-ax3400-2.jpg
mk-ax3400.png
by realtime
Wed Jun 17, 2020 11:39 pm
Forum: General
Topic: x86 core/cpu limit?
Replies: 6
Views: 3404

Re: x86 core/cpu limit?

Yes you are right. HT does not give much benefit and it is always off for me. At the moment, it is included for the experiment. I wanted to make sure that Mikrotik can not use more than 16 threads. The problem arose when I turned on Mikrotik on another server with a 2x E5-2680 v2 (10 core) processor...
by realtime
Wed Jun 17, 2020 2:56 pm
Forum: General
Topic: x86 core/cpu limit?
Replies: 6
Views: 3404

Re: x86 core/cpu limit?

mikr.png
by realtime
Tue Jun 16, 2020 6:47 pm
Forum: General
Topic: x86 core/cpu limit?
Replies: 6
Views: 3404

x86 core/cpu limit?

Hi!
Today I enabled Hyper Threading on the server, and was surprised that Mikrotik does not use all 32 threads.
Only 16 worked.
Server 2x 8 core E5-2680 2.70GHz.
I wanted to know if there is a limit on the number of cpu / threads in x86 or am I not doing something right?
by realtime
Sun Feb 23, 2020 3:14 pm
Forum: RouterOS beta
Topic: Feature request: Torch to new level in v7
Replies: 2
Views: 3522

Feature request: Torch to new level in v7

Hi Mikrotik team! I want to offer some new keys. I think that these parameters are necessary for a more flexible use of the Torch function. 1. NOT function for Src/Dst/Ipv4/6 .. 2. Group by ip Src/Dst 3. Group by port 4. Torch with many IPs like this --- 91.24.23.22,102.64.10.1 (separeted with comma...
by realtime
Sat Feb 22, 2020 12:22 am
Forum: RouterOS beta
Topic: Why to upgrade to V7?
Replies: 3
Views: 3641

Re: Why to upgrade to V7?

VXLAN
by realtime
Wed Feb 19, 2020 6:26 pm
Forum: RouterOS beta
Topic: RouterOS 7.0beta4 with Mellanox CX515A
Replies: 7
Views: 7970

Re: RouterOS 7.0beta4 with Mellanox CX515A

Hi thekrzos
test-both.png
.
Can you show the processor load as in the picture?

.
cpu=usage.png
by realtime
Sun Apr 22, 2018 5:51 am
Forum: General
Topic: Can I use INTEL X710-DA2/DA4 10Gbe LAN card on mikrotik x86 6.42?
Replies: 4
Views: 3158

Can I use INTEL X710-DA2/DA4 10Gbe LAN card on mikrotik x86 6.42?

Can I use INTEL X710-DA2/DA4 10Gbe LAN card on mikrotik x86 6.42?
like this card?
https://www.ebay.com/itm/OEM-NEW-one-X7 ... SwjDZYb6o3
by realtime
Wed Jan 31, 2018 8:51 pm
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 49487

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

Hi. Sory bad english. This day install wap60 link 1.1 km. Distance. Wap60 mount 45 cm parabolic dish antenna. My signal min. 75 maks. 85 but not connected. Status connect and notconnect connect and notconnect. What problem. ? Wap60 software distance limitation or ack timing problem ? 45cm dish is t...
by realtime
Tue Jan 30, 2018 11:17 pm
Forum: Wireless Networking
Topic: Very interesting solution for 60GHz
Replies: 0
Views: 800

Very interesting solution for 60GHz

GigaRay Evaluation and Development Kits
http://www.latticesemi.com/Products/Dev ... x?pr120417
by realtime
Fri Jun 30, 2017 11:01 am
Forum: General
Topic: When vlan interfaces is so much, after reboot there running not correctly on RB2011LS
Replies: 2
Views: 883

When vlan interfaces is so much, after reboot there running not correctly on RB2011LS

Hi there. I have created 500+ vlan interfaces on RB2011LS. After reboot vlan interfaces is running not correctly. I forcefully disabling all vlans, than enabling. After that they run normally. How may i resolve this problem.
by realtime
Sun Nov 08, 2015 8:58 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

I don't see any reason for it to be ROS 6.33 dependent. The SFP ONU handles the upstream ONU <> OLT protocols and upstream physical layer and then presents a layer 2 path to the RouterBoard so I would expect it to work with earlier ROS versions too. At the moment, I have no ONT module for experimen...
by realtime
Fri Nov 06, 2015 9:58 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

good news :)
in new 6.33 os mikrotik wants to support GPON - ONU with any routerboard with SFP port.
http://download2.mikrotik.com/news/news_68.pdf
by realtime
Thu Nov 05, 2015 9:40 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

