labels not

Amm0

... the devices on the map & in general Dude likes to operate with SNMP not RouterOS commands. - If you want to monitor devices on each of those ... types to monitor BUT complex... - If you want to customize the device labels to show your own things... See my post about LTE tracking here: https://forum.mikrotik.com/viewtopic.php?t=192103&hilit=dude+lte ...

Amm0

... needs two ends to be usable & and without the link... it's not tracking traffic, which is likely what you want. The links are one-to-one, ... objects if you have more than one interface. Those can have labels like WAN etc. to clarify what where the links go.

rememberme

... the way the dude does. I keep it for almost only this reason. I'm not gonna start any sort of a contest like what's better, a hammer or a screwdriver, ... agent. This agent is used just to offload the server from updating the labels (I use SNMP OIDs in device's labels), MAC mapping, DNS resolving ...

SergeS

... retrieved from network devices, but displayed on the way is NOT associated with such devices. Will try to explain on some examples: 1) ... points, each of them has two bands, 2.4GHz and 5 GHz. I have setup labels of such access points to indicate number of clients (per band) registered ...

SergeS

Thanks for the label written out. Just copied it ! JFYI, have modified labels to fix rounding and to show total volume size... Here is the label: ... first line report: [device_performance()][Device.ServicesDown] ? I did not see any relevant parameter, seems like it does not really informative ...

idmytrenko

The difference is that square brackets are not required, lol ros_command(":local result [/tool fetch mode=https url=\"https://10.10.10.10/xml/json.php\?mode=all&id=102\" http-method=get user=username password=password as-value ...

stmx38

... Note: After file upload it will take some time for mibs/images to become available on client side for use in labels/maps/etc. To get files available right on the spot disable and enable the server.

cheloalb

Hello everyone,

I am trying to put information through OID's on the labels with non-RouterOS devices and it does not work.

With Mikrotik equipment works very well, but when I put other equipment is blank, does not give error or anything, but does not receive any information. Any ideas?

jbhur

... under a P1 license within a Hyper-V virtual machine. It runs well. I'm not doing any routing. I'm using the VM solely as a Dude server. It's doing ... state at a rate no faster than about once every 5 seconds. Now, I know labels in Dude can display [Time] showing every second consistently (also ...

vecernik87

I have TheDude on CHR to monitor all devices in company network - we are not an WISP, not even IT company. Just ordinary business with approximately ... can also see summary of current values (you can actually design these labels by yourself so it can show any textual info). It is really easy to ...

maxsaf

We have a lots of SNMP issues on The Dude V6, there are some posts about missing interfaces, ??? on labels, gaps on graphs, but Mikrotik just ignoring them. Welcome to V6 Haters Club

maxsaf

Do not migrate to Dude 6!!! After migration from Dude 4 to Dude 6 new dude starts to lose interfaces ... RouterOS API - all interfaces presents under DEVICE- SETTINGS - RouterOS- INTERFACE Link labels sometimes shows RX/TX ?? Dude1.png If i change Link - Mastering Type to RouterOS instead ...

Fires

Hi, I want make some logic in labels in the Dude but if I enter this code It is just "part evaluated" .. Variables are replaced by values but if is not evaluated .. Please help .. Or post some examples of functions in label .. Thanks

apiel1

... partially solved. I am now getting bandwidth on the Links, but it does not update unless I double click on a link and bring up the settings dialogue ... but will not unpate on its own (10Sec interval is what is set to update labels). Also will not graph throughput. Any thoughts on this one?

apiel1

I have added the variables to the link labels and below is a screenshot of the results

Thanks

Test Map with all properties open 2.JPG

erebusodora

... added links between devices. The results: 1. Information on devices labels is correct. 2. Information on devices tooltip is correct. 3. Information in SNMP tab is random - it may be from another device with same IP from the map and also can be wrong, like traffic on interfaces. ...

eriitguy

... confirmed by support. Forgive me for misleading you... As you mentioned I have added links between devices. The results: 1. Information on devices labels is correct. 2. Information on devices tooltip is correct. 3. Information in SNMP tab is random - it may be from another device with same IP from ...

Great, always confusing when users have different experiences!

turnip

That was it, thanks very much!

