Hi All
Where can I set the Antenna Gain on a CAP device under CAPsMAN system (like Wireless\Interfaces\Antenna Gain) ?
You should set it on the wireless interface before you enable cap.
Nick
“You should set it on the wireless interface before you enable cap.”
I’ve tried it. It works fine 
MegaThanx
What else parameters affect to the CAPsMAN?
only 2 values are taken from the local interface configuration: antenna-gain and antenna-mode
MegaThanx!
“only 2 values are taken from the local interface configuration: antenna-gain and antenna-mode”
How do you know it?
He is from MikroTik. If anyone knows how things work, it is of course the official MikroTik representative
this is even more trivial, from the manual:
When an AP is configured to be controlled by CAPsMAN, configuration of the managed wireless interfaces on the AP is ignored (exceptions: antenna-gain,antenna-mode). Instead, AP accepts configuration for the managed interfaces from CAPsMAN.
http://wiki.mikrotik.com/wiki/Manual:CAPsMAN#CAP_Configuration
Oh, I miss it
Can we control WMM/Power Save from CAPSMAN?
No, it’s hardcoded. normis said (about):
<= 6.30.x. wmm disabled by default via capsman
= 6.31.x wmm enabled by default via capsman