in the documentation : https://help.mikrotik.com/docs/display/ROS/Health there is a note : *NOTE: the default value may vary based on FAN controller chip and/or specific model requirements. From RouterOS verson 7.14 default value is set to 12, all previous versions have 0. I've changed to 0. It's ok...

Fan Issue Post-Update 7.14 on Microtique Hi everyone, I've recently encountered an issue with my Mikrotik CCR2004-16G-2S+ since the last update to version 7.14.1. Prior to this update, the fans would operate intermittently, which seemed normal and efficient. However, after updating, I've noticed tha...

Hi, it was a network encapsulation problem on the wireguard tunnel on mikrotik. First of all, I am not a network specialist. For my troubleshooting, I did a tcpdump on my server, router, and laptop with a successful test and a failed test. I compared the results. I saw a strange thing on some lines ...

I have the same issue with netflix.com, the common point is the number of lines that is returned in the "mtr" command (my trace route) which is more than 20 lines
is it a hop limitation ?

Hello, I have a behavior that I do not understand of my router. All of site work fine except for some websites. for example duckduckgo.com(52.142.124.215) is inaccessible via my router. I tested without going through this router, that is to say that I connect directly with my laptop on the cable and...

thanks so much

Sorry, I wasn't clear in my question. I understand what you said and I thank you for it. My question was simply about scripting. I don't understand where the value of the "$bound" variable in line 3 of the code comes from. if (\$bound=1) Script=":local route [/ip route find comment=\&...

a last thing, Script=":local route [/ip route find comment=\"wgserver\"]\r\ \n:if (\$bound=1) do={\r\ \n /ip route set \$route gateway=\$\"gateway-address\" disabled=no\r\ \n} else={\r\ \n /ip route set \$route disabled=yes\r\ \n}" in line 2 : the variable subsitution f...

Yippee, it works. But right after your settings, nothing happens. I restarted the router and it works like a charm.

remark : I have to delete the existing dhcp client. and recreate with your script.
Maybe you can explain me the script of dhcp to modify the routes?

Thanks

Hi, Thank you for your quick answers. I'm already tested the vpn with my laptop(linux). It's work fine. ps: I'm sorry, I'm not a network specialist. I am learning My topology is simple and I would like my router to be a vpn box VPNProvider -> tunnel(wireguard) through internet -> Mikrotik(vpn client...

Hello, Since this morning, I tried to configure my old rb951G with wireguard to route all traffic through the vpn. First, I did a complete reset, and updated my router to version 7.1(stable). The configuration file from my provider [Interface] PrivateKey = Privxxxxxxxxxxxxxx Address = 192.168.140.2/...

Hi all, My RB2011 has been bricked and I lost my configuration after upgrading from 6.39 to 6.39.1. and more netinstall could not see the router. I had to use my serial cable,change the boot option to boot on ethernet and finally upgrade via netinstall. All these steps succeed to get back my rb2011 ...

Hi, I’m newbie in ipV6. I have some difficulties to understand how to configure an ipV6 on my AP. I have router (RB2011UAS-2HnD) in IPV6 I manually configured the ip address V6 and all is ok (route, internet connection, host can connect via IPV6 autoconfiguration ). I bridged my ap(wifi with ether2-...

My Version for working with EuroDns, AsiaDns.... On WebSite(Eurodns.com) , signin, -> Control Panel->Domain Portfolio-> Manage Zone Setting/adding record A or AAA -> Dynamic =active https://www.eurodns.com/products/plugins/documentation/ http://sourceforge.net/apps/trac/ddclient/wiki/Usage RouterBoa...

Thanks.

Hi I try to use "Packet Sniffer" via Winbox or command line. The tool seems capture no packet. I try to reboot my Rb2011 but nothing change. [lli@MikroTik] > tool sniffer [lli@MikroTik] /tool sniffer> start [lli@MikroTik] /tool sniffer> stop [lli@MikroTik] /tool sniffer> /tool sniffer pack...

Hi How to change the defaults dns provided per the dhcp-client and it replace /override/force it by 8.8.8.(ie)? I have a lot of difficulties to find the answers on forum and help. Thanks a lot [admin@MikroTik] /ip dhcp-client> print detail Flags: X - disabled, I - invalid 0 ;;; default configuration...

Hi I encountered some difficulties to configure IpV6 with Hurricane(tunnelbroker). I’m newbie so I apologize in advance for my poor questions. I’m tried to configure my local network with ipv6 and ipv4 (dual stack). Ipv4 Work perfectly. Ipv6: something is wrong in my configuration because I can’t pi...

Hi,
similar issue with rb2011 in tcp with the default configuration(with the 3 default rules, firewall).


thanks

Hi, I bought a new router last week. On the Impressive possibilities, it's fantastic routing, monitoring, pool dhcp vlan, queing, firewall.. but performance, these results are not forthcoming (file transfer between desktop, streaming in video HD…). So I need you to understand if it’s normal. I make ...