Page 1 of 1
RouterOS v5 RC3
Posted: Fri Oct 29, 2010 8:30 pm
by TKITFrank
What's new in 5.0rc3 (2010-Oct-29 09:02):
*) wireless nv2 - fix stalls on encrypted 11n links using high rates;
*) wireless nv2 - fix encryption related kernel crash;
*) sstp - fixed memory leak;
*) fixed problem - bad boot/kernel crc was reported on powerpc boards
when in fact it was good;
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 8:34 pm
by fewi
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 8:37 pm
by uldis
just checked - works fine.
Try downloading using the torrent maybe.
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 8:53 pm
by csickles
X86 from Lat = ok.. From US = FAIL.
Torrent Almost NO seeeds (Yet)..
Will watch it..
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 9:00 pm
by TKITFrank
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 9:06 pm
by fewi
just checked - works fine.
Try downloading using the torrent maybe.
Works now via HTTP.
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 9:19 pm
by changeip
I just built the entire structure and am now seeding it. hopefully that helps.
Re: RouterOS v5 RC3
Posted: Fri Oct 29, 2010 10:10 pm
by csickles
Thx Sam...
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 3:10 pm
by macosoft
RC2 and RC3 blocks all traffic from my network to gateway. I have a public IP class and I dont have any routing system.
Downgraded to RC1 and works fine.
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 6:33 pm
by peson
WARNING!!!
Do not use this version in production system, at least not in x86 systems.
It breakes your firewall settings.
/Paul
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 7:06 pm
by TKITFrank
WARNING!!!
Do not use this version in production system, at least not in x86 systems.
It breakes your firewall settings.
/Paul
Can you be more specific? I have about 200 rules on my RB800 with L7 connection-mark and jump rules and so on. No problems like RC1. To my knowledge all works.
But it might be as you say only on x86. Uldis said something about content filtering not working. See below
The firewall is still acting goofy on the drop chain. This was preset on RC1 as well....
-tp
problem is with the 'content' matcher. Avoid using it and rest of the firewall will work fine. We will fix it in the next version.
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 7:25 pm
by mars
scripts dont work properly either on x86
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 7:52 pm
by NetworkPro
I just tested NetInstall. It formated and installed the setup thing on a USB drive that had older RouterOS on it. After booting this USB drive - Setup did not find any harddrives. And with v3 this works.
I also tested to upgrade RC1 to RC3 in demo mode. In log it states the package was installed. But in fact the process was quick like a flash and when it booted up the version was still RC1 and the package was not installed.
Another thing - there are still problems in /store disk, the reported size sometimes is 0, and after a restart - its ok again.
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 8:18 pm
by peson
I just tested NetInstall. It formated and installed the setup thing on a USB drive that had older RouterOS on it. After booting this USB drive - Setup did not find any harddrives. And with v3 this works.
I also tested to upgrade RC1 to RC3 in demo mode. In log it states the package was installed. But in fact the process was quick like a flash and when it booted up the version was still RC1 and the package was not installed.
Another thing - there are still problems in /store disk, the reported size sometimes is 0, and after a restart - its ok again.
You a license to change versions, upgrade/downgrade won't work in demo license
Re: RouterOS v5 RC3
Posted: Sat Oct 30, 2010 8:38 pm
by NetworkPro
Oh yeah you are right. But it did not give the proper error message.
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 1:42 am
by roadracer96
About 24hrs and I think the memory leak in SSTP may be fixed... Its dropped a little, but that may just be everything "settling in". Will know in a couple days.
Firewall is working on ppc and mipsbe so far as I can tell. Mangle, marking, filter, nat.
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 9:41 am
by peson
Correct, the content matcher still breakes the filtering.
I disabled the rules with content matcher and it works again.
WARNING!!!
Do not use this version in production system, at least not in x86 systems.
It breakes your firewall settings.
/Paul
Can you be more specific? I have about 200 rules on my RB800 with L7 connection-mark and jump rules and so on. No problems like RC1. To my knowledge all works.
But it might be as you say only on x86. Uldis said something about content filtering not working. See below
The firewall is still acting goofy on the drop chain. This was preset on RC1 as well....
-tp
problem is with the 'content' matcher. Avoid using it and rest of the firewall will work fine. We will fix it in the next version.
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 10:04 am
by acim
On my Linux server I can't execute command like this anymore:
ssh user@remote_mt '/export file=backup'
I use passwordless login. This worked on 3.x and 4.x.
In the same time, command like this is still working fine:
ssh user@remote_mt '/file print'
So, there seem to be some problem with new SSH daemon.
This is on RB800, I haven't tried other platforms.
And thank you for adding
Serbia on the countries list
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 2:36 pm
by hrvoje
scripts don´t work on x86
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 2:44 pm
by NetworkPro
What exactly script function is not working? We know that ping is not returning a value. This should be fixed in final version.
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 2:57 pm
by hrvoje
What exactly script function is not working? We know that ping is not returning a value. This should be fixed in final version.
ok, tnx
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 8:28 pm
by vacarosie200
System Health Voltage = 28V .... in a SolarTik with 12V panel
)) ...downgrade it to RC1 till this bug is fix it ... and die
(... will go to top of the hill to try to reflash it with rs232 ... hope to not rain tomorow
regards
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 9:13 pm
by NetworkPro
I doubt it that the voltage monitor is for anything else then user information.
Re: RouterOS v5 RC3
Posted: Sun Oct 31, 2010 9:50 pm
by dssmiktik
On my Linux server I can't execute command like this anymore:
ssh user@remote_mt '/export file=backup'
I use passwordless login. This worked on 3.x and 4.x.
