What’s the recommended process for upgrading a hAP Lite from v6.35 to v6.35.2? Attempting to upgrade it via System>>Packages>>Check for Updates>>Download & Install results in the following error: ERROR: not enough disk space, 7.7MiB is required and only 7.3MiB is free I have reset this router to …

My question was, does anyone have issues using “check for updates” with a device with factory installed version? Yes, the first screenshot on my 10/6/2020 post was a default packages preinstalled on hap lite devices. No extra packages installed, had only ever done a simple NAT quickset config a…

I fully agree that on a typical SOHO device a few packages have no place to be installed as factory default. These include: mpls, routing and hotspot, they are clearly advanced stuff that vast majority of users will never need. In addition, these are quite probably not necessary for router to be ini…

As written in other threads, it was not good to make the “combined package” and thus make it impossible to remove packages and gain space. Indeed as you point out, there are packages on this class of devices that have absolutely no business being there. But they do take up space. In my opinion th…

I’ve got two devices with 16meg flash. Looking at “Files” both report around 12.6 used out of 16, but the actual files listed only amount to less than 100k. How do you see what is actually occupying flash?

I’ve got two devices with 16meg flash. Looking at “Files” both report around 12.6 used out of 16, but the actual files listed only amount to less than 100k. How do you see what is actually occupying flash? This is not about 16M flash. That is not the problem (yet). You cannot see the Router…

mongobongo: Did you ever try to reboot the device just before trying the update? That may solve it for now. The reason I mention this is that MikroTik claim in many threads that they “always test an upgrade with a device running with default settings” and they claim it works. But we as the user…

I’m in the category of “have 1000s of devices”. To be precise, close to 15.000 hAP Lites in our network. We are trying to upgrade them to 6.47.4, to no avail. No custom packages, nothing out of the ordinary. We get told the CPEs have 7.3MB left and 7.4MB are needed. We need a way to package single …

Taking the mick now… can’t make its mind up as to how much free is free… [hAP.png]

Last one and I’ll shut up until we have other views. I have tried to upgrade by downloading separate package files to a test CPE. This was fine until they would not all fit either, and had to do one set, reboot, then another set, reboot… with the added risk that a CPE could lose power at any time, b…

We get told the CPEs have 7.3MB left and 7.4MB are needed. We need a way to package single .npk files into an upgrade package with just what we need. Would we ever consider MPLS on a hAP Lite? Not in a million years… so why not give us the ability to remove it from the upgrade package? In 6.47 …

Out of disk space - upgrading hAP Lite from v6.35 to v6.35.2

RouterOS General

mongobongo October 20, 2020, 6:44am 37

Yes of course,

the “golden rule” in most things IT related, if it does not work, restart it and try again

hap lite, not enough disk space.