Community discussions

MikroTik App

Search found 122 matches

by brasileottanta
Tue Apr 16, 2019 9:24 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192030

Re: LHG 60G experience

Colleagues, tell me, there is a line at 1,500 m., We were reducing antennas, but I noticed that after 30 minutes, the indicators just hang in one place and do not move, it only helps to reboot the devices or to tear the radio link. Hello , I' don't know what's the probs, but you need better aiming....
by brasileottanta
Mon Jan 21, 2019 9:34 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192030

Re: LHG 60G experience

Hello guys ,

Any news about different channel width like 1Ghz , 500Mhz and so ?

Thk :-)

brasileottanta
by brasileottanta
Mon Jan 21, 2019 8:55 pm
Forum: RouterBOARD hardware
Topic: Netinstall don't keep old configuration.
Replies: 0
Views: 892

Netinstall don't keep old configuration.

Hi guys , I upgrade a rb1200 via netinstall with keep old config , but the system lose configuration and install the default . On the serial console system say " not enought memory , formatting NAND " WITHOUT ask a confirmation for this. RouterBOOT ver 3.10 Anyone note this ? Bye brasileot...
by brasileottanta
Thu Jun 28, 2018 11:10 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192030

Re: LHG 60G experience

Hello ,

our first long link. Great !!! firmware 6.42.5
Try to set channel to 64800 in CLI, the attenuation in O2 is smaller in higher frequency
Hi ,
How I can do that ? manually ?



thanks

brasileottanta
by brasileottanta
Wed Jun 27, 2018 4:24 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192030

Re: LHG 60G experience

Hello ,

our first long link. Great !!! firmware 6.42.5
by brasileottanta
Sat May 26, 2018 10:55 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

after upgrade to 43rc19
by brasileottanta
Tue Apr 17, 2018 5:36 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

Hello ,

our first test on real link. Distance about 240m , perfect LOS without particular aim.

We using traffic generator for check bandwidth and latency. Test using tcp packet of 1500.

Very nice :-)

brasileottanta.

ps . please make a note on rc59 changelog for Ap Bridge BROKEN !! :-9
by brasileottanta
Thu May 30, 2013 11:25 am
Forum: General
Topic: Integrating Facebook Connect with Hotspot Login / Authent ..
Replies: 132
Views: 653352

Re: Integrating Facebook Connect with Hotspot Login / Authen

Hello ,


for working with ipad , iphone set this in walled garden:

dst host = www.apple.com

path = /library/test/success.html


brasileottanta
by brasileottanta
Thu May 30, 2013 11:06 am
Forum: General
Topic: Hotspot login equal to like in facebook
Replies: 2
Views: 9998

Re: Hotspot login equal to like in facebook

Hi Today I have a hotspot site where the user only have to hit accept to grant free Internet. Is their any solution where I can connect the login button to act as a like button in Facebook? So that the user have to like our company Facebook page to access free Internet. Regards Hi , see here http:/...
by brasileottanta
Sun May 26, 2013 8:42 pm
Forum: Scripting
Topic: Script for remove ip-binding in hotspot
Replies: 5
Views: 6596

Re: Script for remove ip-binding in hotspot

with this script you can remove all ip-binding entries.

ros code

ip hotspot ip-binding remove [find]
Thanks.:-) Do you know a script that remove all ip-binding of specific server ?

like this : ip hotspot ip-binding remove [find] server=myhotspot


bye.

brasileottanta
by brasileottanta
Sat May 25, 2013 7:16 pm
Forum: Scripting
Topic: Script for remove ip-binding in hotspot
Replies: 5
Views: 6596

Script for remove ip-binding in hotspot

I need a script for ROS , to delete all ip-binding inside hotspot.

I try some script but with no lucky.

Any working solution ?

Regard

brasileottanta
by brasileottanta
Sat May 25, 2013 4:50 pm
Forum: Scripting
Topic: Other probs to pass variable from php to js
Replies: 2
Views: 1458

Re: Other probs to pass variable from php to js

Yep. You must trigger PHP with "<?php" to access PHP variables: <?php $ip=$_POST['ip']; ?> unbinding.innerHTML = '<iframe src="http://xxxxx/binding-off.php?ipclient=<?php echo $ip; ?>"  "width="1" height="1"></iframe>'; Thanks.:-) It's incredible how com...
by brasileottanta
Sat May 25, 2013 4:21 pm
Forum: Scripting
Topic: Other probs to pass variable from php to js
Replies: 2
Views: 1458

Other probs to pass variable from php to js

Hi , I have also this probs to pass a variable : <?php $ip=$_POST['ip']; ?> <script> ............ var unbinding = document.getElementById('unbind'); unbinding.innerHTML = '<iframe src="http://xxxxx/binding-off.php?ipclient=$ip" "width="1" height="1"></iframe>'; ......
by brasileottanta
Sat May 25, 2013 10:47 am
Forum: Scripting
Topic: RouterOs php api .
Replies: 8
Views: 5605

Re: RouterOs php api .

First stop, I must note that despite the name, having PEAR2 itself is not required.

In fact, the syntax is very simple and logical. It was some time since I programmed and I must say that the syntax of these languages ​​is strange! :-)

Thanks again, I'll try PEAR2_Net_RouterOS.


brasileottanta
by brasileottanta
Sat May 25, 2013 2:12 am
Forum: Scripting
Topic: RouterOs php api .
Replies: 8
Views: 5605

Re: RouterOs php api .

The syntax for getting array members (and that's what comm() returns - an array of arrays) is with "[]", not ".". So replace $remove.id with $remove[0]['.id'] Thanks a lot !!!! I see that you use Pear2 Php , I use RouterOs api php . What is the main difference ? Bye :-) brasileo...
by brasileottanta
Sat May 25, 2013 1:12 am
Forum: Scripting
Topic: RouterOs php api .
Replies: 8
Views: 5605

Re: RouterOs php api .