In the same time, command like this is still working fine:
ssh user@remote_mt '/file print'
So, there seem to be some problem with new SSH daemon.
This is on RB800, I haven't tried other platforms.
And thank you for adding
Serbia on the countries list
I'm having this same problem with /export on x86 v5.0rc3
Both are hanging (sometimes they run ok, other times they hang):
/export file=test
/system backup save name=test
Re: RouterOS v5 RC3
Posted: Mon Nov 01, 2010 7:17 pm
by Freqman
Are their any plans for WDS support in WDS Slave or Bridge mode? I have my setup working in Station WDS with RB711 and an RB800 with the r52hn
Re: RouterOS v5 RC3
Posted: Tue Nov 02, 2010 10:59 am
by matvej
RB 1100 ports 1-10 not working!
Re: RouterOS v5 RC3
Posted: Tue Nov 02, 2010 11:09 am
by normis
RB 1100 ports 1-10 not working!
send supout.rif file to support
Re: RouterOS v5 RC3
Posted: Tue Nov 02, 2010 10:36 pm
by roadracer96
About 24hrs and I think the memory leak in SSTP may be fixed... Its dropped a little, but that may just be everything "settling in". Will know in a couple days.
Firewall is working on ppc and mipsbe so far as I can tell. Mangle, marking, filter, nat.
~110mb gone in just under 4 days. So leak is still there.
Re: RouterOS v5 RC3
Posted: Tue Nov 02, 2010 10:46 pm
by spruce
Good day.
After install new ROS v5.0rc3 my cpu usage snmpwalk returns not applicable values.
In WinBox CPU Load is 36-50%, but in SNMP:
..# snmpwalk -v 2c -c community host .1.3.6.1.2.1.25.3.3
HOST-RESOURCES-MIB::hrProcessorLoad.1 = INTEGER: 1
HOST-RESOURCES-MIB::hrProcessorLoad.2 = INTEGER: 0
I use this OID in requests: .1.3.6.1.2.1.25.3.3.1.2.1
It`s feature or bug? Thanks.
Re: RouterOS v5 RC3
Posted: Wed Nov 03, 2010 12:08 pm
by janisk
feature
it showed system load on core. It will be changed to show correct value of cpu load
Re: RouterOS v5 RC3
Posted: Wed Nov 03, 2010 1:54 pm
by Alfabi
sometimes frezze rb 493 we lost access from radio and Eth intefaces, after turn on/off reboot all works fine that was happen 3 times per week
http://www.bios.if.ua/pdf/mikrotik/autosupout.rif
Re: RouterOS v5 RC3
Posted: Wed Nov 03, 2010 2:03 pm
by normis
file shows some MPLS problems. email support please
Re: RouterOS v5 RC3
Posted: Wed Nov 03, 2010 9:59 pm
by Xymox
Ooooo wow cool....
On my RB750G system health shows 6184.4 V.. 6KV !.. Wow now thats a upgrade from the lowly 12 V it normally runs on...
U might wanna check that
Re: RouterOS v5 RC3
Posted: Thu Nov 04, 2010 9:43 am
by janisk
previously it showed normal voltage, on what version?
Re: RouterOS v5 RC3
Posted: Fri Nov 05, 2010 6:20 pm
by kozmai
- Dude 3.6 shows not correct value about CPU load
- upgrade from 3.30 I can't update licence key: I have to downgrade to 4.11, update licence key, then upgrade to 5 RC3
Re: RouterOS v5 RC3
Posted: Sun Nov 07, 2010 11:18 pm
by zervan
Is it possible to upgrade to this version from 4.13 on RB750/750G without lost of all the settings? Could I import settings from backup file? Could I downgrade back to 4.13 in the case of some problems?
What is the main difference between v4 and v5? Is there some webpage about that?
When do you expect to release final v5? This year?
Thanks!
Re: RouterOS v5 RC3
Posted: Mon Nov 08, 2010 3:22 am
by blake
Yes you can upgrade and downgrade without losing settings. You should probably make a backup just in case.
This presentation from MUM USA 2010 on new RouterBOARDS and ROS 5.x will highlight the major differences between 5.x and 4.x. You could view the 5.x
changelog for detailed info & bug fixes.
Normally the release dates are "when its ready."
Re: RouterOS v5 RC3
Posted: Mon Nov 08, 2010 5:26 am
by roadracer96
RB450G, if switch all ports is not selected, NO interfaces function. Upgraded about 100 routers running 5.0b4/5. 2 never came back up. Both had switch all ports unchecked. Tested it in office and confirmed.
Also, my RB1100, when I put RC3 on it, ether 1-10 didnt seem to work right if they were in a switch group. Probably related. Im guessing they have the same switch chip.
Re: RouterOS v5 RC3
Posted: Mon Nov 08, 2010 10:56 am
by janisk
- Dude 3.6 show not correct value about CPU load
SNMP cpu load value will be corrected in rc4
Re: RouterOS v5 RC3
Posted: Sun Nov 14, 2010 3:05 am
by hobbyist
RB450G, if switch all ports is not selected, NO interfaces function. Upgraded about 100 routers running 5.0b4/5. 2 never came back up. Both had switch all ports unchecked. Tested it in office and confirmed.
Just a "me too".
I have seen this on an RB450G with a default 5.0rc3 that I was connected through the serial port. When the switch-all-ports was set to no, that the default bridge that defined was gone, and that any bridge settings I did after that would be gone after a reboot. And that the router didn't work over ethernet. At some point I had a kernel panic and sent in the support file to support. The with switch-all-ports set to yes, no problems seen.