And CWDM is better! :) but we tolk about RB2011 on atheros chip. AR8327 - compatible with PON. "The remaining 2 ports feature a standard GMII/RGMII/MII/Serdes interface to allow connection to a host CPU in PON/xDSL/Cable/Wifi/Fiber routers." https://wikidevi.com/files/Atheros/specsheets/AR...
by realtime
Thu Aug 27, 2015 1:16 am
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

Re: 10Gb VMXNET3 driver support request

The change is only for CHR http://forum.mikrotik.com/viewtopic.php?f=21&t=98981
Not for install from ISO
Dear Normis what about throughput over mikrotik in CHR in simple bridge mode or how many traffic can be NAT-ed in licensed CHR? For example creating server with one CPU and 2000 Mhz.
by realtime
Thu Aug 27, 2015 12:17 am
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

Re: 10Gb VMXNET3 driver support request

abc
by realtime
Fri Aug 21, 2015 11:38 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

I connected OLT SFP to mikrotik too :) And ONU to this SPF module but no fun happened.
Yes I understand that mikrotik can't work with this SFP module but this is very interesting :)
I think that soft must understand physical layer protocol lower then MAC layer
by realtime
Fri Aug 21, 2015 11:05 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

I bought OLT and ONU from this supplier OLT http://www.alibaba.com/product-detail/2-PON-Ports-and-GEPON-OLT_60006977246.html?spm=a2700.7724838.35.1.e6sAZf&s=p ONU like this - 4 port FE / or 1 port GE http://www.alibaba.com/product-detail/FTTH-Termination-4-port-onu-gepon_60242421936.html?spm=a27...
by realtime
Fri Aug 21, 2015 10:53 pm
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

Re: 10Gb VMXNET3 driver support request

Bandwith-test in RouterOS is not very efficient way on how to generate traffic. Anyway, you can configure RPS and assign CPUs directly to IRQ that is working with the interface to optimize for performance if you are not satisfied. I usually disable RPC. Tell me please how to set up a x86_64 mikroti...
by realtime
Wed Aug 19, 2015 9:00 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

it is sad :(
i like mikrotik interface and hope for similar products in future

on this moment for my test i bought 2 x port OLT and 30 ONU (made in china) works fine.
OLT ~ 500 USD
ONU - 25 USD
by realtime
Wed Aug 19, 2015 8:42 pm
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

Re: 10Gb VMXNET3 driver support request

Hallelujah! What's new in 6.31 (2015-Aug-14 15:42): ...... *) demo mode of Cloud Hosted Router (CHR) added *) chr - added x86_64 image for use in virtual environments *) chr - added support for VMware SCSI virtual disks *) chr - added support for VMware vmxnet3 network card *) chr - added support fo...
by realtime
Wed Mar 04, 2015 4:48 pm
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

Re: 10Gb VMXNET3 driver support request

Could you tell which 10 Gbit SFP+ physical adapter and which SFP+ module do you use ?
Broadcom NetXtreame II BCM57712
I don't use SPF module at moment. The servers connected directly with SFP+ DAC cable. Like this http://www.sfpex.com/image/cache/data/p ... 00x500.jpg
by realtime
Wed Mar 04, 2015 3:04 pm
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

Re: 10Gb VMXNET3 driver support request

Last test results. I got 5 GBit on the E1000 ethernet driver. Everything are shown on the pictures.
by realtime
Wed Feb 18, 2015 5:16 pm
Forum: General
Topic: Feature Request: IPerf
Replies: 70
Views: 24049

Re: Feature Request: IPerf

good idea! +1 too!
very useful tool, can test link quality with any other server
by realtime
Wed Feb 18, 2015 5:01 pm
Forum: General
Topic: WinBox Torch Requist
Replies: 5
Views: 2632

Re: WinBox Torch Requist

great idea! and :)
+ " ! " (not) like in firewall settings
+ add many networks like as queues Target (up/down arrows)
+ many port(S) 80,443,8080-10000
by realtime
Sat Feb 14, 2015 8:34 pm
Forum: General
Topic: 10Gb VMXNET3 driver support request
Replies: 14
Views: 8556

10Gb VMXNET3 driver support request

I need that mikrotik to support 10Gb VMWARE VMXNET3 driver. My network become bigger, I am using more mikrotik routers (SXT2.4-5, AC....), and the gatways for all them are 4pcs of CCR1036. CCR1036 cant NAT big trafic(700-800Mbps) properly. So I have HP server (2CPU-each 6core ) ESXi 5.5 installed wi...
by realtime
Sat Dec 27, 2014 5:38 pm
Forum: General
Topic: 6.23 - system health - is not working properly
Replies: 4
Views: 1633

