I've stripped out all mangling, I've removed the queues, still no change in performance. CPU utilization is now <4% and never goes any higher. New export: feb/13/2016 11:44:13 by RouterOS 6.32.4 # software id = IKL0-U4G5 # /interface bridge add name=LAN /interface ethernet set [ find default-name=et...
unfortunately for me, no windows in my configuration. The device doing the monitoring is a hardware device provided by the US FCC. The other computers are IOS or Mac OS X, I've tested over ethernet and via the wifi hotspots (RB951s) plugged into. I'm not expecting 250MB, but I'd like at least 150 or...
I have had some performance issues that have come to light and trying to figure out what has happened. My cable modem has been upgraded recently to a 300MB/20MB, and this brought the issue to light as when I wasn't seeing anywhere close to the DL speed I started testing. Right now, I'm getting rough...
/queue simple add burst-limit=5M/30M burst-threshold=1M/10M burst-time=5s/30s disabled=yes \ max-limit=1M/10M name=pcq-queue queue=\ pcq-upload-default/pcq-download-default target=192.168.88.0/24 \ total-queue=default I deleted everything, and went to the very most simple design I could. the above i...
I have the following simple queue using PCQ defined on my Routerboard 2011. /queue simple add burst-limit=5M/30M burst-threshold=1M/10M burst-time=5s/30s max-limit=1M/10M name=pcq-queue queue=pcq-upload-default/pcq-download-default target=192.168.88.0/24 total-queue=default the WAN link in theory is...
I have an RB2011 hardwired to a cable modem. the modem has 30MB Down/5MB Up performance. i have a 751U-2HND wifi connected to it, it's a simple AP in bridge mode providing wifi. I created an elaborate configuration using the 'mother of all qos trees' example off the web (https://www.mikrotik-routero...
<OT>You should complain anyway, what serious ISP gives just one lousy /64 to customers?</OT> I get the /64 from TWC. I followed the instructions here: https://major.io/2014/09/11/howto-time-warner-cable-ipv6/ to enable it 18,446,744,073,709,551,616 IPv6 addresses are in a /64, why do I want more th...
I have 1xRB493G and 3x912UAG-2HPnD providing Wireless to the site. My RB493G is my firewall/switch that everything is connected to. My ethernet WAN connection gets it's IPv4 and IPv6 via DHCP/DHCPv6 I get a /64 from the ISP. I'm trying to figure out how that is distributed. All of my Mac OS X and Wi...
Hi - I have multiple Mikrotik devices. One is a 493G and then three 912UAG-2HPnD All of them with 6.31 running on them think that when I 'check for updates' that 6.31 is new and offer to download and install. This breaks my package script that checks to do the auto-update method The script is: /syst...
Ugh. really? This doesn't work? I just bought this in a pre-bundled solution from a vendor. This isn't supported? someone should really document that as it isn't set anywhere. Just got the first one running. Bought it from this vendor: http://www.ispsupplies.com/MikroTik-Dual-Band-Indoor-802-11ac-Ac...
Ah. I figured out. The Auto-Config was adding some parameters that I wasn't using, and that seemed to cause it. Once I got on via MAC I was able to turn that off and it grabs an address like expected.
Hi - I have a new RB912UAG-2HPnD that I'm attempting to setup. I plug it into my laptop, run Quickset and define the WiFi and the ethernetport as an automatic via Ether1 only for IP address. WISP. I apply it, unplug it, plug it into data line and my 433G repeatedly fills the log with 'dhcp1 offering...
Hi - I picked up a new CCR 24 port 5125 and would like to figure out an easier way to change things. I'd like to rename all the ethernet ports, and de-slave them from the default. I'm having trouble grasping how to do this without accidentally disconnecting/shutting down my network connection while ...
I'm attempting to enable a transparent proxy on my RB493G on Mikrotik 6.27 software. The Routerboard 493G sees the MicroSD. I can format it ext3 just fine. Where I get stuck from the instructions I find, is I can't find the 'store' menu, and if I skip this step my proxy doesn't seem to be able to us...
I'm attempting to set up a router level VPN connection to an L2TP/IPSEC solution. The service is from IVPN, and they offer L2TP / IPSEC connection. It works fine if I use the built in VPN client on my host. I have the certificate, key, and it's loaded. I enable L2TP and it connects, I see a remote p...
I looked at the Wiki and found this page: http://wiki.mikrotik.com/wiki/Voip At the very end of the page is a sample configuration that does what I want to do. I understand that I have no control once it leaves my router, but my issue right now is occasionally something will 'upload' to the internet...
I'm using one of these for the first time, and have it installed. I've been using non-wireless RB433G for a while and it is running 6.14 (or whatever the latest RouterOS is) When I went to make sure my 751U-2HnD was up to date, i noticed it is on 5.26 from the factory. When I updated it, it said the...
Currently I have a RB433G acting as my internet router for the house, and I have two Apple AEBS in Bridge mode off them providing the Wifi connectivity on each floor. On these apple devices, if I just set the name the same, they flow between them as you transition floors. I'm helping someone without...
How do I ensure I have the card in right/it's enabled? I purchased a SanDisk 32GB UDHC MicroSD card (http://www.sandisk.com/products/memory-cards/microsd/ultra-class10-with-adapter/?capacity=32GB) I installed it, I think. It was seen in 5.23, but it wouldn't format. So I thought update to the latest...
I am probably not searching for the right term in the wiki, and I can't find if someone has a good suggestion for what to do. I have a RouterOS setup with a WAN and LAN port, i have a basic NAT + Filtering setup based off of the many suggestions in the wiki. I'm doing the srcnat = masquerade and the...
Ok. So prior to now I didn't have a product that would let me reliably use IPV6. I got a new 493G RouterBoard and have been setting up my Hurricane Electric tunnel. Running RouterOS 5.23 I've got IPV6 working, I can ping and view ipv6.google.com and v6.facebook.com and other sites, but if I run test...
I'm learning my way through RouterOS and have been unable to get a dhcp address on my wan port. I can plug the same cord into computer, and it gets an address from my dsl modem, but plug it into ether 1 and no address. At the moment I only have two things set. Ether1 is set to name public, and I hav...
So I'm experimenting with my new 493G board and discovered the null modem cable I have doesn't happen to be in my office today. I was setting things up and made a mistake, and now can't hit the eth1 192.168.88.1 address to fix my stupidity. The quick start mentions a reset jumper but it's not labele...