I meant snmp v2.
OH there maybe look at your oid, it is supposed to be "1.3.61.4.1.3808.1.1.1.4.2.3.0"
Load: [oid("3.6.1.4.1.3808.1.1.1.4.2.3.0")] %

turnip

Where can I get v2?

Probably a v3 issue, test with v2

turnip

I have two CyberPower OR600ELCDRM1U UPSs with RMCARD205 monitoring cards that I'd like to monitor with The Dude. I've configured them to use SNMPv3, and SNMPwalk is working fine from The Dude, but when i put OIDs in the label, it doesn't display anything (blank, no error). I've tried various OIDs an...

PiotrB

... 6.68 x86 router. When I first open dude client it shows correct labels however in time it doesn't refersh labels from red to green as devices ... dude client and start it again to make it show correct lables which is not a solution, it makes it basically useless . What's going on here ?

... "Sync Unknown")] or the error line of a probe it must return "" to be up so when it is in state 2 you want to return nothing. if(syncstate<>"False",if(syncstate()=2,"",if(syncstate()=3,"Hold off",if(syncstate()=4,"Retraining","failed ...

novelty22

... for cache, and negative cache out (the ,10,5) it returns the proper status relative to the SNMP value. (Sync ok for 2, Hold off for 3, etc) Not sure I'm understanding the explanation on cache and negative cache time anyways. Thank you so much for your help

... cache time is 300 seconds) that means when a read of an oid fails that failure is cached for 300 seconds. A device that has an error will not come back up until after the negative cache time expires (5 minutes) and a successful probe happens. Function Name: syncstate Code: if(string_size(oid("1.3.6.1.4.1.17713.21.1.3.1",10,5)) ...

... put an if inside an if... if(x,return this value , else if(y,return this value , else if(z,return this value , false))) In your example the if is not correct... if(oid("1.3.6.1.4.1.17713.21.1.3.1.0","2","Sync OK") There is a factor that complicates things in probes. ...

strzinek

Starting from 6.38.X link labels will no more change colour. Link itself changes colour depending on the link ... give us more details about this issue ? Also didn't found problems using email notifications on 6.38rc29 Thank you for explanation. With snmp oid array filtering I ...

... I found few annoying bugs: - color gradation of stressed links and link labels not working - status flags of network maps in left tree contents panel are missing - snmp walk ...

strzinek

... I found few annoying bugs: - color gradation of stressed links and link labels not working - status flags of network maps in left tree contents panel are missing - snmp walk ...

danayalop

Changes since v6.38rc19:

*) Removed - Link label will not change colour on link speed change.

I understand then that the labels will become ever more to change color to increase traffic? It was a very useful tool when maps are minimized.

Lakis

... [Device.NotesColumn] However, they do not show any SNMP values (snmp uptime, snmp contact, snmp location etc.) on tooltips at all devices where I have enabled SNMP. In the labels of devices, there SNMP functions operate normally (for example [snmp_uptime()] ...

jchmelik

... [Device.NotesColumn] However, they do not show any SNMP values (snmp uptime, snmp contact, snmp location etc.) on tooltips at all devices where I have enabled SNMP. In the labels of devices, there SNMP functions operate normally (for example [snmp_uptime()] ...

drspock2k

... I'm using some functions to show the Tx and Rx CCQ in mikrotik device labels, but by some reason, when devices come online the values are not shown until I get into "appearance", make any change (I.E. adding a new empty ...

... [Interface.OperStatus] to the label and be done with it. If the link labels are turned off that won't work. Having the top map labels turned off ... as the link color and up links will show up as link full color. It is not the best solution but it does work and it takes less work than a manually ...

... for fixing.</b> High priority problems: * Device discovery tool does not work with Agents. * Devices behind Agents have problems: link labels with mastering type ROS, ROS login, ROS upgrade * Some servers still experience issues ...

... for fixing.</b> High priority problems: * Device discovery tool does not work with Agents. * Devices behind Agents have problems: link labels with mastering type ROS, ROS login, ROS upgrade * Some servers still experience issues ...

... DEV for fixing. Higher priority problems: * Device discovery tool does not work with Agents. * Devices behind Agents have problems: link labels with mastering type ROS, ROS login, ROS upgrade * Some servers still experience issues ...

