MikroTik

marko_bg

comand are

/tool fetch url="http://..............................................." mode=http

btw, this work on v5.x

edit: also cannot wright (?) in terminal , becouse shift+? are HELP Menu

marko_bg

i try to used question mark (?) , in link

i send http request from MT to some web service

http://ip_address/control.cgi?bitrate....

and MT deleting this (?) . and i have answare 404 not find ... becouse link are
http://ip_address/control.cgibitrate....

version 6.6

what can be problm ?

marko_bg

i do this .. and then i have wrong user and pass ?

btw, i did not change user and pass

uf i used user: admin, without pass, i get in but all data gone , like new dud installation ?!

any soluiton for this ?

marko_bg

i have install new dude on diferent PC i have old dude folder, on old PC i do not export dude , and now can i make backup from old folder to new dude install ? btw, i also resintall dude on old PC , becouse dude cna not login locali ?! but i have old folder backup to another location any chance to s...

marko_bg

What's new in 5.17 (2012-May-28 12:34): *) files - fixed problem when directories disappeared after reboot on usb or sd flash; *) webfig - make QuickSet scan list work in Firefox v12; *) webfig - fixed problem in QuickSet when changing country or channel-width in AP mode would enable NV2 protocol; *...

marko_bg

webfig skins are not a security feature - it allows to tailor user interface to fit the user. it is still possible to access hidden pages.

i can not access to hiden pages ... why ?

marko_bg

hey ... i create new gropu, and remove some menu with design skin ... when i add this group to new user ... this user can load direct link to 'removed/hiden' menu option but, when i add this group to admin user ... then admin can not load direct link to hiden menu option ?! can some one comfirm this...

marko_bg

btw, mikrotik team ... you can make this ... - status page to see by default (empty) - user try to load direct link to Wireless - webfig go to skin file, to see what are seting for wireless menu - if wireless enable , open page normal - if wireless disable do redirect on status page , or block with ...

marko_bg

about security feastures 1. do you plan to make webfig to have partial or full security for diferent type of users ? 2. i try to block direct link in firewall on input chain ... in IE some link can be block ... but, in firefox, not i can see that traffic are cript ... you probably what to hiden code...

marko_bg

read mail, i send yesterday, autosupout, and manual supout to support still now answare ... to day i see new v5.8 ... *) pcq - fixed possible crash; i install v5.8 , and reboot, and RB work 10-20 minut ... then i do FW ugrade over winbox and now i can not enter to router , and i have ping 200 whn pi...

marko_bg

i was have kernel fauler , and router reboot, with v5.7 FW .36 i update to day to v5.8 and FW .37 i now i can not open router router work, ther is traffic, becouse behaind this router i have more router ... but i think this problema are RADIUS and CPU go to 100% i have ping 200 to router btw, RB493A...

marko_bg

i have problem with rapidly disconect of modesm, when used 4 modesm on hub. when only ppp-out connect on one modem, (but 4 modems in hub) .. work ok with two modem also, work, but not evry time. but with 4 modems .. everothing go wrong ... repidly disconenct all time, on every 2-30 secund. btw, I se...

marko_bg

did you have problems, with modem rapidly disconect, when used 4 modems ?

and mikrotik stop working, then i need to reboot

edit:
btw, witch hub you used ?

marko_bg

martinrochefort,

i do same , but do not have fix IP on 3G modems, then i used VPN (pptp) ...

bound interface work, both eoip, both pptp, ... but only one 3Gmodem

how you make traffic used more then one modems ?

do you used mangle, ddifferent routing tables ... ?

thanks

marko_bg

can I read prefiks from ripe.net database, and then make rules, from this info ?

with some sheduler rules, and script ?

any idea ?

marko_bg

I try L2TP and PPTP, and I have RX_ERROR on client ? all work till I enable bounding on 2 link (one wifi and ether over bullet) we test link, and we have about 100Mbps (have not problem with bendwith) when I disable one link (bound work trought another), VPN work fine . I user RB750 but, another cli...

marko_bg

mikrotik must disable auto show full adver...

must put some filter, like in IP Routes

btw, winbox in 3.24, work worse!

if enable/disable routing filter rules, winbox can not show change, I must close/open winbox to see change.

marko_bg

this can't be done with one router !

solution:
http://www.youtube.com/watch?v=kCVMkMym9MY

marko_bg

btw, v3.23

winbox , work worse on routing-test package

if I try change some rules, cpu go to 50%, and need much more time, 30-40 sec

with standar package go to 50%, but end job in 5-10 sec.