You need to first do a "print", and get the ID of the entry you want to remove, and only then pass that ID in the remove's "numbers" argument (same as your second example, but with the ID instead of "0"). Tthanks for replay. <?php $ip_host=$_POST['ip-host']; require('r...
by brasileottanta
Fri May 24, 2013 10:15 pm
Forum: Scripting
Topic: RouterOs php api .
Replies: 8
Views: 5605

RouterOs php api .

Hi , I need a php script that delete a host from hotspot/ip binding. I try this : <?php require('router_class.api.php'); $API = new routeros_api(); $API->debug = true; if ($API->connect('1.1.1.1,'xxxxx','xxxxxx')) { $API->comm("/ip/hotspot/ip-binding/remove/0"); $READ = $API->read(false); ...
by brasileottanta
Thu May 23, 2013 11:52 pm
Forum: General
Topic: Integrating Facebook Connect with Hotspot Login / Authent ..
Replies: 132
Views: 653352

Re: Integrating Facebook Connect with Hotspot Login / Authen

Just put the dst host dst port and protocol into walled garden ip list. I think thats it!
Hello ,

Is not enough . Ip of facebook change quickly. Sometime work , sometime not. ( for smartphone and tablet ) .



Bye.
by brasileottanta
Wed May 22, 2013 7:34 pm
Forum: General
Topic: Integrating Facebook Connect with Hotspot Login / Authent ..
Replies: 132
Views: 653352

Re: Integrating Facebook Connect with Hotspot Login / Authen

Thanks. I found a solution to work with hotspot placed in NATted network . Basically using external captive portal. This is my working configuration. According with your request. What we need : 1 - a web server with FQDN or public static IP ( for facebook app registration ) 2 - a MT appliance on any...
by brasileottanta
Tue May 21, 2013 6:58 pm
Forum: General
Topic: Integrating Facebook Connect with Hotspot Login / Authent ..
Replies: 132
Views: 653352

Re: Integrating Facebook Connect with Hotspot Login / Authen

Anyway here I made some tutorial for what I've done, here is the link: http://blog.dyasrtrw.net/2013/04/login-hotspot-mikrotik-with-facebook.html It's using Bahasa (Indonesia Language), so if you want to read it in English, use Google translate :) Or click here to auto translate to English, Hello ,...
by brasileottanta
Tue Feb 05, 2013 4:50 pm
Forum: General
Topic: RB1200 . strange or normal ?
Replies: 3
Views: 1800

Re: RB1200 . strange or normal ?

Hello brasileottanta,
After restore a config from other RB , ..........
would you please so friendly and tell us first from which "other RB" you were taking the configuration backup?
Hi , sorry for delay

we have restore from RB 1100.

Thanks'
by brasileottanta
Tue Feb 05, 2013 4:09 pm
Forum: RouterBOARD hardware
Topic: RB Metal , issue with pppoe client.
Replies: 0
Views: 845

RB Metal , issue with pppoe client.

Hello Guys ,

I have a problem with a new RB Metal 2SHPn with pppoe client interface . When we try to create interface , the system say : could not create interface.

ROS 5.22 and firmware 3.0

Any solution ?

thank's in advance
by brasileottanta
Tue Jan 22, 2013 12:50 am
Forum: General
Topic: Throughput issue with rb1200
Replies: 4
Views: 1605

Re: Throughput issue with rb1200

:D That done the job - I can not believe my eyes! Explain please :) I have also turned off flow control on the rb250's before I made your suggested changes and it stopped the pauses. Should I re-enable them? The 1200's ether10 have a hardware(?) bug, it causes this problem. Search for this problem ...
by brasileottanta
Tue Jan 22, 2013 12:33 am
Forum: General
Topic: RB1200 . strange or normal ?
Replies: 3
Views: 1800

RB1200 . strange or normal ?

Hello ,

we have a rb1200 with ROS 5.22. After restore a config from other RB , we have noted in switch a strange thing , see the image.

It's normal ?

Thank's in advance .
by brasileottanta
Thu Mar 29, 2012 3:51 pm
Forum: RouterBOARD hardware
Topic: L4 on groove 2hn
Replies: 3
Views: 1345

Re: L4 on groove 2hn

yes you can. but we will soon have Grove A-2Hn also.

Ohoh , fine , we waiting .. :-)

thank again.
by brasileottanta
Thu Mar 29, 2012 3:41 pm
Forum: RouterBOARD hardware
Topic: L4 on groove 2hn
Replies: 3
Views: 1345

L4 on groove 2hn

Hello guys ,

Can I install L4 license on groove 2hn ?

Thank you

brasileottanta
by brasileottanta
Fri Feb 24, 2012 6:35 pm
Forum: SwOS
Topic: Swos 1.6 , more pauses
Replies: 5
Views: 4619

Re: Swos 1.6 , more pauses

Attach image of 250gs .

Any suggestions ? No overloads on ports. ( this is a 5 min. activity )


thank's


brasileottanta
by brasileottanta
Thu Nov 17, 2011 8:53 pm
Forum: General
Topic: rb1100+5.6 switch issue
Replies: 2
Views: 951

Re: rb1100+5.7 switch issue

Hi,
Fewi says
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.

Thank for remember.
by brasileottanta
Thu Nov 17, 2011 8:11 pm
Forum: General
Topic: rb1100+5.6 switch issue
Replies: 2
Views: 951

rb1100+5.6 switch issue

Hi , I have a rb1100 with 5.6 and have issue with switch configuration. I set 1 port as master , assign a dhcp server , pool , routing and firewall rules. Every work fine , but when i add a 2 port as slave to the first one , for few seconds all works , but after 10/20 sec no traffic pass , no pingin...
by brasileottanta
Wed Sep 21, 2011 9:15 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Hi ,

Problem solved :-)

Add ip to IP Binding on hot-spot configuration and not in walled garden.

