Good evening , I have a rb750 with pppoe server . I would make sure that customers pppoe in delay of payment have a warning when opening the browser , I would like that this notice is presented every 2 hours. I tried this : /ip firewall mangle add chain=prerouting connection-state=new src-address-li...
Good morning, it's a week I'm going crazy to operate the balance pcq with the priority of the packets, but I can not make it work. I would like to give priority to the http traffic but I can not make it work with pcq. There is an alternative way to set things up? For example, using queue tree?
thanks
I'm sorry, I solved the problem, I had reversed src-address with the dst-address, I wrote the rule correctly in the post but I was mistaken in mikrotik
Good evening, I created this configuration to have a balance between my clients: /queue type add name="PCQ_download" kind=pcq pcq-rate=15M pcq-classifier=dst-address add name="PCQ_upload" kind=pcq pcq-rate=512k pcq-classifier=src-address /queue simple add queue=PCQ_upload/PCQ_dow...
Thanks for the help, I'm using netwatch and seems to work. I would like to ask another information to avoid opening another post I've been monitoring the pppoe client using the graphing tool. The problem is that when the client disconnects and then reconnects I lose all graphs prior to disconnection...
Hello, I have this simple configuration. http://i44.tinypic.com/rigjms.jpg I have the need to constantly monitor the stability of the line dsl and I would like to receive an alert whenever the call drops dsl. The mikrotik is connected to the Internet via a modem/router. For the mikrotik the connecti...
thank you very much for your help There are several ways depending on how your clients connect. Lets take 1 example. You have a LAN of 192.168.88.2/24 and are hosting 5 web servers on it, 192.168.88.5-192.168.88.10 with public IP's of 1.1.1.1-1.1.1.5 say. Assume WAN is ether1 So for each server you ...
Hello, I can not solve a problem. My isp gives me 8 static public ip. I have this configuration, ISP--- rj11---->modem ---rj45--->eth1 mikrotik eth4-----> user I want my 5 client navigable each with a different public ip. Unfortunately I do not know how to configure the public ip in mikrotik. I woul...
I can not understand how to set up my network: my setup is / ip firewall nat chain=srcnat src-address=192.168.1.0/24 out-interface=WAN action=masquerade I want you all ip 192.168.1.x can access the nas via public ip:10000 Could you give an example of the rule to create? You can do this with dynamic ...
hello, thanks for the reply, I read the guide but I do not think face to the my case or at least not is what I understand . The client 1 has an ip 192.168.1.10 and has a nas on port 10000. If I put as remote public ip address:10000 everything works. Instead, The client 1 if he puts public ip: 10000 ...
Hello, I have a router mikrotik RB750. The WAN port is connected to my isp with static ip. I set up a pppoe server in mikrotik and my clients connect to mikrotik via pppoe authentication. So far everything works. my isp I assign a static IP. . the problem: Client 1 has a nas remotely. If you remotel...
Good evening I hope someone can help me .
I have a mikrotik RB750 with a pppoe server. I would make sure that when a client pppoe disconnects, part an email that warns the client pppoe which is disconnected. it is possible to do this?
Thank you very much for the help
At mikrotik are connected: 2 pc with pppoe 2 pc without pppoe I would make sure that the pc with pppoe is not possible to connect directly to mikrotik, you should only connect via pppoe. I ask you if there is a way to block a mac address to connect only as client pppoe I noticed that the 2 pc in ppp...
I ask for your help because i do not know what else to try I found a problem that I thought I had solved, I have the mikrotik configured with a wan and a lan, ether 2 is wan and ether1 is lan. the wan gives me 10mega actual, I want my three clients lan have a maximum bandwidth of 7mega and a minimum...
I solved the fact of the nanobridge, I still have to understand a little something for example on ether1 with ip 10.0.0.1 are connected pppoe client with ip 172.16.0.x From these clients, if I put in the address bar of any browser the ip 10.0.0.1, I access to the interface of mikrotik, how can I sto...
Thank you very much, you are very competent. Unfortunately I do not have advanced knowledge of mikrotik and I did not understand how to make it. The administrator pc can connect it directly to mikrotik without pppoe if necessary. From this computer I must have access to the nanobridge that are conne...
hi, for log inform. you should define the remote log server for syslog in mikrotik....system--logging---actions--remote. remote:write there remote syslog server ip.(ex.dude in windows) in logging--rules : you should add firewall to remote..(topics:firewall,action :remote) in firewall filter:chain:f...
The Italian law wants to keep track of connections made by various customers for possible terrorism or pedophilia, in order to determine who has visited those sites.
The problem is that I can not store this information in my syslog server.
Hello, I am new to the world mikrotik and I'm slowly learning. I'm stuck at one point. I have configured two interfaces, one WAN and one LAN. I created a pppoe server and its clients. Everything works fine. Now I want to set a bandwidth ADSL limit for each PPPoE clients. I want every customer has a ...