Re: 6.23 - system health - is not working properly

Yes. 3.18 BOOT work propertly.
What do you think? Must I write to support about this for repairing in newer versions?
by realtime
Fri Dec 26, 2014 10:28 pm
Forum: Wireless Networking
Topic: Wireless Link Fine Tuning
Replies: 8
Views: 4879

Re: Wireless Link Fine Tuning

what theory about you are talking???? we have practice link 11km with real working throughput. i found a channel with 150Mhz free space, i try all setting that you are talking about TDMA=auto etc..... what about noise settings???? do you use it?? can anybody tell what is it doing? AC models did not ...
by realtime
Fri Dec 26, 2014 7:10 pm
Forum: Wireless Networking
Topic: Wireless Link Fine Tuning
Replies: 8
Views: 4879

Re: Wireless Link Fine Tuning

I have a link in distance - 11km, (RB-SXT-G-5HPnD r2 (1Gb port) with 1m dishes, signal str. 45/47 CCQ 99/100) with maximum bandwidth 210Mbit TCP. But the technology is going to be better and faster. And after read many advertisements of new AP super puper wireless who promise to give 560Mbit of band...
by realtime
Fri Dec 26, 2014 6:33 pm
Forum: General
Topic: 6.23 - system health - is not working properly
Replies: 4
Views: 1633

Re: 6.23 - system health - is not working properly

I forgot say you that input voltage is must show between 22-23V (our input adapter is 24V and 22m of FTP 25AWG cable)
by realtime
Fri Dec 26, 2014 6:16 pm
Forum: General
Topic: 6.23 - system health - is not working properly
Replies: 4
Views: 1633

6.23 - system health - is not working properly

Good day! after upgrading to 6.23 version system health is not working properly on many models.
But it work properly on new RB SXT - AC models

Please repair this
thanks
by realtime
Wed Oct 08, 2014 10:11 pm
Forum: Wireless Networking
Topic: Heterodyning in wireless networks?
Replies: 2
Views: 1529

Re: Heterodyning in wireless networks?

The problem in a radio magnetic field.
I also encountered this problem.
Change the location of your antennas or FM antennas :)
by realtime
Wed Oct 08, 2014 9:41 pm
Forum: Wireless Networking
Topic: wireless AC can't find Noise Floor Threshold
Replies: 9
Views: 5321

Re: wireless AC can't find Noise Floor Threshold

Dear friends My question is when "Noise Floor Threshold" parametr will be in future mikrotik packages. I need it because im useing in practice just now. That is very important parametr for useing in real air where work many other radios. I am also missing this feature on the AC products, a...
by realtime
Fri Oct 03, 2014 6:20 pm
Forum: Wireless Networking
Topic: wireless AC can't find Noise Floor Threshold
Replies: 9
Views: 5321

wireless AC can't find Noise Floor Threshold

Good Day
Can't find Noise Floor Threshold settings in new wireless AC (wireless-fp) package.
I need to increase or decrease the noise value, how I can do that?
How it will be? I have to change the noise value, because the noises in real air are to much :((
by realtime
Sat Oct 05, 2013 2:13 pm
Forum: General
Topic: VRF - How many interfaces can be under one VRF rule?
Replies: 2
Views: 1572

Re: VRF - How many interfaces can be under one VRF rule?

my experiment ...
So I create 500 vlans and then put it to one vrf rule
is this a right way to add so many vlans to the one rule or can be another method?
by realtime
Thu Oct 03, 2013 11:52 pm
Forum: General
Topic: VRF - How many interfaces can be under one VRF rule?
Replies: 1
Views: 874

Re: VRF - How many interfaces can be under one VRF rule?

my experiment ...
So I create 500 vlans and then put it to one vrf rule :)
is this a right way to add so many vlans to the one rule or there is another method?
by realtime
Wed Oct 02, 2013 10:02 am
Forum: General
Topic: VRF - How many interfaces can be under one VRF rule?
Replies: 2
Views: 1572

VRF - How many interfaces can be under one VRF rule?

Hello
How many interfaces can be under one VRF rule?
by realtime
Tue Oct 01, 2013 1:25 pm
Forum: General
Topic: VRF - How many interfaces can be under one VRF rule?
Replies: 1
Views: 874

VRF - How many interfaces can be under one VRF rule?