Thanks for all

brasileottanta
by brasileottanta
Wed Sep 21, 2011 10:57 am
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Of course , but also with insert ip in walled garden don't work !!! This is the strange ...


So , now i set other RB ( starting with a vanilla config ) with same configuration to test if the problem still again.


Thanks

brasileottanta
by brasileottanta
Wed Sep 21, 2011 1:03 am
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Hi ,

pinging on all eth work only if clients are autorized from hot-spot .

brasileottanta
by brasileottanta
Tue Sep 20, 2011 12:05 am
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Sounds like a problem with the network behind the router, and not like a problem with the router. I have this : lan1 10.0.0.1/20 lan2 10.0.3.1/24 lan3 10.5.50.1/24 lan4 loop-back for hotspot 172.0.0.1/32 arp is enable on all and tree PPPoE server ( one for lan ) internet -> 192.2.0.32/24 inside fir...
by brasileottanta
Mon Sep 19, 2011 11:30 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Do you have address pools configured on the Hotspot profiles, or the Hotspot user profiles? If so you're poison ARPing the network. Change the address pools to 'none', and try again. No , this is correct. No pools inside hot-spot . ( no universal access ) So , i ping some ip like 10.0.1.x/24 and 10...
by brasileottanta
Mon Sep 19, 2011 10:52 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Yes , i do that. I think that the 3th is the correct one. But i check inside firewall of RB1100 and the only rules are about hot-spot. Normally traffic thought lan's is permitted and generally i had some rules to block them. Also , i don't ping from RB1100 hosts on lans. Only arp-ping work. I check ...
by brasileottanta
Mon Sep 19, 2011 8:39 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

I have other little prob :

i m connect on eth0 with 10.0.0.x/24 and want reach a host on eth1 without using a bridge.

Any suggestions ?

brasileottanta
by brasileottanta
Sun Sep 18, 2011 10:41 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Thanks , work great !!!!!

a creative solution :-)

Brasileottanta
by brasileottanta
Sun Sep 18, 2011 7:34 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Re: Multi hotspot on same router

Why 10.1.0.1 ?
by brasileottanta
Sun Sep 18, 2011 6:34 pm
Forum: General
Topic: Multi hotspot on same router
Replies: 16
Views: 3265

Multi hotspot on same router

Hi , I have tree hotspot on same router with this config: eth0 ->dhcp0->hotspot0 -> 10.0.0.1/24 gw 10.0.0.1 dns 10.0.0.1 eth1 ->dhcp1->hotspot1 -> 10.0.3.1/24 gw 10.0.3.1 dns 10.0.3.1 eth2 ->dhcp2->hotspot2 -> 10.5.50.1/24 gw 10.5.50.1 dns 10.5.50.1 i set a static entry in dns , exit ->10.0.0.1 , so...
by brasileottanta
Thu Sep 15, 2011 9:30 pm
Forum: General
Topic: Max PPPoE client
Replies: 3
Views: 1037

Re: Max PPPoE client

Yep ,i know.

So , about 300/400 client and simple queue with radius auth.

bye
by brasileottanta
Thu Sep 15, 2011 8:47 pm
Forum: General
Topic: DHCP users - default speed
Replies: 4
Views: 1261

Re: DHCP users - default speed

Hi ,

you need authentication for this.

If you don't want hotspot , can use PPPoE server with local accounting or MAC authentication .

bye
by brasileottanta
Thu Sep 15, 2011 8:00 pm
Forum: General
Topic: Max PPPoE client
Replies: 3
Views: 1037

Max PPPoE client

Hi ,

On RB1100 , how many PPPoE client can support ? And how many PPPoE server ?


thanks

brasileottanta
by brasileottanta
Thu Sep 15, 2011 4:33 pm
Forum: SwOS
Topic: Swos 1.6 , more pauses
Replies: 5
Views: 4619

Re: Swos 1.6 , more pauses

Thanks for answer.

We investigate on overload .


brasileottanta
by brasileottanta
Thu Sep 15, 2011 12:51 pm
Forum: SwOS
Topic: Swos 1.6 , more pauses
Replies: 5
Views: 4619

Swos 1.6 , more pauses

Hello Guys ,

in statistic , we have noted more paused packet on tx port . This port is linked with other rb250 at 1gb and on this port we have no pauses.


Any suggestions ?

barsileottanta
by brasileottanta
Sat Sep 10, 2011 11:15 pm
Forum: General
Topic: Bridge MAC issue ROS 5.6
Replies: 0
Views: 726

Bridge MAC issue ROS 5.6

Hello , I have a problem with rb1100 and ros 5.6. Configuration: eth0-eth5 -> in bridge dhcp on bridge. Dhcp assign a ip to an host with MAC xx:xx:xx:xx:xx:xx . When i ping this ip , we have no replay. Check the arp table inside host and the MAC is the MAC of bridge !!! Check dhcp inside rb1100 and ...
by brasileottanta
Thu Dec 16, 2010 2:49 pm
Forum: General
Topic: Ros 5.0RC5 issue with routing
Replies: 8
Views: 2283

Re: Ros 5.0RC5 issue with routing

try to disable proxy (in Hotspot, uncheck "Transparent proxy", AFAIR)
Thank's , problem resolved with a fresh installation . But , we don't know how ..... :-)
by brasileottanta
Tue Dec 14, 2010 10:37 am
Forum: General
Topic: Ros 5.0RC5 issue with routing
Replies: 8
Views: 2283

Re: Ros 5.0RC5 issue with routing

and what does traceroute (from customer's computer to the Internet) show when problem appears? traceroute stop to the router side ( from customer's pc to router ) . After 5/6 sec restart . We have change the ethernet adapter , but the problem still again . The processor is on 20/30% max during peek...
by brasileottanta
Mon Dec 13, 2010 7:14 pm
Forum: General
Topic: Ros 5.0RC5 issue with routing
Replies: 8
Views: 2283

Re: Ros 5.0RC5 issue with routing

connection stop
?