3 peer, 3 full table. about 900k prefix/routes

marko_bg

of topic:

sioannou,
can you look this:
http://forum.mikrotik.com/viewtopic.php ... 96#p155696

thanks

marko_bg

I need to setup upload and download for my prefix. example: x.x.x.x/20 - upload/download through peer1 y.y.y.y/24 - upload/download through peer2 (of course, when peer1 go down, traffic must go through peer2) I make routing filter for download (filter-out), this work. but filter-in not work, like I ...

marko_bg

"filter-out" have my prefix , but this is for incoming traffic (download), and this work. (this is for other AS in the world, to grade my prefix, through peer1 or peer2) but, when I put my prefix in filter-in , rules dont work, like is not there (maybe bug) ? btw, prefix in filter-in , did...

marko_bg

new post:

I need this:

upload from prefix x.x.x.x/20 go to peer1
upload from prefix y.y.y.y/24 go to peer2

is this can make with mikrotik ?!

marko_bg

CPU = C2D i7400 2,8Ghz RAM = 2GB 1066mhz DC (2x1GB) when take full table from one peer, CPU go to 17% , (can see over telnet) (if i have open winbox, winbox block ) for take full table 300k routes time are about 15 sec. when peer go down, and MT start deleting routes 300k , CPU go to 50% , and delet...

marko_bg

first i upgrade to 3.23 on router with cm9, but, on other side was router MT , with 3.22 UBNT card, and RX on cm9, was drop to 36mb, and not move. I downgrade to 3.22 , and RX stiil are bad to bad edit: then I upgrade other side , and then other UBNT for another link, in second router, drop to 36Mbp...

marko_bg

can do this with ippool ...

10 AP , each have one pppoe server,
each need 4 different pool,
total = 40 pools ?

marko_bg

1. syslog setting are disappear.

2. can not import file in beep, for sound

marko_bg

Prizm card not work !

marko_bg

router with 5 connections, freeze too.

to all MT users: Can anyone who have not this problems , tell us what use for setting.

Is there any one who have radius and MT , and do not have problems ?!

marko_bg

chapex,
do you have pool in Remote Address (pppoe seting in mikrtik),
or used redius attributs for poolname ?

marko_bg

@ omidkosair,

is there resolved problem in 3.17 ?

marko_bg

radius send attribut for this , ...
what if you have 5 pool, for 5 diferent groups , etc...

this work in 2.9.x, with no problems !

marko_bg

problem is in Profile Remote Address seting in PPPoE, when this are empty, mikrotik have some bug with make interface.

sergejs, test this, and tell us what you think

marko_bg

omidkosari,

did you test only cable customer ...

maybe problem are only on wifi card (accesspoint), not on ethernet card.

can you test this ?

btw, you see this problem for some users, is this users wireless or cable user ?

marko_bg

omidkosari, we can not testing anymore, because we do downgrade to 2.9.51, on all routers.... but I look something and maybe this can help ... users ap router "TP-Link", passtrought MAC from comp to mikrotik AP, and MT this MAC see like unkown_device ... and this have happend on 2-3 sec , ...

marko_bg

omidkosari, did mt-team, try something with your router ? did you used pool name in pppoe sever seting? because, we have pool , but blank seting for pool name, and attribut send pppoe in package, and mt find pool in pool list, maybe this is problem in v3 , for some connections ? btw, sergej, what ha...

marko_bg

is there any change in 3.16 ?

marko_bg

sergej,

PPPoE not work stable in v3, I can not used v3, and this features...

what happend if I make this (image) ?

marko_bg

How to change queuetype for dinamic simplequeue rules ?!

I want to used pcq_uplod and pcq_download, insted default-small.

marko_bg

how to change default "queue type", to be one that I choose ...

I think when make new rule to be default

marko_bg

core 2, core 4, core 5000 ...
what about mikrotik RB433, mikrotik BR600, mikrotik RB 44444 ... etc...

that's is not solution of problem.

marko_bg

I talk with MTsupport already 2-3 month, but they do not see any problems , :( We have exactly same problems ! we have about 30 v2.9.x in network with pppoe, and work without any problems over 2-3 years, and we have 2 v3.x with pppoe , and from all version of v3.x (we start with 3.6) problem are sam...

marko_bg

I need script , to move dinamic pppoe simplequeue to No.3 in SQ table, but only for user with IP 172.20.xxx.xxx (172.20.0.0/16) script can find interface with network 172.20.xxx.xxx, and used name of this interface to find SQ rules and move to No.3 have someone solution for this ? I give licence lev...

marko_bg

when do Restore in v3.11 I recived error "no file name"

clear install , and do backup, and do restore ... and mt can't do restore ?!

