Community discussions

MikroTik App

Search found 14 matches

by wirelessadweb
Fri Jan 27, 2023 9:36 pm
Forum: Beginner Basics
Topic: Routing VLAN through Wireguard
Replies: 5
Views: 3906

Re: Routing VLAN through Wireguard

Have not tidied up yet the Wireguard provider I am using has a few issues with their UK servers, some web sites unavailabe. I will get on it thanks again.
by wirelessadweb
Fri Jan 27, 2023 7:22 pm
Forum: Beginner Basics
Topic: Routing VLAN through Wireguard
Replies: 5
Views: 3906

Re: Routing VLAN through Wireguard

Perfect thank you. Applied the detail and it works thank you - and increased my understanding. Very much appreciated.
by wirelessadweb
Fri Jan 27, 2023 1:23 pm
Forum: Beginner Basics
Topic: Routing VLAN through Wireguard
Replies: 5
Views: 3906

Routing VLAN through Wireguard

Hi, I am trying to complete a config with a VLAN being routed over a wireguard connection. In version 6 I set the mangle rules marked the routing and I could connect through a VPN. I am not getting the same results with 7, the Wireguard connection handshakes but I am not able to route the VLAN 20 ov...
by wirelessadweb
Tue Jan 03, 2023 6:43 pm
Forum: The Dude
Topic: Dude Telegram notification example
Replies: 64
Views: 145419

Re: Dude Telegram notification example

I realise this is a well established thread but I have read it a couple of times and can not see my issue highlighted. The Telegram message works well but I can not get the variables populated, I am, on 6.49.7, I am trying via Dude and in the terminal - they have the same results, it will send the m...
by wirelessadweb
Fri Jan 24, 2020 2:26 pm
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 291
Views: 421978

Re: Using RouterOS to VLAN your network

First off thank you for this posting pcunite I have adapted the RouterSwitchAP config to a RB4011 and it is easy to follow. I am trying to route one of the VLANs over a L2TP connection, I can get the connection L2TP connection up and route all traffic down it. But was hoping for advice on the best p...
by wirelessadweb
Thu Dec 19, 2019 7:01 am
Forum: Beginner Basics
Topic: 0.0.0.X address & DHCP
Replies: 2
Views: 1571

Re: 0.0.0.X address & DHCP

Hi thanks for the response the DHCP server was originally on the SFR (ISP box). I am sorry if my original post was not clear when I wrote I could see the MACs I meant I could see the MAC addresses listed and the IP addresses they had were of a 0.0.0.x not that the MAC address had that format. To see...
by wirelessadweb
Wed Dec 18, 2019 11:10 pm
Forum: Beginner Basics
Topic: 0.0.0.X address & DHCP
Replies: 2
Views: 1571

0.0.0.X address & DHCP

Hi, I am no expert but I use Mikrotik product for certain aspects for my client base. I have been using CRS328-24P-4S+RM to power Mikrotik APs and time and again Unifi depending on the application. I was registering APs to the Unifi controller and all seemed fine then I started to lose AP's when I l...
by wirelessadweb
Wed Jan 30, 2019 7:12 am
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM SFP
Replies: 4
Views: 2054

Re: CRS328-24P-4S+RM SFP

Thanks again I will keep that in mind
by wirelessadweb
Mon Jan 28, 2019 9:39 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM SFP
Replies: 4
Views: 2054

Re: CRS328-24P-4S+RM SFP

Hi

Thank you I missed the SFP"+" saw the compatibility was fine hence the confusion. Thank you for taking the time out to point me in the right direction.
by wirelessadweb
Sun Jan 27, 2019 2:07 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM SFP
Replies: 4
Views: 2054

CRS328-24P-4S+RM SFP

Hi Just installed a CRS328-24P-4S+RM and really pleased with its passive PoE and af/at support. In doing some testing though when I attach a SFP+DAC 1M there is no status on the SFP port I have also tried S-RJ01 and denada. I have a 206SP on the other end and it lights up fine. I scanned the forum a...
by wirelessadweb
Thu Aug 02, 2018 8:21 am
Forum: RouterBOARD hardware
Topic: LtAP problem
Replies: 8
Views: 6952

Re: LtAP problem

Hi I have the exact same problem LtAP mini. The device works well for about 10 minutes and then I have to reset the device, it comes back up but just repeats the process. I have more than one so I am setting up a 2nd now to test now. The symptoms are as if it just falls off the network, you can find...
by wirelessadweb
Tue Jan 08, 2013 9:33 am
Forum: Beginner Basics
Topic: Port Forwarding setup frusterations with Dynamic IP (Home)
Replies: 16
Views: 63983

Re: Port Forwarding setup frusterations with Dynamic IP (Hom

I did not need the hairpin I needed a sanity check, so I plugged in a router I know the Ubiquity and the same result - that is when it clicked check the camera and bingo.

Thanks for all the responses I will ensure I test the test environment before I post again.
by wirelessadweb
Mon Jan 07, 2013 4:46 pm
Forum: Beginner Basics
Topic: Port Forwarding setup frusterations with Dynamic IP (Home)
Replies: 16
Views: 63983

Re: Port Forwarding setup frusterations with Dynamic IP (Hom

Thanks for the post - I am testing from the outside this should be so simple. I have done this with other routers I am not that familliar with the Mikrotik but I have followed the instructions here to the letter working from a default config on a omnitik with OS 5.20 and a RB751u-2Hnd with 5.22. I c...
by wirelessadweb
Mon Jan 07, 2013 10:41 am
Forum: Beginner Basics
Topic: Port Forwarding setup frusterations with Dynamic IP (Home)
Replies: 16
Views: 63983

Re: Port Forwarding setup frusterations with Dynamic IP (Hom

Hi I am new to Mikrotik too and wasted Sunday trying to get basic port 80 forwarding to an internal address running. I have tried configuring from scratch and used a default config. Even tried two differnt versions of the OS I am looking top use webfig and forward 80 to a camera on the inside. I hav...