Customers don't surf internet .....
by brasileottanta
Mon Dec 13, 2010 4:49 pm
Forum: General
Topic: Ros 5.0RC5 issue with routing
Replies: 8
Views: 2283

Re: Ros 5.0RC5 issue with routing

image doesn't work, upload JPG maybe

Now is jpeg :-)
thank you
by brasileottanta
Mon Dec 13, 2010 4:43 pm
Forum: General
Topic: Ros 5.0RC5 issue with routing
Replies: 8
Views: 2283

Ros 5.0RC5 issue with routing

Hello ,

see the image , when routing go to 10%-15% of cpu , connection stop .

Ros 5.0RC5 on x86 Atom dual-core , 2Gb ram , hd 70Gb , about 70/80 connection with hotspot login and 4/5 PPPoe clients .

Any suggestions to resolve ?

thank's

Brasil
by brasileottanta
Fri Sep 11, 2009 4:18 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 358042

Re: Sample Hotspot Page - Sticky Please

This is our login page :-)
by brasileottanta
Wed Sep 09, 2009 4:09 pm
Forum: General
Topic: Bandwidth limit and P2p block
Replies: 2
Views: 2224

Re: Bandwidth limit and P2p block

if you use bridge, execute /interface bridge settings set use-ip-firewall=yes Thank's !! I forgot this :-( so , take a look to this example : / ip firewall mangle add chain=prerouting protocol=tcp dst-port=80 action=mark-connection \ new-connection-mark=http_conn passthrough=yes add chain=preroutin...
by brasileottanta
Tue Sep 08, 2009 11:31 pm
Forum: General
Topic: Bandwidth limit and P2p block
Replies: 2
Views: 2224

Bandwidth limit and P2p block

Hi Guys , I want to set max bandwidth for limit generic traffic . I found many examples to write a rule or simple queue to limit , but no one work. My ros is 3.28 and the rules in 2.9.50 work perfctly. What is the change from 2.9 to 3.X in firewall programming ? ROS 3.x and 2.9.x use the same sintax...
by brasileottanta
Wed Jul 29, 2009 9:27 pm
Forum: General
Topic: ROUTER OS QUEUE Issue
Replies: 13
Views: 3035

Re: ROUTER OS QUEUE Issue

Hi Guys , I have a rb133 with 3.15 and i set correctly bandwidth limit in ethernet interface to 1mbit. I also have a rb500 but in ethernet interface , in general tab , we haven't the possibility to set bandwidth. The firmware on rb500 is 3.24 . Is a driver issue or this feature is removed from 3.24 ...
by brasileottanta
Tue Feb 26, 2008 12:33 pm
Forum: Wireless Networking
Topic: Downgrade from 3.x to 2.9.50
Replies: 4
Views: 2665

Re: Downgrade from 3.x to 2.9.50

downgrade to v2.9.x will reset the wireless configuration.

Fine , great feature !!!! ( ironic ) :-)

Please , add this probs in readme-upgrade in evidence !!!!!
by brasileottanta
Tue Feb 26, 2008 12:30 pm
Forum: Wireless Networking
Topic: DHCP issue with 3.2
Replies: 7
Views: 2098

Re: DHCP issue with 3.2

Hi ,
yesterday , we have downgrade a cpe ( rb133c) to 2.9.50 and no probs with ip , so the ip lost is a bug !!!

But , carefully , the downgrade lost the configuration. If you have a remote router , you lost the connection !!!

Bye
by brasileottanta
Mon Feb 25, 2008 1:48 pm
Forum: Wireless Networking
Topic: Downgrade from 3.x to 2.9.50
Replies: 4
Views: 2665

Re: Downgrade from 3.x to 2.9.50

We have made now , but we have lost the connection !!!

The downgrade clear the configuration ?



Thank's !!!
by brasileottanta
Mon Feb 25, 2008 1:08 pm
Forum: Wireless Networking
Topic: Downgrade from 3.x to 2.9.50
Replies: 4
Views: 2665

Downgrade from 3.x to 2.9.50

Hi guys ,

How we can performe the downgrade ? We have upload the package to router , restart , but everytime is a 3.2 .. not downgrade!!!

Thank's
by brasileottanta
Mon Feb 25, 2008 11:48 am
Forum: Wireless Networking
Topic: DHCP issue with 3.2
Replies: 7
Views: 2098

Re: DHCP issue with 3.2

Hi ,

at this moment , we don't found a solution for this issue .

Is possible to downgrade to 2.9.50 from 3.x ?


Thanks'
by brasileottanta
Tue Feb 19, 2008 5:26 pm
Forum: Wireless Networking
Topic: DHCP issue with 3.2
Replies: 7
Views: 2098

Re: DHCP issue with 3.2

upgrade to 3.3
We have 1 client with 3.3 , but same problem ...

Thanks'
by brasileottanta
Tue Feb 19, 2008 5:09 pm
Forum: Wireless Networking
Topic: DHCP issue with 3.2
Replies: 7
Views: 2098

DHCP issue with 3.2

Hi guys ,

we have upgrade our network to ROS3.2 . No other change are made ( link , quality of signal , interference are the same ).

But now , our client lost every 10 min. the ip from external dhcp server .


Any suggestions ?


