hi, now i have another problem. main RB with internet(10.11.10.250) is connected trough wireless link to another point where also VPN server is started (10.11.19.250) on this point are like 10 VPN clients and all have the same problem...the example client on the picture is 10.11.19.76 10.11.10.250 -...

thank you all for the replay i have tryd everything but didn't solve it so i just connect to the main RB and waiting for someone to come around and to see where is the problem.

point1 to point3 it's wireless link with 300mbps TCP speed and little more like 330mbps TCP and UDP is like 400-500Mbps. Client that connects to Point3 where Point3 is connected via VPN to Point2 wich is connected via VPN to point1 get's only like 60Mbps, but if the same client connect VPN to Point1...

i have 200/200mbps internet and the upload and download are the same 60/65 or 70/70.

try'd to set encryption NO and now i get like 90/90 but still no 200

hi to ya all.. i have a little problem with vpn speed. on my mikrotik rb3011(point1) i have set-up a 200mbps internet conection and a running PPTP server (i dont have pppoe because i can't run it on my other points because i share my network with my buddies) point1 <wireless 400mbps link> point2 <wi...

i just don't understand how you do this..i have the exact same config as you describe and i have try'd with alot other antenas and change my rb433ah with c2d PC's and still nothing..

can you post your config again??

tnx
bye

but this is utp traffic...

can you send a picture of tcp troughput??

tnx
bye

Here is the homework for wireless. Link is at 2km, using rb800 and sparklan wpea-110n and our config posted on this forum. Link is stable using 2 chains under v4.5 ... UDP test at 200.1M ... Real internet traffic achieved is between 180 and 190M downloading from rapidshare... Check picture: mikroti...

witch config do you use??

I tested today the "Exe-Config. 2 x RB411AH, 2 x R52hN, 2 x Mars 24,5 db Dual Polarity, Distance 25 km, LoS, very noisy enviroment, bridge mode, Btest over both RB411AH, Antenna on one side "off beam" due to lack of "second" man. I think it will bring 6 db more, if the ante...

May I ask your antenna configuration? Spacings and such We got a guy that does our dual polarity feeders. Still testing configs but we are satisfied with a certain design that we are going to run a few batches. We tested those with 80 and 100cm sat dishes. I guess a dual polarity Pac can do the job...

ok, exe ! you are right ! this was the valve to speed the link to that what it can do ... i can do a tcp-test with 65MBit/25MBit via the whole config (lan-wlan-wlan-lan) and have pings with 1-3ms i can copy files nearly as fast as on LAN ! i can run tcp-BT and file copy parallel and have 82MBit/30M...

Try to use quotation marks "busy" :foreach i in=[/ip dhcp-server lease find status="busy"]\ do={ :log error ("Busy status detected: " . [/ip dhcp-server lease get $i address]); /ip dhcp-server lease disable $i; /ip dhcp-server lease enable $i; } or simply like I do :fo...

Hi! Revome 1ª line "/ip dhcp-server lease;" . :foreach i in=[/ip dhcp-server lease find status=busy]\ do={ :log error ("Busy status detected: " . [/ip dhcp-server lease get $i address]); /ip dhcp-server lease disable $i; /ip dhcp-server lease enable $i; } is this right?? i have ...

can somebody help me to fix this problem??

tnx
bye

marek001 - Well marek001 - you have not supplied enough information for anyone to help you.... Here - and now i have set the ip-range for vpn and i have a ip range for my local area... Lan and wlan - Nod1 - 192.168.10.0/24 and Nod2 - 192.168.11.0/24 vpn ip - 170.0.51.0/24 You talk about 192.x... an...

Hi i have set up a vpn server...and there i'm sharing a internet connection.... and now i have set the ip-range for vpn and i have a ip range for my local area... Lan and wlan - Nod1 - 192.168.10.0/24 and Nod2 - 192.168.11.0/24 vpn ip - 170.0.51.0/24 i have figured out how to masqurade the vpn ip t...

Hi i have set up a vpn server...and there i'm sharing a internet connection.... and now i have set the ip-range for vpn and i have a ip range for my local area... Lan and wlan - Nod1 - 192.168.10.0/24 and Nod2 - 192.168.11.0/24 vpn ip - 170.0.51.0/24 i have figured out how to masqurade the vpn ip th...

Use hotspot feature.. It works for me. I have setup a Radius server that handles known (good mac's) and logs them in automaticly throgh the hotspot server and everybody unknown get's the login page... Regards /Henrik ok tnx 4 replay..but i have now figured out why i have this problems... some probl...

The high site have two sectors and no internet connection.The high site is being used to act as a local network connection in our town,where you can download software ect.,but the guy is using the high site and bring the every ones download speed down.If we kick him the average connection speed of ...

Hi,

i want to do a /interface wireless scan wlan1
for a few time and then store,save,.. or someting the results
to work with them

many thanks

hi

do you have somehow find out howto save this to a txt file??

by

i'm some kind a noob and i don't now how to set it with the line's but trough winbox

just set ever card to rip and that's all....

ok i solved the problem... the problem whas that on 3.200 i havent set the bridge into rip and so i havent got any routes from the other network's.. i have try this the first time and it don't work...the routs don't want do update... but today i have try and finnaly it work't ...why? i don't now but...

hi i have some problem with my routers example.: 192.168.3.200 ->switch ->192.168.3.150 -> wlan link and routing is set(rip) -->192.168.9.150 and now i cant ping or connect to 192.168.3.200 but all clients that are connected to 3.200 can download/upload...to 9.150 and 9.150 >3.150 is work ok downloa...

hi

can somebody tell me if it is posible to show all connected clients that have connection trough wireless on some sql or php database??

i have a local wifi network,and i want to show on my local web page how is right now connected to wireless and how not...

tnx
by

but if i set nat i will then only convert the rang 192.168.0.1-255 to 192.168.1.1-255,and i wanna lose this becouse i don't have any room for 1.1-255 or i missunderstud this?? or i can just convert the single card/wlan1 that is in wds with the another wds and not the hole network?? like 192.168.1.1 ...

ok i will try then....


thnx
by

sorry i have gave you the wrong configuration...
sorry


i'm not using a backbone,i use a wds mode....
is it posible to add to wds a gateway??

thnx for the info but can you little simple becuose i'm a little bit a newby
or even better how to add nat trough winbox


thnx

hy

i have 3 wireless netwrok's,and i like to set the ip range on every network diferent,like:

wlan1 - 192.168.0.0-255
wlan2 - 192.168.1.0-255
wlan3 - 192.168.2.0-255

is i'd possible to route all 3 network like this but not on dhcp??
they all are connected trough a backbone link...


thnx
by

i have now try to configure the mikrotik, like 1 mounth and nothing.... my problem is that i just can get my d-link dwl-g520 (Atheros AR5213) to work more then 2 MB and i don't now why.. i try to change: my computer (i used amd 3.0 with 1 GB ram) my antena (homemade biquad,orginal antena) my cable,a...