We had the same problem. Is it possible to have the values of capacitors C802 and C825 in order
to change them ?

thanks

Fabio Piazzon

Is there a simple way to limit the total number of p2p sessions ? I have already tagged with mangle all p2p traffic and tried with firewall Filter Rules to limit the totale tcp traffic session (for example to 1000 sessions) but it doesn' t works ? here is the code: chain=forward action=drop tcp-flag...

Hi. Thank you for your answer. Nodes are linked via wireless. One more question.... is it necessary to have WDS ??? Is not possible to have "normal" routing ?

Thanks

Fabio Piazzon

Hi all. We have a wireless network with 3 principal nodes as you can see here http://www.wifiweb.it/network.jpg We are experiencing some troubles configuring routing between the 3 nodes without nat. The problem is that if we cannot activate natting in the interface that links 2 nodes we cannot reach...

Maybe it should be enough to log which web pages they visit. The fact is that here in Italy if you are an internet provider or something similar you have to take all the logs. Do you think it is enough the 'proxy logging' ?

thank you

Fabio Piazzon

Hi all. We have done a configuration with mikrotik boards. Everything goes well. Every client access the internet via NAT. The problem we have is to log all the traffic from the single client to the internet. Is it possible ora may we have to configure a linux gateway to log everything ? Thanks Fabi...

Now everything goes on ! Thank you all for the advices !

Fabio

Thank you... I have made this configuration but the problemi is that from the 2 wireless interface (that is AP and Client wireless interface) i can ping each other but from the ethernet one I cannot route all traffic from the ethernet one to the wireless one and then to the other AP. Probably I am d...

Hi all. I am trying to configure a routerboard 532 as an access point for many clients using RB112. On the 532 there is a CM9 configured as 'Ap Bridge' with Ip 10.0.0.1 . On the 112 there is also a CM9 configured as 'Station' with IP 10.0.0.10. I have done all the configurations and in this moment t...