Thank's
by brasileottanta
Sat Feb 02, 2008 6:58 pm
Forum: Wireless Networking
Topic: pseudostation vs WDS and xr5 issue
Replies: 1
Views: 951

pseudostation vs WDS and xr5 issue

Hi guys ,

What ' s better to connect client , pseudostation or WDS ?

In version 3.x of ROS , the issue off-set in xr5 to work at 28db is the same of 2.9.xx?


thank's
by brasileottanta
Wed Nov 28, 2007 10:48 pm
Forum: General
Topic: very Strange Issue
Replies: 1
Views: 1093

Re: very Strange Issue

I have same probs on 2 rb133c . For reconnect , i do a disable lan and enable .


Any suggestions ?


p.s ROS 2.9.49 but also with 2.9.38
by brasileottanta
Sun Nov 18, 2007 8:27 pm
Forum: Wireless Networking
Topic: 5500 - 5700Mhz
Replies: 6
Views: 2579

Re: 5500 - 5700Mhz

Hi ,


try Italy for 5.180 to 5.700

Bye
by brasileottanta
Wed Jul 25, 2007 6:40 pm
Forum: Wireless Networking
Topic: Has anyone used an XR5 in 5.4ghz
Replies: 2
Views: 1059

Re: Has anyone used an XR5 in 5.4ghz

Hi ,

we have a BS with XR5 in 5.4ghz. Set the correct domain for use this freq ( we use Italy )




Bye
by brasileottanta
Thu Jul 19, 2007 12:05 pm
Forum: Wireless Networking
Topic: WR: 304km with RouterOS + XR5 + handmade antenna
Replies: 77
Views: 70881

Re: WR: 304km with RouterOS + XR5 + handmade antenna

Hi Mipland,

if you want , we try a link to about 400km. We have a tower on Vesuvio and a lot of friends in CB ...


Bye

Marco
by brasileottanta
Thu Jul 19, 2007 11:57 am
Forum: Wireless Networking
Topic: WR: 304km with RouterOS + XR5 + handmade antenna
Replies: 77
Views: 70881

Re: WR: 304km with RouterOS + XR5 + handmade antenna

E vai cosi !!! :-)

Ottimo lavoro :-)

Saluti

Marco
by brasileottanta
Sat May 26, 2007 2:30 am
Forum: Wireless Networking
Topic: SR2 re-associate problem
Replies: 163
Views: 26961

Re: SR2 re-associate problem - also XR5

Hi guys ,

i have same problem with XR5 with 2.9.42 . When use winbox to control/config the AP , the system come instable. Deauth , variation of noise-floor ( from -100 to -115 ) .

RB532 with 2 miniPci ( 1 XR5 and 1 SR2 ) , but with problem only on XR5.

an suggestion's ?
by brasileottanta
Thu May 24, 2007 12:01 pm
Forum: Wireless Networking
Topic: AR5213/5413, RB PPPoE and OSbridge 5XLi disconnection issues
Replies: 8
Views: 2913

Today , i have connect a client with osbridge to a new BTS at 5ghz with xr5 .

Identical problem. Random disconnection , lost pinging .

Perfect LOS , signal up to -48 .

bye
by brasileottanta
Thu May 24, 2007 11:58 am
Forum: Wireless Networking
Topic: Ubiquiti 600 mw card out for 2 and 5 Ghz
Replies: 59
Views: 16508

Hello Brasil, I always recommend leaving the Tx power setting to default. If you decide to change it, just remember that the Xr5 has a 10dB power offset. So if you set the MTik to 18dB you will actually be outputting 28dB of power. And I always recommend grounding the card. Thanks, Mike Thank's Mik...
by brasileottanta
Wed May 23, 2007 11:29 am
Forum: Wireless Networking
Topic: AR5213/5413, RB PPPoE and OSbridge 5XLi disconnection issues
Replies: 8
Views: 2913

This is the rf stat of 1 CPE osbridge xli5g RF Statistics: Watchdog Timeouts: 0 Hardware error interrupts: 0 Beacon Miss interrupts: 0 Recv Overrun interrupts: 0 Recv EOL interrupts: 0 TXmit Underrun interrupts: 0 TX Management frames: 38 TX Frames discarded prior to association: 0 TX Frames discard...
by brasileottanta
Wed May 23, 2007 11:24 am
Forum: Wireless Networking
Topic: XR5 strange issue
Replies: 1
Views: 848

XR5 strange issue

Hi guys ,

on datasheet of XR5 say : AR5414 , but my MT with 2.9.40 say the chipset is a AR5413.

Is a problem of ROS or the datasheet of XR5 is wrong ?


Thank's
by brasileottanta
Wed May 23, 2007 9:42 am
Forum: Wireless Networking
Topic: AR5213/5413, RB PPPoE and OSbridge 5XLi disconnection issues
Replies: 8
Views: 2913

OSbridge have a problem with PPPoE ...they mess with the mac of the pppoe server . Yet another thing to throw in the bin

Hi ,

but we don't use PPPoE , the osbridge is configured as bridge ( trasparent ) .

Is a MTU problem ?

Thank's
by brasileottanta
Wed May 23, 2007 12:37 am
Forum: Wireless Networking
Topic: AR5213/5413, RB PPPoE and OSbridge 5XLi disconnection issues
Replies: 8
Views: 2913

Hi ,

I have some problem too.

No solutions ?