... to DEV for fixing. High priority problems: * Device discovery tool does not work with Agents. Low priority problems: * Adapt dude link labels to be able to show 10G traffic speed and larger (snmp part left to fix) Enhancement ...

... of a device. Total PPOE Users: 14 Note the dude will only process labels for devices and not for links or static objects. HTH Lebowski

... it to a known value and giving Yes or No. I want VALUES reported not Yes/No. Thats what ping is for. From reading forum posts, it seems the ... This will cause the device to show that oid in the label. Custom labels can be configured on individual devices and map wide but not on device ...

... for an array in a few oids. If I have to guess why your function is not working I would say the array size is not returning true therefore the ... use the first thing I suggested. Don't forget you can always use device labels for troubleshooting. [HP_CPU_a()] Should show a value and not false ...

tomaskir

Sadly, its not negative cache time, the label can stay frozen like this for days

However, ROS_Command function had infinite negative cache time, that would explain that.
I will try and experiment if I can change that somehow.

I am guessing but I believe the issue is the dude sometimes fails to process a result but then remembers for 300 seconds. You will also notice any outage is 300 seconds no mater how many times you re-probe a failed probe... Read up on negative cache time... I modified my cpu_usage function to look a...

tomaskir

Anybody, any ideas?

This is causing me massive headaches, and a manual intervention so dude works atleast 3 times daily...

tomaskir

Greeting, I have a rather big problem with labels in Dude getting "stuck". Basicly, they will not update untill the label is changed. Here is an example when a label gets stuck - - - - - - - - - ...

homerkaro

... in the dude and in the hosts. In the dude i see snmp datas but labels are not working. What can be the problem? Thanks! Daniel

It would be easier to do it directly to a device because device labels are processed differently than link labels. Links are context of the ... in the appearance of a device and it will appear where it will not on a link label. Example probe... The RSSI for a tranzeo 4132 [oid("1.3.6.1.4.1.24575.1.1.1")] ...

I don't know why or if there is a limit to labels; try this:

round((oid("1.3.6.1.2.1.43.11.1.1.9.1.6",10,5) / oid("1.3.6.1.2.1.43.11.1.1.8.1.6",10,5)) * 100)

Lebowski

I never fixed the trouble I just disabled link labels on my top map... I hover on links I am interested in and I have my links set to their daily high water mark so they turn red when they get used not when they are just utilized. Once you watch your own network for a few days you ...

mikepratt

... on both? I think I gleaned from the forum is was... With regards to the labels - why when you (I) simply select one that has decayed, and merely ... decay? Physical elements of these different networks a quite similar if not identical (wired ethernet, with some MT radio links, Dude resides MS ...

... just open the code and fix some bugs... My solution was to disable link labels on the "dashboard" map so I don't see them as often. (continued ... slow is more sensitive to false positives. Most likely the dude does not wait correctly for packets to return. I could never solve link labels ...

mikepratt

... of the proposed remedies, but still have the well-known problem - link labels do not remain updated, and slowly drift off the the rx:tx: default. Yes, this is mostly evident ...

amir

... monitoring our network. After we adding all devices we mentioned that labels data information periodically stops and the SNMP data stops too, and ... the issue in forums which was talked about changing the OID, but it was not helpful. Is there anybody who knows how to solve this problem? Thanks 8)

changeip

... keep up with how many probes its doing, so the snmp will timeout and not show labels properly. it could also be multihomed machine returning snmp packets via a different ...

I messed around with this quite a bit, I want labels to show what time the outage started as well. The only way I came up with would require a unique probe for every device.

Also this is already solved by email so it is not worth trying to make it work. It would be a good feature though.

Minollie

... and then make sure the exported data/graph is nice to look at and not messed up R3: a way to select a part of a graph and the ability to export ... maintenance per device/map or entirely R5: a way to align text in the labels not just centered and possibly messing things up, and labels themselves, ...

... will causes issues and probably wont load. Negative Cache time should not become true until the number of configured retries is reached. Currently ... IO routines. This seems to have been introduced between 3.x and 3.6. Labels are way more often seen with TX/RX instead of values. I see a lot ...

randallr

I'm seeing similar issues since moving to Beta3. Device labels and link labels will stop showing OID results. A reboot of our AMD based box will fix it. Not all devices. Seems to be only ones that have Charts also defined. History for those devices ...

