Actually I solved the problem. When I've connected the 3G modem into USB port, it started to work and the USB port appeared in the list The ports aren't visible when the don't have a connection hooked up.
I have installed RouterOS on Alix2 board. The next problem which I'm facing is that the RouterOS doesn't see the USB ports which are available on the board. Actually there are 2 USB ports. In the "System" ---> "Ports" I see the following : alix_board_ports.png The question is : H...
I have this board : https://www.pcengines.ch/alix2d2.htm Using NetInstall I've installed RouterOS on a CF card, the autorun.scr is as following : ---------------------------------------------------------------------------------------------------------------------------- /port set [/port find] baud-r...
Have a look at this post: using some of these commands you could build an array with all marks: https://forum.mikrotik.com/viewtopic.php?f=9&t=53157&p=374555#p270583 sebastia, Thank you Sir, from the source which you've gave me, I was able to build this code : :global retrieveAllRouteMarks ...
Hello Guys, I'm writing a complex RouterOS script right now. I need to obtain the list of route marks, my Mikrotik router has 3 route marks, let say "route_mark1", "route_mark2" and "route_mark3". So for now I couldn't find the commands which will retrieve this list. In...
Hello Guys! I have strings like "something1%something2", I need to retrieve "something2". Example : let say I have this string "188.138.100.10%main_ether", I need a function that will retrieve the second part : "main_ether". How to do this using RouterOS built...
I'm going to connect 2 switches(CRS226-24G-2S+RM) in order to make them to work as a single switch. Unfortunately I don't have experience to interconnect mikrotik switches. Could I use this optical cable http://routerboard.com/SplusDA0003 ? If not, what is the best solution to provide the highest s...
From documentation it is not very clear. Will CCR1036-12G-4S router work with 10Gb SFP+ cable, at the rate of 10Gb ? I want to connect this router to a switch : Quanta LB6M using this type of SFP+ cable : S+DA0003. Will such configuration work ?
pe1chl, that's the exact point which I'm talking about. Mikrotik should move toward big enterprise, they can provide a broader range of possibilities than cisco/juniper and keep the price lower in the same time. Anyway the firmware in mikrotik routers is quite buggy yet, they should learn to test be...
I tried to connect (using USB cable) to this UPS : APC SMT2200I, but it didn't succeeded. The status of link is always "invalid". My Mikrotik router is : CCR1009-8G-1S-1S+
I want my router to monitor the status of UPS. Any help on how to do this will be greatly appreciated
I'm interesting in this issue also. I tried to connect the UPS (SC450RMI1U) to CCR1009-8G-1S-1S+ but nothing is happening. The status is always "invalid"
Ok, I solved the problem. My mikrotik is working as DNS server, but because of miss-configuration it was open to the public internet. A lot of people started to use it, it received thousands of requests per second, the switch port (from provider) is shutting down itself when there are too much traff...
Any news about v7 ? I understand that the mikrotik staff can't give an exact date. I would like to know at least if it will be released this year (2016) or not ?
I have new information from my internet provider. They told me that most likely my network has a DHCP client which floods their network, that's why a security mechanism restarts the switch's port. The problem is : I can't find the DHCP client. I have a quite small network and I have no idea which co...
I have a mikrotik router CCR1009-8G-1S-1S+ with 2 providers connected into it. It worked well for about half a year. Now I started to experience a strange issue, a link (ether5) from one provider started to go down for about a minute, next it is restored up again. See the screen shot for details eth...
...No sysadmin would deploy a new os release on his domain without fully testing in his environment..." - how do you suppose to test if your environment is running in production ? You have thousands of users and 10 of gigas in there and the env is a hybrid one with many devices from different ...
tirkitneth, yep, but how to deal with master-port ? how to tell other ports to use the trunk as the master-port ? Because for now when I choose the master port I see only ether ports in that list
barkas, Why shouldn't I use Mikrotik switches ? They provide me 24 ports which works at the wire speed, beside this I have access to router features (as you said). What is bad in this ? Moreover, this is very cool to have a switch with router capabilities Also I like very much to see 48 port switche...
karina, you are not right. "....Only a fool would deploy without testing in their own environment..." - do you test windows or microsoft office after you installed it on your PC ?? It is not important in which environment the software runs, it must run stable in any environment! And Mikrot...
cisco is much better than mikrotik. RouterOS is quite buggy compared to IOS, if you are dealing with serious business stick to cisco, you will sleep better at night
I don't know if I understand you right, but I have the same issue. When I install one SFP module into my CCR1036-12G-4S all 4 leds of SFP modules start to blink. Logically it must blink only one led, that where I connected my SFP module. Seems to be another RouterOS bug.
I want to connect using SFP ports a cloud core router CCR1036-12G-4S with a cloud switch CRS125-24G-1S, will this cable (http://routerboard.com/SplusDA0001) (model : S+DA0001) work for such a connection ?
hello, I'm also very interested in this topic. My provider connected me to a GPON network so I have a 1Gb optical connection. For now the optical cable goes into a Huawei HG8245H router, and next is connected to a CCR1036-12G-4S router. The problem is that I want to get rid of this Huawei router and...
My environment is completely mikrotik based, I have 2 cloud core routers, 5 switches and a few wireless access points, so I don't even think about other vendors. The sad thing is that mikrotik doesn't provide 48 ports switches that's why I need to build one from 2 (with 24 ports) I didn't specified ...
I'm going to connect 2 switches(CRS226-24G-2S+RM) in order to make them to work as a single switch. Unfortunately I don't have experience to interconnect mikrotik switches. Could I use this optical cable http://routerboard.com/SplusDA0003 ? If not, what is the best solution to provide the highest sp...
I also find this topic using Google. I had some troubles trying to reset 951-2n board as described in the official guide without any success. Using the "Trial and error" method I come up with this solution: 1. Disconnect everything from the device 2. Press and hold the reset button, in the...
I don't know probably this question has been raised already. Anyway, would be great to add support of MetaRouter for CCR1036-12G-4S. I have an environment where CCR1036-12G-4S is loaded approximately at 20%-25%. MetaRouter will allow me to use unused resources for other needs. Are there any plans to...
I'm one of attendees of MUM which has been held on August 23 in Moldova. The guys from Mikrotik told that the attendees will receive their free RouterOS in the evening or Monday. But until now (Tuesday evening) I didn't received mine. Can someone explain what is going on ?