I do same with backup file from other mt router , it is same error ?!

marko_bg

how to make user how can change only wireless seting over winbox ... add/remove mac address,
and PPP , remove interface ?

maybe with radius or with The Dude ?

marko_bg

does the version 3.x requests any new MIB ?

can anybody confirm this ?!

is the old MIB are same in 2.9 vs 3.x ?

marko_bg

I known,

but I think maybe some MT users have some idea for this.

marko_bg

I wish to block only possible virus , ddos, etc... and i make rule: all !0-1500 drop ... and router is droping this packages, on pic2. I wonder, is I block normal traffic to users ? because , I do not wish to block normal traffic. MT support tell me: You can block ICMP >1500 for sure, but don't reco...

marko_bg

is it safe to block this packages with >1500 len , but with no effect on normal used of internet ?

marko_bg

first i see traffic from 1 users (i think it is virus) to internet , and this are ICMP (upload) len 64020, (pic1) , he reinstall OS, and this traffic is gone. than I block packages over 1500, after that, I see package over 1500 in log on 3-4 routers, and this are UDP (i think p2p) , from 1600-5000 l...

marko_bg

i make rules for !0-1500 log and drop, but rules log and drop 1498 , 1486 ?!

is this bug ?

v3.6

marko_bg

first, I find icmp packet len 64020 (6,4 MB) , in router, is this (i think it is) DDOS attack ?! than i decide to block every packet over 1500, can this be problems for some normal traffic ? becouse, i see some packet over 1500, but not much. btw, we used PPPoE , with MTU/MRU 1492/1492, over wire an...

marko_bg

upgrade one x86 P4 celeron2500, 5 wifi NIC

after 2-3h , i can connect with winbox , but everything are empty , and user can't connect on pppoe

but, router pass other taffic through him self ?

when do reboot with winbox, router reboot after 5-6 minutes ?

marko_bg

same MB ...

use netinstall, work for me

marko_bg

how to send
QueueType Target Upload = pcq_upload
QueueType Target Download = pcq_download

any idea ?

marko_bg

turbo mode , txpower=12dBm ...

this is good.

can turbo mode work with any extrachannel ?

btw, which country have most channel in turbo mode ?

marko_bg

is there any differents with SNMP , OID ... in 2.9vs3.3 ?

simple queue OID ?

marko_bg

I put 5ghz-turbo , but only 3 chanel

5210Mhz - same thing 1-30ms (P Troughtput 30mbps) ?!
5250Mhz - ping 1-3ms (P Troughtput 55mbps)
5290Mhz - not try

,can turbo-mode work on any extra-chanel ?

marko_bg

try 10, 6, 1 ... not stable , on 1 signal is -59 , signaltonoise are 44 card for this link are on same IRQ with USB (we not used USB), can this be problem ? on the AP side we have intel 440BX cip P3 , maybe this ? can the card be problem ? ... on AP side are some card on 5ghz with no vendor on it. b...

marko_bg

we have ptp link, this is picture from ap-bridge, 10.0.0.2 is PC behind station, traffic are routing ap ------- station ------ PC(10.0.0.2) same ping from : PC --- ap --- station --- PC(10.0.0.2) and same ping with 4/4-mbps, 1000/1000-p/s link have good signal , CCQ are 100% , nstreame=exact size , ...

marko_bg

what are your choice for dude server ?

