FIXED as suggested by AlainCasault - disabled time sync in IP -> CLOUD - configured NTP Client to point to LAN time server A suggestion to Mikrotik staff (no polemic or controversial intentions): CLOUD submenu label... sounds a lot marketing, but quite misleading... I expect most of your clients to ...

Hi all. Yesterday I reset all my six SXT5s after a major reconfig. At 15:28 UTC (pretty positive this was the actual time) I got this log entry from only one of the six radios: Mar 28 15:36:41 radio1.xxxxxxx.xxx cloud change time Mar/28/2017-15:34:55 => Mar/28/2017-15:36:41 Why this eight minute shi...

Hi all. My MK radios are setup to send syslogs to a central collector. They are all P-t-P links. Twice or thrice a day from one single radio I can see this entry: Mar 27 15:05:59 radio5.xxxxxx.xxx air0: data from unknown device D4:CA:C0:A8:0A:02, sent deauth How should I interpret this one? device w...

Fixed it today!
All other things being equal, I changed wireless protocol between office and home from nv2 to 802.11
Working now! The speed lan server to home still the same, the speed internet to home doubled to 15MB
(don't ask me why....)
Thanks to all.

Alessandro

I got BTest working. From SXT CPE homeside1 (see diagram) to 2011iLS inwall: Tx/Rx Total Average: 50.3 Mbps/38.6 Mbps (I guess BTest is not "pushing" the connection to its limits, real connections go double than that...) I start to suspect something else is going wrong after (if you see it...

btest doesn't connect... I activated it on the 2011... but no game :-/ Any trick? ping from my home workstation to local server @ office (200 pings, at 100ms intervals) $ sudo ping -c 200 -i 0.1 192.168.5.3 .. bla bla bla.... 200 packets transmitted, 200 received, 0% packet loss, time 20032ms rtt mi...

Hi again. Sorry for the delay, clients (fortunately) kept me busy :-) Here's the diagram (checked via traceroute the path is what is supposed to be) follow the colored lines for speed tests from internet->officelan, officelan->homelan, and internet->homelan cleaning up the route tables of useless st...

Thanks for all your notes. if you can post the ip routes for each of the routers. ie 2011 sxt off sxt home then any other router after that [[[[ie 2011]]]] # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S ;;; OutWall (deafult gw to the internet) 0.0.0.0/0 192.168.12.2 1 1 A S ;;; vpns via fedora2 172.2...

So do you have static routes on each of the sxt's as well as the 2011 pointing to all the lans you require access to? YES, or at least this was the intention... while putting together the diagram I started noticing a few strange (at least to me) things: [[SXT@officeside]] interface print 0 RS eth0 ...

Were you able to understand (or at list "suspect") if/how this "low spikes" are connected with other facts like: - a system in the lan shutting down or rebooting? - a system in the lan switching the ethernet adapter into promiscous mode? - electromagnetic interference? (an elevat...

so just to confirm you have the mikrotik 2011 --->3com switch1 ---->SXT-----wirelesss------ to other office devices Well, close with a little change: mikrotik 2011 --->3com switch1 ---->all wired office devices + the SXT@office-~~radiolink~~-SXT@home---home devices Which interface on 2011 is your h...

Where are your ip addresses coming from if you are not running dhcp. At the office: . adsl router behind the 2011iLS box provides to wireless clients dhcp addresses only for the internet (such IPs are "by design" unroutable to/through the 2011iLS box - guests can see only the internet) . ...

Please try disable your firewall on your mikrotik to see if that makes a difference I tried, it doesn't make any difference. run export hide-sensitive I did it on the entry point box [the 2011iLS router] I found a few incongruities vs what I see through the WEB UI. I'll have to recheck them, see if...

I'll try this evening when I go back home.
I'll let you know the results.
Thanks

> Are you running any firewall rules? Some at the "entry point" from the internet in the Mikrotik 2011iLS box: 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 chain=forward action=fasttrack-connection log=no 2 ;;; default configuration chain=forward...

I do not NAT between office and home lans. As I wrote: > - do not NAT > (systems in the office lan need to know what Ip at home is requesting services) > . office lan is 192.168.5.0/24 > . home lan is 192.168.3.0/24" In other words, my systems in the officelan need to know which IPs at home are...

Hello all, I searched the forum and didn't find any post about this issue. Hope this post is not a duplicate. If so, please just point me to the other post. Here's the scenario: {homelan}--->[mikrotic CPE](<--radio link-->)[mikrotic PTP-bridge]<--- ---{officelan}--->[mikrotik 2011iLS]-nat-->[adsl ro...