Hi. I have been using Zerotier (ZT) v1.6.6 on RouterOS 7.11 for the past few days and i have a speed problem. I use the Hap ac3 as a ZT peer. I think it’s better to introduce my configuration first, and then ask for suggestions: -my ZT network is 172.24.0.0/16 and managed on zerotier central -my h…

Zerotier goes through the ZT network, if your physical location is remote, and there are no ZT root servers nearby, it can be slower. @normis And which is why bandwidth performance is vastly superior IMO based on all my tests so far especially for people who have symmetric bandwidth plans li…

If you’re looking for raw performance, ZT would be a poor VPN choose. But if you need a Layer-2 bridging, it’s one of your only choices. @Amm0 Your post was very interesting and I 4 1 very much appreciate the effort you put in to describe the ZT tribulations you’ve so far experienced. Pleas…

I dont mind giving tailscale a shot. Does it run on mikrotiks? If you’re looking for raw performance, ZT would be a poor VPN choose. But if you need a Layer-2 bridging, it’s one of your only choices. @Amm0 Your post was very interesting and I 4 1 very much appreciate the effort you p…

I dont mind giving tailscale a shot. Does it run on mikrotiks? Your Tik is your router. When you install the TailScale client on your Phone, on your NAS, on your windows PC … whatever traffic is behind your Tik goes through your Tik …. There is absolutely nothing that you have to configure on y…

I had good performance when i used ZT without it running on the router itself, that is between 2 windows machines. The poor performance was introduced when i moved the peer from the windows machine to the router, since i am out of home and it doesnt make sense to keep the pc on. So i wanted ZT on th…

Also my ds218j nas doesnt support docker and thus no ZT. Same for tailscale. aka i cant deploy it on either the router or nas. You do not need docker. TailScale has a client for your Synology NAS … check the package center near the bottom. I’ve installed it on my Synology NAS . My TailScale ne…

I am trying tailscale atm. So far it seems ok. Any idea why the speeds are inconsistend? Download speed reaches my maximum bandwidth but then drops, then goes up all the time. I even set the metric of the tailscale tunnel in windows as the lowest of all adapters, same happens on my phone. It’s defin…

Any idea why the speeds are inconsistend? Download speed reaches my maximum bandwidth but then drops, then goes up all the time. I even set the metric of the tailscale tunnel in windows as the lowest of all adapters, same happens on my phone. It’s definitely not my connection, since I tried mobile…

I turn on my mobile data with >100mbps 4G Lte, then connect to tailscale and download a file from my remote NAS behind the Mikrotik. the download speed is around 2MB/s (~16mbps), but my ISP speed is 50mbps upload. so i should be getting at least 6MB/s download with my mobile data.. at the same time,…

….. my Coax ISP upload is stable at 50mbps.. docsis 3.1 ……. Maybe my firewall rules? do i have to disable fasttrack or move it higher up? idk it bothers me so much that i cant achieve maximum bandwidth.. I checked your Tik config I do not see anything there that is hindering you. The TailSca…

Zerotier very slow speeds

RouterOS General

pitfermi January 2, 2022, 1:41pm 40

yea, as soon as i changed the 0.0.0.0/0 to 10.0.0.0/16 (lan subnet) and 10.1.0.0/24 (WG subnet) on my client’s configs, I get the full bandwidth now. see pic:

Wireguard Road Warrior config