Thank's
by brasileottanta
Tue May 22, 2007 8:35 pm
Forum: Wireless Networking
Topic: Ubiquiti 600 mw card out for 2 and 5 Ghz
Replies: 59
Views: 16508

Info on xr5

Hi Mike-Ubnt, we have now an xr5. Our BTS have 1 sr5 and 1sr2. Work fine and regulary. We have change sr5 with a new xr5 , but no special things .... So , 2 questions : first , in MT 532 with 2.8.40 , how tx power setting for max performance ? ( actually we have set to 28db ) second , Is necessary c...
by brasileottanta
Mon May 21, 2007 4:44 pm
Forum: Wireless Networking
Topic: Problem with MAC Telnet
Replies: 0
Views: 694

Problem with MAC Telnet

Hi Guys ,

We have 6 CPE with 133c and some radio ( senao , ubnt ) , on 2 of this , no MAC Telnet work .... Every CPE have identical configuration and release ( 2.9.38 )

Any suggestions ?
by brasileottanta
Sat Dec 16, 2006 1:09 pm
Forum: Wireless Networking
Topic: Freq issue
Replies: 5
Views: 1667

i see that too, so i thought that ubiquity made its cards for US use primary (5.7Ghz) and operating from 4.9-6.1 Ghz as atheros chipset. As you know amplifiers work best @ certain freq, so 400mw is just another LNA over atheros reference design. Thank's. We set our BTS on 5.7. In Italy only the fre...
by brasileottanta
Fri Dec 15, 2006 9:37 pm
Forum: Wireless Networking
Topic: Freq issue
Replies: 5
Views: 1667

For precision:

5500 -94db
5520 -95db
5560 -96db
5600 -98db
5660 -101db
5700 -102db


Any suggestion or experience ?
by brasileottanta
Fri Dec 15, 2006 9:29 pm
Forum: Wireless Networking
Topic: Freq issue
Replies: 5
Views: 1667

For two reason:
- the simpliest: there's lower noise on 5800 than 5500;
Why ? No other 5ghz equipment in area ( lab test )
- your antenna is not correctly adapted to 5500.
We have tested without antenna , on lab.



thank's
by brasileottanta
Fri Dec 15, 2006 7:35 pm
Forum: Wireless Networking
Topic: Freq issue
Replies: 5
Views: 1667

Freq issue

Hi guys,

If i set a freq to 5800 , the noise floor better then freq low ( like 5500 ) . Why ? I use SR5 and RB532


thank's
by brasileottanta
Fri Dec 15, 2006 7:18 pm
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

Hi ,

the only difference with 2 bts is the enclosure. One is in plastic , one in alluminium .


Now , I test a SR5 with RB532 and the noise floor is -95 ( no other wireless net in area ) . Why is low ? .


Bye
by brasileottanta
Tue Dec 12, 2006 5:58 pm
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

same channel, same no configuration (minimum = ssid, band, frequency ip)? :roll:
Yes :-( equal everithigs ....

Now I change other things .. but ....
by brasileottanta
Tue Dec 12, 2006 4:00 pm
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

I'm frustrated :-( I install the new bts with sr2 , but no change !!! Same antenna , same cable , same position : with a stupid linksys , my client connect fine ( also client distant 3/4 km .. ) , with a rb112 and 1 sr2 nothing. I test also a 50m from antenna : linksys ping 3 ms , sr2 ping 100/240ms...
by brasileottanta
Sun Dec 03, 2006 11:53 am
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

Today I tried my new SR2 with RB112. My problems like with 8602 disapeard. The recieving signal levels from clients are very good (even slighty better then thoose from linksys). Now what I noticed: 1./The client cards hopping over speed rates (they have Tx Rate set to fixed 5.5Mbps in the driver, n...
by brasileottanta
Sat Dec 02, 2006 1:10 pm
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

Boro , actually the card we use is a Zcom 622h b/g. Work fine and better then Senao . Have 23 db of max power , more sensibility. We have a station with this card ,with -123 noise floor !!! With Senao 8602 Plus ( FCC ) in identical site we have -91 noise floor !!! Bye p.s. we test the sr2 today ....
by brasileottanta
Thu Nov 30, 2006 11:59 am
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

Where I violate the policy ? and isn't my volonty to violate ...I report a real problem !!!
by brasileottanta
Thu Nov 30, 2006 11:24 am
Forum: Wireless Networking
Topic: Linksys WRT54GS much better then RB112+Senao NMP-8602+ (FCC)
Replies: 55
Views: 11159

What is my post ? ???
by brasileottanta
Mon Nov 27, 2006 11:11 am
Forum: Wireless Networking
Topic: Noise Floor
Replies: 12
Views: 2953

Yes, you are right, but this is not MT, this is basic physics...
Yes , I know that. Only for remark.

We have a lot of problem with MT . We have a real scenario in dense urban coverage.

So , in next days , i post our experience and our problems.


Ciao
by brasileottanta
Mon Nov 27, 2006 11:06 am
Forum: Wireless Networking
Topic: Noise Floor
Replies: 12
Views: 2953

Yes, you are right, but this is not MT, this is basic physics... :lol: If you start from zero (0), and continue in a negative direction (towards -90) then continue towards -120, then -90 is a higher value than -120, capish? eg: High number 5 4 3 2 1 0 -1 -2 -3 -4 . . . -90..... [noise here is highe...
by brasileottanta
Sun Nov 26, 2006 8:48 pm
Forum: Wireless Networking
Topic: Noise Floor
Replies: 12
Views: 2953

So , a BTS with -120 Noise Floor is better than a BTS with -90 Noise floor .. Correct ? :-)
Yes, i think this is obviously.
Mipland , on MT and here , nothing is obviously.
by brasileottanta
Sat Nov 25, 2006 9:01 pm
Forum: Wireless Networking
Topic: Noise Floor
Replies: 12
Views: 2953

But Sergejs , high noise-floor is better then low ? ( actually we have on a BTS -86dbm and on other -119/-123 )
Thank's
Less noise is always better, so a low noise floor is better than a high one...
So , a BTS with -120 Noise Floor is better than a BTS with -90 Noise floor .. Correct ? :-)
by brasileottanta
Fri Nov 24, 2006 11:12 am
Forum: Wireless Networking
Topic: Power output for Senao NMP-8602
Replies: 39
Views: 15599

Really? What's your province?
Naples and you ?


