some news?

i've tryed on another 10 pc!! same result!!

i've tryed ssh and telnet (also mac telnet) with no success on about 10 pcs... no results!!

what can i do? tomorrow i'll try to use the com port to see what happens

How to resolve the problem in subject???

I've this issue on a 133c3 after a upgrade from 3.16 to 3.17. The unit can't associate anymore, it reply to ping and winbox..


Let me know how to resolve!

Thanks!
Francesco

me too!

i've seen on x86 and 133c, not yet on 433a. From 3.14 to 3.17 it's the same, 3.13 it's ok for me.

What you think about topic??

What better for CPE and what better for BS? I don't case about datasheet, i care about your experience with those cards.
If we share experience about we can avoid failure and bad buy!


Thanks!
Francesco

here interested too... daloia@mobida.it

Francesco

ehy?

up

This example is different, coz it makes persistent sessions and should work 100% of the time.

with load balance you haven't tryed to forward port?? if yes they work?

http://wiki.mikrotik.com/wiki/Load_Balancing_Persistent

it's what i've done... it works fon 95% of site.. for other i've to bind dst address to one gateway to preserve the session persistence.. for that point of view it's all ok

my problem now it's port forwarding

hi all! i have 2 internet conn (more coming) and 1 mt 532... i've done load balance like someone suggested on http://wiki.mikrotik.com/wiki/Load_Balancing my problem is that now i'm unable to bind some port to single ip (just to give some users highid on emule).. the previous rule don't work anymore...

i don't understand :( chain=prerouting in-interface=Local protocol=tcp dst-port=443 action=mark-connection new-connection-mark=even passthrough=yes that's a mangle rule.. so how i can forward port? i can't! i have to create a nat rule that handle the traffic and forward to my private ip.... but don'...

up

chain=prerouting in-interface=Local protocol=tcp dst-port=443 action=mark-connection new-connection-mark=even passthrough=yes for example i don't want to bind a port to a public ip... but to a private ip... just to redirect all traffic incoming port xxx to ip xxx.xxx.xxx.xxx... no matter what is th...

someone here?

hi all! i have 2 internet conn (more coming) and 1 mt 532... i've done load balance like you suggest on http://wiki.mikrotik.com/wiki/Load_Balancing and the 90% of the site that i've tryed works... but... but... 10% have still problem of session persistence :( why? Im works great, irc works great, d...

up

Hi... i have a mt that works very well except for 1 thing...i can't access any external ftp server that listen on port 21... it freeze on "Connected to x.x.x.x:21". If i try to connect to a server that listen on another port it connects but won't listen.. error "425 Can't open data c...

check on /ip firewall service ports

ftp enabled or disabled?

Regards,

now it's enabled, i've tryed also to disable it but the result don't change

pleace check that your FTP client is using passive connection settings

it doesn't mean anything if the client use passive mode or active... simple it don't work in both mode!

Hi... i have a mt that works very well except for 1 thing...i can't access any external ftp server that listen on port 21... it freeze on "Connected to x.x.x.x:21". If i try to connect to a server that listen on another port it connects but won't listen.. error "425 Can't open data co...