There are two settings buttons current map and global. Labels refresh interval is on "map" under the either settings button. ... opposite. If the dude fails to read a value it will remember that it could not read a value for x seconds.

... other maps but this might give you some ideas... dudemap.png Edit: More notes The gigabit links are setup to show up as red when they have more than 40Mbps and I have disabled the link labels on the top map so that there is less clutter. Link labels are not modified ...

changeip

yeah was trying to figure that out - however I think the static labels dont take any dynamic data ... they just display the [ ] in the text on the map ... so im not sure i can use a function in the label...

aussiewan

Hi all, I've done a lot of googling for this problem, but have not been able to find anything helpful. We use The Dude 3.6 to monitor, amongst ... They all work in labels for all users, including an exact copy of the default link tooltip. ...

... as we discussed the dude would need to "cleanup" the list of notifications but it must not... One suggestion for you is to turn off notifications ... fyi... There was a definite change somewhere between 3.x and 4.x where labels on links would MORE OFTEN show Rx:[Interface.InBitRate] and ...

Minollie

Hi guys.., Sorry to say so, but that's not what I want.. :( Showing OID values within the labels is sort of an ease if you ask me.. The first screenshot shows the Device-settings of the switch ...

blackpaw

how are you polling this data in your interface/device labels? Just created a function "oid(1.2.3.4.5.6.7.....)" or did you ... the interface status and interface description (needed for automatic alarms/notifications to our NOC for customer connections) This is easy to do. Well, ...

gsandul

how are you polling this data in your interface/device labels? Just created a function "oid(1.2.3.4.5.6.7.....)" or did you ... 137 devices and 361 services and about 80 snmp links. But I'm currently not working at ISP :) I am monitoring about 300 devices (200 switches/routers, ...

blackpaw

... imagined monitoring call status using the Dude (Cisco must hate you for not using their fine software!) ;) how are you polling this data in your interface/device labels? Just created a function "oid(1.2.3.4.5.6.7.....)" or did you create a ...

mramos

... double upgrade to 4B3 x ROS 5.0 missed the speed/signals levels at the labels. On the other side, if I create a link between any UBNT client and ... levels (tx/rx), connection speed & etc. At the MT devices, does not matter if mastering is snmp or routeros. Just data speed shows up. * ...

znet

... Get calls from my other Dude users 'the whole network is down!'. Not to worry, it will right itself, but it takes patience for sure while you hope it will all come back. Yes, it seems that certain labels wont display properly until you kick them a little. I go to appearance ...

FIPTech

We see this problem from time to time on our platform.

We have sometimes Router OS Link labels not refreshing as well.

We are waiting for version 4 final as it seems that version 3.6 is not upgraded anymore.

FIPTech

Since a couple days, all my link labels show :

SNMP operation failed (SNMP operation failed) SNMP operation failed

I need to enable SNMP monitoring in global settings, then disable it (no-snmp).

I'm not using snmp globally, except on a few devices.

Any idea ?

... file probes will start failing and report as down. - Often labels will show Rx:[Interface.InBitRate] Tx:[Interface.OutBitRate] instead ... Reported when 3.6 was released? - False positives, devices that are not actually down have probes timeout. - Ping will usually record some value ...

... system just got silly slow at viewing graphs after a couple weeks. I am not certain why on w2k seems like everyone gets different issues. Maybe most ... was a change maybe in 3.5 where false positives and other things like labels not being updated started happening. It might be associated to a ...

In my opinion the labels that are not updated have not been collected in a timely fashion but you never have to recreate them, they will show ...

mpaluck

Hello, I update labels with snmp info and custom functions using VBS. Under 3.5 the Labels do not refresh reliably. Under the 2.2 they worked great. The system is set for a 30 second label refresh and the ...

... ixp0." but I haven't messed with it since I setup the devices. I noticed there is now one interface labeled "wireless". This seems ... into the dude mib database, oids I am interested in do not have text labels instead they just give the numbered OID. The only OID I was interested ...

mramos

... PC running XP. * The 3.6 backup file was recovered at the X86/4.0B2 but not at the 433UAH/4.0B2. I copied and paste all stuff using 2 Dude clients ... After some hours, on 433UAH/4.0B2 the 'pop up' graphs (mouse over link labels) vanish, just the scale was there. But watching the settings was possible ...

