Community discussions

MikroTik App
 
bhesterberg
newbie
Topic Author
Posts: 36
Joined: Wed Jul 06, 2016 8:27 pm
Location: Gifford, IL
Contact:

No Interfaces after clean install

Wed Jul 13, 2016 7:22 pm

I'm new here. I'm having some issues with RouterOS on a Hyper-V VM on a Dell 2950. Clean install, no interfaces are showing. NICs on the server are factory. I would assume they'd be supported. Am I missing something here? 

Thanks in advance.
 
Zorro
Long time Member
Long time Member
Posts: 675
Joined: Wed Apr 16, 2014 2:43 pm

Re: No Interfaces after clean install

Fri Jul 15, 2016 4:45 am

they may had intel, broadcom, nexten interfaces. not sure bout broadcom, but netxen may be not supported by ROS.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: No Interfaces after clean install

Fri Jul 15, 2016 10:59 am

for Hyper-V you have to assign interfaces to the guest manually. Guests do not see interfaces from the host system.
 
bhesterberg
newbie
Topic Author
Posts: 36
Joined: Wed Jul 06, 2016 8:27 pm
Location: Gifford, IL
Contact:

Re: No Interfaces after clean install

Fri Jul 15, 2016 5:10 pm

for Hyper-V you have to assign interfaces to the guest manually. Guests do not see interfaces from the host system.

You mean like this?
I've attached the picture of my settings.
You do not have the required permissions to view the files attached to this post.
 
Zorro
Long time Member
Long time Member
Posts: 675
Joined: Wed Apr 16, 2014 2:43 pm

Re: No Interfaces after clean install

Fri Jul 15, 2016 9:08 pm

yup. contrary to vmware, vbox, parallels and eliks - default config for - not include "stub"/default inverface in H-V.
"bare metal" broadcom NetExtreme II was supported http://wiki.mikrotik.com/wiki/Supported_Hardware for awhile by both ROS5 and ROS6.
 
bhesterberg
newbie
Topic Author
Posts: 36
Joined: Wed Jul 06, 2016 8:27 pm
Location: Gifford, IL
Contact:

Re: No Interfaces after clean install

Fri Jul 15, 2016 9:32 pm

This was already the configuration before I posted. I have a linux VM(Ubuntu) and another linux VM(CentOS) running without issues on here as well. 
So I guess I'm not sure what you are saying... Change ethernet driver?
 
Zorro
Long time Member
Long time Member
Posts: 675
Joined: Wed Apr 16, 2014 2:43 pm

Re: No Interfaces after clean install

Sun Jul 17, 2016 7:57 pm

This was already the configuration before I posted. I have a linux VM(Ubuntu) and another linux VM(CentOS) running without issues on here as well. 
So I guess I'm not sure what you are saying... Change ethernet driver?
that would hurt to try, but as stated above - NetExtreme II already supported by ROS, so perhaps not source of issues(unless they use different implementation of). try more "generic" NIC from list for start, yep
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: No Interfaces after clean install

Thu Jul 21, 2016 1:34 pm

interface you assing your virtual switch to does not matter to the CHR. It will never see the interface. It will see synthetic interface provided by the Hyper-V.

You can check this by listing '/system resources pci print'
 
bhesterberg
newbie
Topic Author
Posts: 36
Joined: Wed Jul 06, 2016 8:27 pm
Location: Gifford, IL
Contact:

Re: No Interfaces after clean install

Sat Sep 17, 2016 9:55 pm

for Hyper-V you have to assign interfaces to the guest manually. Guests do not see interfaces from the host system.
Yes I know this, as I have three other linux VM's running now. Two Ubuntu 16.04 and one Ubuntu 14.04. I have assigned a NIC to it in the Hyper-V settings. Once the NIC has been added to the VM in Hyper-V, I would think RouterOS would be able to see it, right?
Here's my interface print so you can see none listed
No interfaces listed.PNG
Here is the Hyper-V settings
Dude VM Settings.PNG
I'm puzzled as to why RouterOS isn't seeing the interface.
You do not have the required permissions to view the files attached to this post.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: No Interfaces after clean install

Mon Sep 19, 2016 11:59 am

what you see in /system resource pci print detail?

do you see BCM device there?
 
bhesterberg
newbie
Topic Author
Posts: 36
Joined: Wed Jul 06, 2016 8:27 pm
Location: Gifford, IL
Contact:

Re: No Interfaces after clean install

Mon Sep 19, 2016 8:23 pm

what you see in /system resource pci print detail?

do you see BCM device there?
No BCM device, here's a screenshot.

PCI Print.PNG
You do not have the required permissions to view the files attached to this post.
 
bhesterberg
newbie
Topic Author
Posts: 36
Joined: Wed Jul 06, 2016 8:27 pm
Location: Gifford, IL
Contact:

Re: No Interfaces after clean install

Mon Sep 19, 2016 10:14 pm

So I figured it out... In installing the OS, i downloaded the wrong file. I downloaded the regular RouterOS, not the CHR. After installing RouterOS CHR, I have an interface!
Thanks for trying to help!

Who is online

Users browsing this forum: Ahrefs [Bot], AndyGs, Bing [Bot], xristostsilis and 91 guests