HW:
p4 3ghz 2mb , 2gb ddr2 800mhz , 80gb sata2

btw, in routerOS I can not make export config, message are: can't make file ... ?!
on winXP work fine.

marko_bg

picture are attach

we have 3 x86 routers , all same error.

is this problem ?

marko_bg

now I see traffic , from our IP public (our client ) but to 192.168.100.1 ...

proto UDP ?

we have v3.2 on 2-3 core-gateway routers, but most AProuters are v2.9.50

if all this is ipv6 over ipv4 or not, ... how to block ?

how to control this traffic ?

btw, users have pppoe

marko_bg

we used public IP 4-5 C-class
and local IP 10.0.0.0/8

but, ..

in firewall I put log traffic and have: ,
proto41, 192.168.1.103>64.202.189.170 , len63 ... this is not IP we have in networks.

what is this ?

we drop this traffic , is this ok ?

marko_bg

I need to put in address-list , IP with over 200p/s

I think to put script in sheduler to run on 2-3 min

i have one router between APRBoard for user and internet router, and I need to put script on this ruter

router OS v3.2

is there way to do this ?

marko_bg

Is there any way to kill connection from terminal with some command. I can't open winbox: ip/firewall/connection, CPU go to 100% :( only solutios is to kill conn with some command from telnet or terminal I need to kill all conn with src.adr:x.x.x.x and dst.adr:x.x.x.x I can't used remove 1, remove 2...

marko_bg

I think , CCQ (client connection quality), is only info of maximum bandwidth ... If I have -40dB , if I set bandwidth on 54mbps , CCQ will be 100, if I set on 6Mbps CCQ will be 20 if I need only 1mbps, I set user on 6Mbps, and CCQ are 20, ... , this can't be problem, but, I am not sure. is this righ...

marko_bg

AP side have default seting, link have defult seting and connect on 48-54mbps, ccq 88-100 user have set 6Mbps only (fix rate) , for support and basic and have 6Mbps about 20ccq, on AP side: user are limit on 1mbps in queue link is not limit, only user on the and of this link mt(with queue for this u...

marko_bg

anyone ?

marko_bg

I do not try v3 ,

but ovislink work normal only with this firmware ...

http://www.appro54g.com/

try and tell us if this resolved problem.

marko_bg

one CM9 , with direct dish antenaa. antenna make link on 3km. on this cm9 I have connect one more user, on 60 degree from left on 1km link have -50 tx/rx user have -56 tx/rx link have 4/4mbps 800/800pps , ping are 1-5ms when user have 1/1mbps 100/100pps ... ping on link go to 1-150ms with 1mbps/256k...

marko_bg

i put ip from users pool in address list "change-TTL", and make : src-adr:0.0.0.0 dst-adr:change-TTL , set changeTTL on 3, , but ping go to 300ms, after 2-3 min ? who to make route on MT, to tell router that IP are on him ? ... and stoping router to seek this IP on other router, when packe...

marko_bg

we put TTL=3 (some user have router), and will wait to see what happend, but is there some way to capture packages with over 1000p/s or something like SPAM, UDP attack, or number of connection, or number of invalid try ... and then put this dst-IP in address-list or put src-IP in list and block ... ...

marko_bg

hm, ... ttl=2 ,

but this will back packages to MT2, and then kill ...

how to kill packet on MT3 when arrived, if IP did not assign ?

marko_bg

I think that I known what problem is, ... but, did not know how to resolved. we have static route for all IP, we have not used OSPF or RIP, but I think this cannot be reason ! my view of problem: internet traffic go to MT2 then go to MT3 then go to user(when user are connect), but ... ...when user a...

marko_bg

... and againg

user disconnect and paket go to 3000p/s ... but ...

we have found cause it is p2p but is not dc++ than SKYPE !!!!

what now ?!

marko_bg

yes, and this is strange, when start dc, on new IP, ... look like udp known where he is, and packages end (punch) on his machine, and link back to 1000p/s. one more thing, all UDP coming from internet, but packages are 3000p/s only between MT2-MT3, ... ?! this is strange, why packages not increase o...

marko_bg

... when user start p2p program (this have dc++), packet back to normal.

how to resolve this problem ?

mt staff , do you have any idea ?

marko_bg

we have after MT3 , more MT(network MT4-MT5-MT6 ....), average 100 users, we have user on MT1 and MT2 to, and link between MT2 and MT3 have average 1000p/s , this is normal, and link work ok with 1000p/s. but , one day pppoe are change IP to this user (on MT3), and then link MT2-MT3 jump from normal...

marko_bg

I have problem with this ... internet --- MT1 --- MT2 --- MT3(with PPPoE server), pppoe client using p2p, or sometnih else, and he have public IP, when he after etc. 6 days, change IP (dhcp)... traffic between MT2 and MT3, from standard 1000p/s, jump to 3000p/s , and procesor to 90%. I make firewall...

marko_bg

User connect, and MT make dinamic simplequeue but with queuetype "defaul-small" ...