... using sum(oid_column_raw("")) in the function the probe did not graph, I had to go back to adding the separate OIDs together. The solution ... to the AP. wifi.png Here you can see a device with 0 users on it, I put labels on the devices to see the values being returned. On the top AP ...

ormwish

... and links, which all time check all SNMP parameters and send to hints, labels, etc... has stopped getting SNMP parameters, and said about "timeout" ... by physical interfaces, vlans and networks. Whithout thats features...not serious solution. HMP!

danielillu

... started monitoring links using routeros connection and it only updated data once or twice. Then I moved to SNMPv3 (MD5, SHA, security=private) and labels never got updated or label showed InInterfaceBitrate. After that I tried with SNMPv2c (no SNMP security) and it is working, but without SNMP ...

itatwork

... incorrect bandwidth readings on non-mikrotik device graphs? The link labels show the correct speed but graphs are showing 5-6x higher than they ... on bandwidth graphs for a Dlink DES-1228 switch dlinkspikes.jpg I'm not sure if this is by design but lack of detail on graph data older than ...

Yes, it is confusing, I remember that previously I was able to reproduce the same problem with type=RouterOS, but now I'm trying to get the same problem and few links are working like a charm (I've setup).

zoli

right now i am monitoring ethernet connections. i've tried with wireless and bridges as well. all three connection types produce the same problem. some devices just work like a charm. some don't work at all. router OS version can't be the problem as well. some of the 4.9 devices aren't working as we...

What kind of interface do you monitor?
Ethernet/wireless/bridge, etc. ?

zoli

hi,

yes i have checked "router OS",
the login credentials are right as well (when i enter the device, all the information is updating, if i leave it stops)

thx

Have you checked 'MikroTik RouterOS' at the device configuration (make sure correct login/password are entered to as well)?
Which interface do you monitor?

zoli

haven't tried that. i will, and will tell you if it worked.
thx a lot

Use SNMP to monitor the links?

zoli

... to monitor my network with the dude (love the name). works fine. i am a WISP and would like to monitor traffic going through the links. some link labels are just working fine, some aren't. they aren't refreshing, they refresh when i open the access point to which they are designated to. if i close ...

keith

... use wmi instead of snmp so i cant figure out how to put them in the labels This one just finds out who is logged on. 'WhoLogonInput.vbs ' Sample ... from Win32_ComputerSystem") For Each objComputer in colComputer If not objComputer.UserName = "" Then strLogonUser = Split(objComputer.UserName,"\") ...

O1DMBFan

... Now I've obviously replaced the IP's here as to not disclose public IP's of my devices. I'd like to display in all of my device labels a list of the devices IP's. Each device has different IP's so I don't want to type ...

novelty22

more often than not more often than that is the device images seem to hang when loading (random device type almost everytime....even the .svg files bundled with the Dude do it) ... until i stop/start the server process it seems to ...

winkelman

... much better. Why: A device has a problem, it turns orange or red . You notice it, ack it so the scary orange/red is no longer shown and go on to ... when they are online or offline, but they don't cause scary orange/red labels. For servers, I never want an auto-ack. Every time there's something ...

Minollie

... will turn red then, while it's still possible to have other submap labels varying from green to any other state. I think this could be a great improvement of the Dude. Another greatly appreciated addition to the ability of Submap label appearance would ...

I tried to put a tcp http probe on a label and it didn't work. Not that this works for you but I have the 5 web sites I am tracking added to a chart then I made a panel out of that chart. Note: A panel will save the legend and scale between views, a chart ...

stmx38

not working at me

concatenate("Ping: ", if(array_element(ping(device_property("FirstAddress")), 0) = -1, "<none>", array_element(ping(device_property("FirstAddress")), 0)), " ms ")

Hey gsandul, I have about 350 probes and very few items added to labels. The dude server is directly connected via gigabit to a 3750 stack that ... MIBs or something long ago although with the current settings it is are not as bad as they were. I am looking forward to the database version... Thanks,

frosty024

Alas, changing the timeout did not fix the issue. Labels displayed via SNMP still disappear at random. Is anyone else experiencing this?

