Community discussions

MikroTik App
 
syadnom
Forum Veteran
Forum Veteran
Topic Author
Posts: 794
Joined: Thu Jan 27, 2011 7:29 am

CHR reboot under load w/ multiple CPUs...or so it appears?

Mon Mar 07, 2016 1:49 am

I was just about to deploy a CHR, but in the last minute testing it's been rebooting whenever traffic starts to flow.

XenSever6.5 on intel X5650 CPUs.

I flipped every switch, went to the most basic config I could find with no solution, until I set the VM to only have a single CPU. Can't say for sure it's the fix, but it's been stable for a half hour now. Before, <=5Minutes and it would hard reboot.

Not good!

Any Ideas?
 
syadnom
Forum Veteran
Forum Veteran
Topic Author
Posts: 794
Joined: Thu Jan 27, 2011 7:29 am

Re: CHR reboot under load w/ multiple CPUs...or so it appears?

Mon Mar 07, 2016 2:05 am

I should also not that I was running 6.34.2 and also tried 6.35rc19 with the exact same issue.

It's still running strong with 1 CPU, but now i have to do a few more days of testing and will still be nervous about production...

Who is online

Users browsing this forum: adrianmartin16, almdandi, Bing [Bot], marekm and 73 guests