Spicyname say
mbim mode works only at ros7, and at ros6 you not see lte inteface - this is proof for that your ec25 is in MBIM mode.
This is setup by: /interface lte at-chat lte1 input=“AT+QCFG="usbnet",2”
If you not want be at ros7 and back to ros6, because RouterOS6 is stable then you must change ec25 mode to PPP (usb1) or ECP (lte1) if possible.
ECP is setup by: /interface lte at-chat lte1 input=“AT+QCFG="usbnet",1”
I don’t know if I need ecp or mbim or how you even set these up,
I and jspool write you that few times, we give you commnds and other thread with howto.
I can see visible under a scan, but get no internet, and don’t know how to band lock it to band 66
Now you should go to WinBox > Inteface > LTE >> APN button ans setup proper APN for connecting. Maybe set a PIN. Maybe enable roaming.
Band locking is differ case.
I’m not sure how to run the coding on the Lhg
You not must use a scripts. One line commands are not complicated. Windows have DOS - means every one can use 1 line command prompt.