... it back down to 3000ms and the gaps went away. If you are seeing labels on your links that are showing up with the rx: tx: etc instead of ... values you might want to set the timing to default for SNMP. I have not tested setting them shorter.

frosty024

Not in front of the Dude at the moment, but is there a setting to increase SNMP timeout? Do you think that will fix the disappearing labels issue? I do remember seeing a setting that controls the frequency at which the labels refresh, though that seemed to have no impact on the issue...

Stubbed

... Is this what other people are doing in this situation, or are you just not worrying? Is there some fancy way to "Average" the information from both devices that I'm not aware of, or a way to change the TX/RX labels so they could make more sense to someone who can't see the config? ...

exocrypt

Hmm not sure about your issue ill look into why they could be vanishing and let you know if I find anything. Yes it does graph it. After you have it set up you can right click on the link and go to settings then to history it ...

gazumping

... the same map the label shows on the link. It is just when I have a submap to submap link that I can't show a label. Again the data is there, but not showing on a label. Hope this helps clarify it a bit, --Christian

jmacias

I am not exactly sure what you are asking, but if you are referring to the tx/rx data you need to set the link as SNMP (like any other), then select the appropriate device you want to pull the data from.

I have not seen any way to create a variable in probe or function. I didn't notice the label that ... I have had to restart the dude service after trying to place odd things on labels. Sorry I don't know but if I had to guess I would think that he is using an external ...

Twas

... couple months and learning a little bit about oid's (very nice indeed) I have yet to find how to add RX and TX rates of wlan1 or 2 to my AP device labels in Dude. Yes, I know it's easy when using a link. But my network is getting pretty good size and I can't have link labels all over the place. ...

adamd292

... display. After altering the maps and devices to use the new images, I noticed another problem: ntp_gone_bad.jpg All of the images now work except ... and links too - they contain the label format string for submaps and labels.

They caused some trouble with some labels not applying. You should email support@mikrotik.com and ask them to repair it.

mramos

... 3.4 (at the ROS the matching .npk too). Under WinXPSP3 no fonts at the labels (if I try to set under apeareance, font field shows "unknown"); ... (+ a single dll that the 3.4 exe complains about when launched) still not showing fonts. Any idea? Regards;

hkunnana

... popup device status that the Arabic name shows correctly, but in the device label in the map, RTL (Right To Left) feature of Arabic language is not there, only the separate letters. I think it would be easy if you handle fonts natively from the windows. Note: I have added an Arabic font and ...

CGirardy

I just installed 3.2 and the same happened. I've also lost all my device labels. Disk and CPU services are all down too - on Mikrotik devices.

OK, I'm not alone...
Going back to 3.1 until someone tells me it's solved

Click on settings in the top left, click on map, open up device appearance, place the two labels below into the label field if not there...
[Device.Name]
[Device.ServicesDown]

Right click on a device, select appearance, select the image tab, verify scale is not set.

Minollie

... option.. 2: is there a way to re-enable monitoring of a device which is not monitored? I've troubles finding this option too.. (or it won't work ... problems for as far as I can see now. When I adjust Appearance of the labels of multiple devices (add something/rearrange/delete things) and hit ...

... morning. The issue where a false positive shows up and the graph is not lined up with the timeline still exists. I added notification up-unstable ... with the disk probe but I have never seen it with ciscoCPU probe. Labels on links seem to be missing counters more often now too.

... there are no devices on the dash. The links are from the core with out labels, this keeps it very clean looking. Obviously you can still hover on ... and each campus is basically a site document. We will probably add more notes and things to each campus. Maybe a "static" with a list of ...

anjey

... screen below -- it's because other than system font is used for that labels which does not support Cyrillic. My wife is Ukrainian philologist so we've double-checked the translation. ...

beerfiend

... to local server when importing a 3.07 backup after import and reconnect labels, and graphics are not there, just green squares, and links i get a debug error and completely program crash when ...

biphi

... similar weird effects related to SNMP monitoring which may or may not have anything to do with the statistics gathering. I monitor a PIX Firewall ... will not update for all the information. Somtimes it will display all labels - at other times only CPU% or stall display completely. The second ...