Hello to all!
VRF - How many interfaces can be under one VRF rule?
by realtime
Tue Oct 01, 2013 12:50 pm
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

As I see L3VPN problem solved in 6.5rc1.
I'll create a new post about problem with queues.
by realtime
Mon Sep 30, 2013 6:04 pm
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

Kreacher
Yes!
hope, wait and help each other!
http://www.youtube.com/watch?v=M97vR2V4vTs
Normis and all MikroTik team - THANK YOU!
by realtime
Mon Sep 30, 2013 4:18 pm
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

hello Normis! this is the copy of email Hello Maris. I have a bad news about queues in 6.4 package. One simple queue can downgrade system speed. I turned on only one simple queue in my CCR1036-12G-4S ros 6.4 two days ago. After that I recieved many cals from my clients about low speed. It was true. ...
by realtime
Mon Sep 30, 2013 1:46 am
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

Kreacher Yes, you are right. for tiles gx cpu mikrotik build only 6.x os. ... this is cpu features http://www.tilera.com/sites/default/files/productbriefs/TILE-Gx8036_PB033-02_web.pdf this is very good cpu, with 36cores and 12MB of total cache, 64bit arch. look to Networking Interfaces • Four 10 Gb...
by realtime
Tue Sep 24, 2013 4:39 pm
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

Hi Geeek

L3VPN network on version 5.26 works perfectly. check your configurations.
by realtime
Tue Sep 17, 2013 10:43 am
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

So dramatically with software?? ** MY Story about buying of CCR1036 For more stability and higher performance of our network we bought crc1036. But this one came with 6.x software. Now what can we do with this device??? We can’t use normaly not Queues not BGP + MPLS… only NAT and Firewall! ?? Even t...
by realtime
Mon Sep 16, 2013 11:52 pm
Forum: General
Topic: L3 MPLS VPN not working in 6.3, 6.4
Replies: 21
Views: 7962

Re: L3 MPLS VPN not working in 6.3, 6.4

Hi. I found the same problem with ros 6.x !
I get a problem when i running MPLS VPN setup. I think the problem is in the mpls package.
My post is http://forum.mikrotik.com/viewtopic.php?f=1&t=76804
by realtime
Mon Sep 16, 2013 7:45 pm
Forum: General
Topic: ros 6.4 MPLS local bindings problem
Replies: 1
Views: 2220

ros 6.4 MPLS local bindings problem

Dear developers. I get a problem when i running MPLS VPN setup When i'm comparing the MPLS local bindings section in 5.22 and 6.4 versions I found that 6.4 version can't automaticaly create local bindings. you can find it on attached picture. Please tell me if this is a bug of 6.4v or i do something...
by realtime
Thu Nov 08, 2012 10:46 am
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible

about terminology http://www.thefoa.org/tech/ref/appln/FTTH-PON.html I tried to understand differences between GPON and GEPON. I understood GEPON is more cost effective solution and throughput is 1Gbps. But GPON has 2.5Gbps/1.25Gbps. Yes. You are right. GPON give 1.25Gbps up/down for Data and 1.25Gb...
by realtime
Fri Nov 02, 2012 9:05 pm
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 101
Views: 75309

Re: SFP module

I'll prefere to use GEPON OLT SFP module. (I'm discussing here http://forum.mikrotik.com/viewtopic.php?f=3&t=66910 ) GEPON OLT has expensive price. Its true, that they have more performance can support more ONUs and may be they can supply more clients but the price is $$$$. But I don't need 500 ...
by realtime
Fri Nov 02, 2012 1:17 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible

Thank you for your attention.
But may be you don't understand my question fully?
This is SFP GPON ONT module - client side . and this is not GEPON (EPON) device - this is GPON (ITU-T G.984)

My question is OLT on mikrotik
by realtime
Fri Nov 02, 2012 12:11 am
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

Re: GEPON OLT with new mikrotik RB2011LS-IN - is it possible

Hi Lakis! I don't use PON type network just now. This idea became after than we decided to build a small network for village with 300 houses. We are thinking that we will have 100-150 clients maximum in this village. So we chose Passive Optical Network for this place. We want to use GEPON (IEEE 802....
by realtime
Wed Oct 31, 2012 11:33 pm
Forum: RouterBOARD hardware
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 84
Views: 71451

GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

Good day! I want do build a little network based on GEPON. Maximum clients per OLT - 64 ONU-s. I find RB2011LS-IN model with SFP module support. And I find many OLT SFP modules on alibaba.com like this model http://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText...
by realtime
Mon Oct 29, 2012 6:56 pm
Forum: General
Topic: GEPON OLT with new mikrotik RB2011LS-IN - is it possible?
Replies: 1
Views: 1059

GEPON OLT with new mikrotik RB2011LS-IN - is it possible?

Good day! I want do build a little network based on GEPON. Maximum clients per OLT - 64 ONU-s. I find RB2011LS-IN model with SFP module support. And I find many OLT SFP modules on alibaba.com like this model http://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText...