MikroTik

erasmo86

Good evening , I have a rb750 with pppoe server . I would make sure that customers pppoe in delay of payment have a warning when opening the browser , I would like that this notice is presented every 2 hours. I tried this : /ip firewall mangle add chain=prerouting connection-state=new src-address-li...

erasmo86

There are not solutions for this request?

erasmo86

no solution?

erasmo86

Good morning, it's a week I'm going crazy to operate the balance pcq with the priority of the packets, but I can not make it work. I would like to give priority to the http traffic but I can not make it work with pcq. There is an alternative way to set things up? For example, using queue tree?
thanks

erasmo86

I'm sorry, I solved the problem, I had reversed src-address with the dst-address, I wrote the rule correctly in the post but I was mistaken in mikrotik

erasmo86

You might try removing
Code: Select all
total-queue=default-small

I thought of that but it is not possible to remove that entry

erasmo86

Good evening, I created this configuration to have a balance between my clients: /queue type add name="PCQ_download" kind=pcq pcq-rate=15M pcq-classifier=dst-address add name="PCQ_upload" kind=pcq pcq-rate=512k pcq-classifier=src-address /queue simple add queue=PCQ_upload/PCQ_dow...

erasmo86

Thanks for the help, I'm using netwatch and seems to work. I would like to ask another information to avoid opening another post I've been monitoring the pppoe client using the graphing tool. The problem is that when the client disconnects and then reconnects I lose all graphs prior to disconnection...

erasmo86

Hello, I have this simple configuration. http://i44.tinypic.com/rigjms.jpg I have the need to constantly monitor the stability of the line dsl and I would like to receive an alert whenever the call drops dsl. The mikrotik is connected to the Internet via a modem/router. For the mikrotik the connecti...

erasmo86

I settled with the pre-routing, but now I do not work the filter rules.
I configured pppoe server in a mikrotik

erasmo86

thank you very much for your help There are several ways depending on how your clients connect. Lets take 1 example. You have a LAN of 192.168.88.2/24 and are hosting 5 web servers on it, 192.168.88.5-192.168.88.10 with public IP's of 1.1.1.1-1.1.1.5 say. Assume WAN is ether1 So for each server you ...

erasmo86

the problem is that I do not know if it fits the modem upstream.
My provider gives me authentication pppoa that the mikrotik does not support

erasmo86

Unfortunately, every client has a server with port 80 I can not change for business reasons

erasmo86

Hello, I can not solve a problem. My isp gives me 8 static public ip. I have this configuration, ISP--- rj11---->modem ---rj45--->eth1 mikrotik eth4-----> user I want my 5 client navigable each with a different public ip. Unfortunately I do not know how to configure the public ip in mikrotik. I woul...

erasmo86

I can not understand how to set up my network: my setup is / ip firewall nat chain=srcnat src-address=192.168.1.0/24 out-interface=WAN action=masquerade I want you all ip 192.168.1.x can access the nas via public ip:10000 Could you give an example of the rule to create? You can do this with dynamic ...

erasmo86

hello, thanks for the reply, I read the guide but I do not think face to the my case or at least not is what I understand . The client 1 has an ip 192.168.1.10 and has a nas on port 10000. If I put as remote public ip address:10000 everything works. Instead, The client 1 if he puts public ip: 10000 ...

erasmo86

Hello, I have a router mikrotik RB750. The WAN port is connected to my isp with static ip. I set up a pppoe server in mikrotik and my clients connect to mikrotik via pppoe authentication. So far everything works. my isp I assign a static IP. . the problem: Client 1 has a nas remotely. If you remotel...

erasmo86

Good evening I hope someone can help me .
I have a mikrotik RB750 with a pppoe server. I would make sure that when a client pppoe disconnects, part an email that warns the client pppoe which is disconnected. it is possible to do this?
Thank you very much for the help

erasmo86

there is a solution to the problem?

erasmo86

hello I have this configuration dsl-1 > 192.168.1.20 dsl-2 > 192.168.1.21 /ip address add address=192.168.1.1/24 disabled=no interface=LAN network=192.168.1.0 add address=192.168.10.2/24 disabled=no interface=WAN1 network=192.168.10.0 add address=192.168.11.2/24 disabled=no interface=WAN2 network=19...