VTWifiGuy

The problem is the dude cant find the font it wants to use on the label so its not displaying anything. I forgot what font it was but i did fix this problem at one point in my life before i switched to windows.

cbalbont

... but it would be splendid if in the next version of The Dude that link labels would clear away once a device goes down. Or else have the link description ... to something relatively small such as "link down". What I am noticing on my network map (see attached) is that whenever a device ...

jkcinik

I too experience the same problem, not seeing device labels (from remote desktop).. I can see the labels fine when connecting remotely to the Dude Server (running ...

wildbill442

I too experience the same problem, not seeing device labels (from remote desktop).. I can see the labels fine when connecting remotely to the Dude Server (running on Win2k3) from my Windows Vista machine...

Ozelo

... queries and ICMP probes. The problem about SNMP is that some times the labels show 0 (zero) and some times just show "[interface.xsomething]" ... completely different values when you upgrade from beta 3. But this is not really a problem at all. The big problem is the picture above and ...

winkelman

... (client PC's) you do want to know if they're on or off, but you do not need to be scared by red labels when they're off. A possible solution: it would be handy if you could configure devices ...

... bug fixes v2.1: *) fixed panels *) fixed builtin functions or, and, not *) fixed some bugs in web server *) other bug fixes v2.0: *) web server ... *) expression evaluation, functions - results can be put on network map labels *) useful functions - cpu_usage, mem_usage, disk_usage *) chart data ...

Acerot

... like to organize and group the devices. Background image in a map is not very convinient for this. Moveable, resizeable, maybe parametrical graphical and textual (labels) object would be a great solution. Moreover, they could be connected to devices to ...

Minollie

... ;) So it might just be me that triggers these problems.. (hope not... ;)) I've several functions that check whether or not a returned value ... returned value by 10 should display 1 digit huh? ;)) within the device labels (inconvenient since it makes your labels HUGE ;)). But the worst thing ...

znet

... master certain 'Dude' features like generating functions to make Canopy labels display better, you will see that everything works and there is a ... to be useful, values must be abbreviated and you must resort to 'short notation'. This ends up packing whats really needed off the Canopy status ...

znet

... put it in the files folder, and I suspect overwrite the last version. Not good for history and archiving, especially when you need to reference ... PDF as a backup. While I'm thinking about this, the behavior of default labels is either unstable or having trouble. If you put a 'template' label ...

znet

... Doesnt seem to matter what the native server display resolution is. This is the symptom in WhatsUP. This can be solved in several ways, some not always working the way they did the last time... Exit the remote desktop connection and re-connect with 256 colors. Sometimes that is all that it ...

znet

... several handy SNMP based functions to display oid values in device labels. After many hours of attempts to get execute to run a simple windows ... only, or command with parameters, everthing returns '-1'. Since I am not a RouterOS scripter (which would probably help), I am at a loss as to ...

znet

... performance value, it does very well without any documentation. It is not possible to RTFM and learn anything. Nevertheless, by probing around ... to add them in my head. 8 ) Need formatiing capability in the device labels. It just center justifies everything. Some oid results produce variable ...

Atnevon

... on Windows 2003 Server, and running the client locally results in no labels being displayed (which makes it much harder than you might expect ... with a Windows XP machine, all is good and the labels appear. On a note that may or may not help to narrow this issue down for the developers, ...

Ozelo

Im trying to show SNMP values on link labels and device labels with dude v2.0b2 but no success yet. Please, correct me if Im using it wrong: http://img140.imageshack.us/img140/3905/imagem0rr.th.jpg I noticed that the button "Insert OID" in the global settings window works ...

ahooper

I suspect it will not be long before we see a similar problem emerge in XP as i have read a few articles ... this is what the problem is but may be worth the developers looking at. Having no labels is a real pain. Other than that i have foud that those fuly little lockups that ...

Ozelo

... I try to upgrade to DUDE v2.0b1, selecting "reset config" or not, the DUDE v2.0b1 does not show the map I created on DUDE v1.1 On the ... (i.e. Open separately) theres no graphics. No links, no static, no labels, nothing. Just a big blank screen. :) Yes, probably is a local behavior ...

Ozelo

As seems that the "Insert OID" button do nothing in DUDE 2.0b1, I see no way to put a RSSI level on link labels until a new release. Also, its possible to make a probe using RSSI levels. As service, this ...

At the moment it is not possible to view custom SNMP values on network maps link labels. Only values from interface table.

Search found 140 matches: labels not