Hello, i have a very simple configuration. so quick set ether1 WAN DHCP from isp , ether2-5 LAN with ip 192.168.88.1 DHCP 2-100 some devices in LAN have DHCP ip , other static ip with 192.168.88.0/24. can i setup a netmap or other function (ex dstnat o srcnat) to call my devices with another cl…

Yes, action=netmap rules in chains src-nat and dst-nat of /ip firewall nat do exactly this. Just bear in mind that if you want “transparent” traffic, i.e. that connections could be established in either direction, you must have the appropriate rule in both chains, as it is still a NAT handling, i.e.…

ok thank you fo reply. so it’s correct use this rules (both direction) /ip firewall nat add chain=dstnat dst-address=192.168.89.0/24 action=netmap to-addresses=192.168.88.0/24 /ip firewall nat add chain=srcnat dst-address=192.168.88.0/24 action=netmap to-addresses=192.168.89.0/24 or i add othe…

You may want to restrict those rules only to traffic incoming or outgoing via a particular interface or from/to a particular remote address (or address range, or address list), but yes, the baseline rules are these.

ok, thank you. i have a “normal” lan with more devices but is a single class, so for now i don’t need to setup particular interface or remote address. i will try this and then post if works. thank you again

internale lan netmap

RouterOS General

aleab June 26, 2020, 9:48am 6

work perfect
thank you

openvpn client and remote same network