How to tell MT to used diferent queuetype in dinamic simplequeue for PPPoE connection ?

marko_bg

I have this in log, and 2000p/s on interfaces, between 2 router , all public IP. I find this on internet "Type:11 Code:0 TTL EXCEEDED IN TRANSIT" When I have tih in log I have problem with link between this 2 router, latency 100-200ms this happend from my IP to multiple IP on internet , in...

marko_bg

I have diferent question,

proxy can not cache msn and yahoo ?

this sites not suport cache or I make mistake in setup ?

samsoft , did you have 2 hdd, one for sistem one for cache ?

marko_bg

hulk-bd, you must put this in first simplequeue (sam rule): limit-at=0/0 max-limit=0/0 , and if you need, in PCQ rule make lan speed, or put 0, if you make lan speed on other MT. and you must put one more rule , second ,with speed for noncache traffic . like this: name="cached" dst-address...

marko_bg

Hi samsoft08, tos work for me fine in 3.0rc7, but I need to make one more rule, ... I need to make rule for noncached traffic , like this ... user have 256kbps with 1mbps burst limit, ... I make PCQ with 256kbps for non cached traffic, and it's work. but how to make burst limit on that , if I make b...

marko_bg

Users have 1mbps to proxy, each Users have own IP not NAT, each users MT --> MT ruter --> MT Proxy --> Internet Can PCQ with Burst Limit, work this : User have 1mbps on 2 min, after that 256kbps, each. I know how make PCQ to 1mbps for each users, with one rules, ... but, how make Burst Limit on that...

marko_bg

freeradius: Framed-IP-Address = 255.255.255.254 Framet-Pool = pool-users mikrotik PPPoE: pool-gateway (local IP) pool-users (public IP) when I put different pool : Local Address = pool-gateway Remote Address = empty ( but I have "pool-users" make in Mikrotik pool) user change IP, on every ...

marko_bg

Why dude can't connect on WRAP with security winbox mode ?
and on 112 ...

work with 532a

did i make some mistake ?

btw, winbox work with security winbox mode .

marko_bg

... link on wifi adapter show only 10mbps, and link are red ?

I set Speed on 20, 30, 50, but ther is no change?

... ?

marko_bg

script read OID (simplequeue), and recived <pppoe-username-1> then used username-1 , put in disconnect request and send to radius ... radius send request to mikrotik ... but mikrotik have error 406 and put request in Naks. mikrotik have username with -1, but this "-1" make mikrotik and pro...

marko_bg

now I see this... .. if user have "-" , etc. <pppoe-user-name> disconnect work fine, but , if I try disconnect user with "-1" , etc. <pppoe-username-1>, (ghost or second login with same username), I recived error 406 my script find username with "-" over snmp, and send ...

marko_bg

When I try discconect user with "-" in username ,
etc. <pppoe-username-1> ,

... I recived this in log "Error-Cause = 406" ,

... 406 Unsupported Extension ... by who , mikrotik or radius ?

marko_bg

I have pool with 16 IP ( /28 ), on PPPoE server, with 10 users.
I have gateway pool with 172.16.xxx.xxx (254 IP)

RADIUS "Framed-IP-Address" are set on 255.255.255.254

but mikrotik do not change IP , user always take same IP ?

did mikrotik must change user IP or not ?

marko_bg

ok , I understand now.

for some reason, I must used snmp, and I will make something to counting 4 GB limit reached.

thanks

marko_bg

http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol Three simple data types are defined in the SNMPv1 SMI, all of which are unique values: 1. The integer data type is a signed integer in the range of -2,147,483,648 to 2,147,483,647. and connection bytes use same signed integer to count ...

marko_bg

why in winbox , when open simple queue , I see normal accouting traffic over, 4000 MiB ? this not used signed integer ? is there any way to reading this data right ? is this mean , if PPPoE user connect 30 days, and have traffic over 4000MiB, RouterOS send to Radius server , data with error ? I know...

marko_bg

ok,
and problems are in signed integer ?

marko_bg

if this is counter overflow ,... why in Queue List number are ok, and there is no error ? where is overflow , ... in reading method ? If in Queue List "Downloaded Bytes" have 5647 MiB, how SNMP read only 1600 MiB ? I have static rules in simple queue for acounting traffic for users and aft...

marko_bg

Hi,

do you have problems with this ?!

