fastrack and mark routing

[smittie2000]

Good day

I have wireless link and lte link plugged into rb750gr3. Data must go out on on ether1 wifi link and voip over ether2 lte link. I achieve this using mark route.

With fastrack off it works perfectly. I understand that fasttrack bypass firewall and it`s working as intended,but how do i make it work with fasttrack on.

I added accept rule according to dst address before fasttrack rule thinking that the connection does not get fasttracked because it does not go further down firewall list once accepted.

Any advice will be helpful.

Thanks

[sindy]

This link explains what happens and what to do.

But for simple cases, you may use /ip route rule add src-address=x.x.x.x/X dst-address=y.y.y.y/Y action=lookup-only-in-table table=zzzz instead of an /ip firewall mangle rule to assign routing-mark zzzz - route rules are not bypassed by fasttrack.