erasmo86

Hello, I solved by creating rules with distance 2 n ip> route

erasmo86

hello to all I have this simple configuration http://i47.tinypic.com/fdrsbl.png dsl-1 > 192.168.1.20 dsl-2 > 192.168.1.21 dsl-3 > 192.168.1.22 dsl-4 > 192.168.1.23 /ip address add address=192.168.1.1/24 disabled=no interface=LAN network=192.168.1.0 add address=192.168.10.2/24 disabled=no interface=W...

erasmo86

my configuration is:

I want the PC1 and PC2 not share files, must be isolated.
For the mac address, I want the PC1 connects only via pppoe and not set an ip 10.0.0.x

erasmo86

At mikrotik are connected: 2 pc with pppoe 2 pc without pppoe I would make sure that the pc with pppoe is not possible to connect directly to mikrotik, you should only connect via pppoe. I ask you if there is a way to block a mac address to connect only as client pppoe I noticed that the 2 pc in ppp...

erasmo86

thanks, is interesting but unfortunately it is not what I'm looking for

edit:
I solved with PCQ, it was I who was wrong to set limits, thanks for the help, bye

erasmo86

I have tried both PCQ, limit at and max limit but does not work well, pobabilmente skip some steps, I followed the manual mikrotik.

Could you give an example of configuration?
Bye and thank you

erasmo86

I ask for your help because i do not know what else to try I found a problem that I thought I had solved, I have the mikrotik configured with a wan and a lan, ether 2 is wan and ether1 is lan. the wan gives me 10mega actual, I want my three clients lan have a maximum bandwidth of 7mega and a minimum...

erasmo86

I solved the fact of the nanobridge, I still have to understand a little something for example on ether1 with ip 10.0.0.1 are connected pppoe client with ip 172.16.0.x From these clients, if I put in the address bar of any browser the ip 10.0.0.1, I access to the interface of mikrotik, how can I sto...

erasmo86

Thank you very much, you are very competent. Unfortunately I do not have advanced knowledge of mikrotik and I did not understand how to make it. The administrator pc can connect it directly to mikrotik without pppoe if necessary. From this computer I must have access to the nanobridge that are conne...

erasmo86

hi, for log inform. you should define the remote log server for syslog in mikrotik....system--logging---actions--remote. remote:write there remote syslog server ip.(ex.dude in windows) in logging--rules : you should add firewall to remote..(topics:firewall,action :remote) in firewall filter:chain:f...

erasmo86

or torrents
erasmo86 sorry its like a personal data about costumers

Unfortunately the Italian law requires this.
It's called the law Pisanu

erasmo86

Thanks for your help

The Italian law wants to keep track of connections made by various customers for possible terrorism or pedophilia, in order to determine who has visited those sites.

The problem is that I can not store this information in my syslog server.

erasmo86

erasmo86

Hello, I am new to the world mikrotik and I'm slowly learning. I'm stuck at one point. I have configured two interfaces, one WAN and one LAN. I created a pppoe server and its clients. Everything works fine. Now I want to set a bandwidth ADSL limit for each PPPoE clients. I want every customer has a ...

Search found 34 matches

help for periodic payment reminder for pppoe client

Re: pcq and traffic priority, help

Re: pcq and traffic priority, help

pcq and traffic priority, help

Re: abnormal behavior pcq balance

Re: abnormal behavior pcq balance

abnormal behavior pcq balance

Re: Notice dsl line lost

Notice dsl line lost

Re: Help how to configure multiple public IP address on Mikr

Re: Help how to configure multiple public IP address on Mikr

Re: Help how to configure multiple public IP address on Mikr

Re: Help how to configure multiple public IP address on Mikr

Help how to configure multiple public IP address on Mikrotik

Re: problem with remote public ip with pppoe client

Re: problem with remote public ip with pppoe client

problem with remote public ip with pppoe client

e-mail alert when pppoe client disconnects

Re: please help me with problem resolution dns

please help me with problem resolution dns

Re: I ask for help to configure / ip route

I ask for help to configure / ip route

Re: Help block mac-address and pppoe isolation

Help block mac-address and pppoe isolation

Re: set minimum bandwidth and maximum bandwidth for the clie

Re: set minimum bandwidth and maximum bandwidth for the clie

set minimum bandwidth and maximum bandwidth for the client

Re: Help with limit bandwidth for pppoe client

Re: Help with limit bandwidth for pppoe client

Re: Help with limit bandwidth for pppoe client

Re: Help with limit bandwidth for pppoe client

Re: Help with limit bandwidth for pppoe client

Re: Help with limit bandwidth for pppoe client

Help with limit bandwidth for pppoe client