http://forum.mikrotik.com/posting.php?m ... ly&t=13753

marko_bg

I try this: on 2.8.16 with this http://wiki.mikrotik.com/wiki/Limiting_a_user_to_a_given_amount_of_traffic work fine, but after, 4000Mb , reading Accounting starting from ZERO (0) , but in OS still are ok number ??!! , 4001 ... 4500 ... 6000 , etc. in 2.9.38 with SNMP reading, same result, from 0-40...

marko_bg

:local traf; /queue simple :set traf [get [find target-addresses=("1.1.1.1" . $i)] total-bytes] :if ($traf > 1048576) do = { /tool e-mail send to=test@test.test subject="traffic info" body=(" You have, UPLOAD / DOWNLOAD = " . [get [find target-addresses=("1.1.1.1&q...

marko_bg

http://forum.mikrotik.com/viewtopic.php?t=12803

marko_bg

yes for antena-mode but, I have 2 ptp link, 2 x cm9, and 2 x sr on link with 2 x sr, when antena -mode, setup on a, latency are 600ms, but if I set on b, latency are, 1-10ms, signal are same. link are 7km., signal -59, 1,6dish how mod A have bad latency if this mode are for ufl main connector, and m...

marko_bg

CM9 ufl are on right connector (A antena) OS 2.9.38 2 x cm9 ptp link: in MT set antena A , signal on ptp link are -45, 6/6mbps , latency 500ms in MT set antena B , signal on same link are -75, 3/3mbps, latency 1-100ms, but 3/3mbps are max of speed ? 2 x sr5 ptp link: on SR5 , ufl connector used, in ...

marko_bg

piri,

ok,

I have this problem , when upgrade 2.8.xx to 2.9.xx , with license level 4

Cheers

marko_bg

when you upgrade from 2.8.xx to 2.9.xx , you must buy license level 5=95$

or do, backup and restore on new 2.9.xx

marko_bg

routerOS 2.9.38 make mangle for LAN traffic with address list. make static simplequeue rules with packetmark LAN traffic. when user connect , MT make dinamic simplequeue for this user, because, static simplequeue rules capture LAN traffic, dinamic traffic capture all other, and this is Internet ! no...

marko_bg · 2.9.34, work ok , no more ghost user in active connection

2.9.34, work ok , no more ghost user in active connection

marko_bg

*) fixed bug in PPPoE, PPTP and L2TP - some logged out users could still be shown in active
ppp users lists, disallowing re-login if only-one is set;

This , not fix.

It's happend again !

user still are in active list.

marko_bg

probably because, "Only One" did not work too.

... I try , and I can login from 2,3 ... 5 comps on same MT in the same time.

marko_bg

If I used "Only One" on "Yes" , user can not connect with one username twice on same MT ?

... or can ?

marko_bg

ask your provider for MTU and MRU setting

marko_bg

try set:
MTU=1492
MRU=1492

marko_bg

mikrotik team , I update from 2.9.29 to 2.9.30 , till now there is no number in pppoe interface, ... and today number are there, ... last 5 days, there is no number, and user are normal login and logout, all the time. Can you tell me, why MT add number in pppoe interface, and only for 3-4 users, one...

marko_bg

How to reset (disable/enable) pppoe server ? scenario: 15 servers in the city , ... When reset Radius server, radius not accounting users ... when reset 15 pppoe server (disable/enable) and user connect again , radius work ok. How to reset all 15 pppoe-server, with script, or any other way. command ...

marko_bg

I think for question 1, ... .... about accounting traffic, this is bug, because, one user, have transfer in one static simple queue rule 15GB (rule for FTP), and in another 5GB (dinamic rule from MT for pppoe user).... but radius have info only for 5GB transfer and other user have same rules, but ra...

marko_bg

questing 1 is some bug

but, what is the number in pppoe interface ?
<pppoe-user-1> , and in 2.9.29 , number are change 1, 2, 3, 4, 5 ...
what is that ?

marko_bg

scenario: radius server , pppoe server , username: net , only one connection per user and host , mt v.2.9.29 question1. when user connect in PPP interface in mikrotik are <pppoe-net-1> instede <pppoe-net>, what is "1" ? and this is not for all user, only couple. question2. about trafic , w...

marko_bg

h323 in netmiting can't work in MT with NAT port, or DMZ

only work with routing packet

desktopsharing work, but not everytime

chat work everytime

i try everything from v.2.6.7 to v.2.9.27

Search found 119 matches