Ciao
by brasileottanta
Thu Nov 23, 2006 8:57 pm
Forum: Wireless Networking
Topic: Power output for Senao NMP-8602
Replies: 39
Views: 15599

So , every senao have a consumption of 1.3A . At 12v the cosumption is out of range .... Senao and all other mPCI is 3.3V, NOT 12V. So, if we assume the max current consumption: Routerboard: 3W Senao 8602 Plus (FCC/ETSI) : 3.3V*1.3A=4.29W Routerboard + 2 x Senao 8602 Plus = 11.58W Sorry , my mistak...
by brasileottanta
Thu Nov 23, 2006 5:45 pm
Forum: Wireless Networking
Topic: Noise Floor
Replies: 12
Views: 2953

You can search in the forum to get more detailed information aboit 'noise-floor' values, e.g. the particular topic gives exact answer, what does 'noise-floor' means: http://forum.mikrotik.com//viewtopic.php?p=33302&highlight=noisefloor#33302 If you are talking about 'noise-floor-threshold' conf...
by brasileottanta
Thu Nov 23, 2006 12:11 pm
Forum: Wireless Networking
Topic: Power output for Senao NMP-8602
Replies: 39
Views: 15599

RouterBOARD max. power consumption=14W. 2-3W is used by RouterBOARD itself. You can calculate power produced by 3 wireless cards at the maximum I (Power=I^2*U), check the technical specification to get values for I and U. So , every senao have a consumption of 1.3A . At 12v the cosumption is out of...
by brasileottanta
Wed Nov 22, 2006 5:11 pm
Forum: Wireless Networking
Topic: Noise Floor
Replies: 12
Views: 2953

Noise Floor

Hi Guys,

what is the best level for Noise Floor ?

Thank's
by brasileottanta
Tue Nov 21, 2006 2:06 am
Forum: Wireless Networking
Topic: Ap problem on one sector - poor performance
Replies: 11
Views: 2841

Hi ,

but Karyal , how the traffic influence signal streght ?

Bye
by brasileottanta
Tue Nov 21, 2006 12:30 am
Forum: Wireless Networking
Topic: Power supply question
Replies: 1
Views: 1227

Power supply question

Hi guys ,
definitively, what is the better choise of power supply with this configuration ?

RB 112 + 2 senao 8602 FCC Plus ( at 26db )

Power consumption of senao ( datasheet ) 1.3A

Thanks'
by brasileottanta
Tue Nov 21, 2006 12:08 am
Forum: Wireless Networking
Topic: Ap problem on one sector - poor performance
Replies: 11
Views: 2841

Hi

I have identical probs , but in 2.4GHZ band. I reduce ( but no solving ) the effect switching from B to G mode ..

With 9 / 10 client every work .

what type of board you have ? And what type of card ?

Bye
by brasileottanta
Fri Nov 17, 2006 1:12 am
Forum: Wireless Networking
Topic: strange Ping-times...
Replies: 11
Views: 4199

with atheros 730meters clear view max 12Mbit but in my case, 34 neighbourhood APs min 2 per channel on all 14 channels Hi , some problems with my station . But i reduce the effect with put every client in G only mode . In B only mode , i reveice the ip from dhcp server external connect to eth of mi...
by brasileottanta
Thu Nov 16, 2006 2:08 am
Forum: Wireless Networking
Topic: strange Ping-times...
Replies: 11
Views: 4199

Hi ,

no news about this tread ?
by brasileottanta
Mon Sep 11, 2006 5:09 pm
Forum: Wireless Networking
Topic: Incompatibility with centrino 3945abg
Replies: 2
Views: 1068

you need to use MT version 2.9.25 or later and turn ON the propritary extensions under the advanced wireless settings
Thank's a lot , now working ...


Marco
by brasileottanta
Sat Sep 09, 2006 11:08 pm
Forum: Wireless Networking
Topic: Zcom 900 Mhz minipci
Replies: 3
Views: 1630

Zcom 900 Mhz minipci

Hi guys ,

anyone have tested this radio with mikrotik ?

Thank's

Marco

http://www.zcomax.co.uk/doc/GZ-901.pdf
by brasileottanta
Sat Sep 09, 2006 8:53 pm
Forum: Wireless Networking
Topic: Incompatibility with centrino 3945abg
Replies: 2
Views: 1068

Incompatibility with centrino 3945abg

Hi guys,

anyone have notice about incompatibility with a5213 in rb112 with 3945abg ?

I have a rb112 with this mini-pci radio ( zcom - senao ) , with my notebook with centrino duo , i don't see any signal ..... but the notebook work with many other AP ...

Thank's

Marco
by brasileottanta
Fri Jul 14, 2006 2:15 pm
Forum: Wireless Networking
Topic: Station-WDS client talking to Prism AP
Replies: 3
Views: 1727

Hi NathanA,

I have similar problem .
With a AP ( no MT ) Prism 2.5 chipset and WDS active , only in wds-slave mode i can connect a CPE ( routerboard 112 with 2.9.24 ) .

Also you , i have read all forum and documentation , but no one have resolved .

Bye

Marco
by brasileottanta
Fri Jul 14, 2006 2:07 pm
Forum: Wireless Networking
Topic: Mikrotik Quality?
Replies: 10
Views: 3898

Hi , we have used for many time Repeatit solution. The system is simple to use , no more expensive and with in mind a carrier !! BS e CPE with a software managent cost approx ( for 100 customer ) 30.000,00 to 35.000,00 Euro. MT is a good solution , but haven't in mind a carrier ! More complicate to ...
by brasileottanta
Sat Jul 08, 2006 1:19 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

@MikroTik: Perhaps MikroTik would want to take a look at this code to decide if to include it in some future version? (GPL) Because it's a fact that we can explain, WHY this doesn't work. But as Marco (and others) have said, many cheeeeaapo wireless clients do provide at least partial work-arounds,...
by brasileottanta
Fri Jul 07, 2006 11:09 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

Probabily , or probabily not ..... depend from answer .. you answer is not correct ( the first answer ) Just for completeness: Which answer is not correct? Best regards, Christian Meis "And PLEASE learn to use the search function of this forum " --> this one is not politically correct ......
by brasileottanta
Fri Jul 07, 2006 11:03 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

Marco, I don't know how other vendors are doing it, but I know of some code to accomplish this under Linux. You have to do MAC-NAT, inspect (and change on the fly) ARP requests/answers etc. to get a "real" transparent bridge. @MikroTik: Perhaps MikroTik would want to take a look at this c...
by brasileottanta
Fri Jul 07, 2006 5:32 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

1. It's workaround. 2. WDS configuration is not complicated. -All you need for the AP configuration, mode=ap-bridge wds-mode=dynamic wds-default-bridge=bridge1 (wlan interface in the same bridge). - mode=station-wds wds-default-bridge=bridge1 (wlan, Ethernet interface). I suppose, that's all. Thank...
by brasileottanta
Fri Jul 07, 2006 5:01 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

brasileottanta , it's 802.11 limitation (not RouterOS). this topic was discussed many times here. Thank's Sergejs , but other os and hardware work in 802.11 standard . How do this ? Example : we have a BTS Repeatit ( soecris hardware with custom linux on board ) and CPE Repeatit can cannect without...
by brasileottanta
Fri Jul 07, 2006 4:50 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

I don't want to argue with you. Being rude to people here on the forum will probably not get you more answers... Probabily , or probabily not ..... depend from answer .. you answer is not correct ( the first answer ) But as the standard 802.11 wireless protocol only has room for THREE MAC addresses...
by brasileottanta
Fri Jul 07, 2006 10:11 am
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

Set wlan1 to station mode Set a public ip on the ether1 such as 192.168.1.1 Setup a dhcp server on the ether1 that gives out a range of ip such as 192.168.1.100 to 192.168.1.200. Setup a default gateway as 192.168.1.1 Go to firewall, go to nat, set general "srcnat" set sorce address as 19...
by brasileottanta
Fri Jul 07, 2006 10:06 am
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

Standard question, standard answer: Yes , is a standard question , but at this moment *NO STANDARD ANSWER* !!! You can NOT bridge a wireless station (protocol limitation). Use WDS for that. I think that you don't understand question. And is not a protocol limitation , but a routeros limitation , ot...
by brasileottanta
Thu Jul 06, 2006 5:09 pm
Forum: Wireless Networking
Topic: Simple CPE - Station mode
Replies: 17
Views: 5550

Simple CPE - Station mode

Hi guys,

How to configure a rb112 as a simple cpe ?

I have a wlan1 and eth1 , create a bridge , connect to a remote AP , the system give me the ip ( dhcp server on ap side ) , but no ping .


Any suggestions ?

Thank's
by brasileottanta
Tue Jul 04, 2006 8:14 pm
Forum: Wireless Networking
Topic: problem linking 2 rb 112 whit atheros Atheros 5213
Replies: 24
Views: 4168

I had tyied whit the config in http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks and it dosn't work. I suppose that the page have some bugs, because I don't obtain the results showing there, in addition when I add the bridge port using winbox, the connection via ethernet was lost, and...
by brasileottanta
Tue Jul 04, 2006 5:59 pm
Forum: RouterBOARD hardware
Topic: Hyperlan2
Replies: 5
Views: 2892

I don't think routeros supports Hyperlan 2 but then again, what does? If you can find -anything- that supports Hyperlan 2 please do send me a link; lists@arcticwireless.no Sure , but a friend tell me that in Norway or Finland there is a company with a firmware to use atheros with hyperlan2 , but i ...
by brasileottanta
Sat Jul 01, 2006 7:49 pm
Forum: RouterBOARD hardware
Topic: Problem with zcom xg-622H
Replies: 4
Views: 2502

:-( no work again ....

but now we know why ... we have our installation on tv-broadcaster tower , we the broadcaster is off , every things work . When go on , not work ... interference on motherboard ??
by brasileottanta
Sat Jul 01, 2006 7:46 pm
Forum: RouterBOARD hardware
Topic: Hyperlan2
Replies: 5
Views: 2892

Re: Hyperlan2

http://www.mikrotik.com/docs/ros/2.9/guide/driverlist[/quote]

Thank's , but do you know what is hyperlan2 ?


bye
by brasileottanta
Sat Jul 01, 2006 9:32 am
Forum: RouterBOARD hardware
Topic: Hyperlan2
Replies: 5
Views: 2892

Hyperlan2

Hi guys,

There is no support for hyperlan2 in routerOS ?

Thank's
by brasileottanta
Sat Jul 01, 2006 9:23 am
Forum: RouterBOARD hardware
Topic: Problem with zcom xg-622H
Replies: 4
Views: 2502

if you use the card with routerboard , do you have a proper powersupply ? under heavy load is this card is sucking up to 1500mA
We use a passive POE at 48V ( original equipment from mikrotik ) . But , we have change the antenna , from omni to panel , and now work fine .

Thank's
by brasileottanta
Wed Jun 28, 2006 10:01 am
Forum: RouterBOARD hardware
Topic: Problem with zcom xg-622H
Replies: 4
Views: 2502

Problem with zcom xg-622H

Hi guys ,

anyone have tested this card with RB112 ?

We have a lot of problem , in B/G mixed mode , no connect to other client , only in B or in G work , but pinging directly the wireless card the time is non accettable ( random 5- to 145 ms .. )

Bye