Broadcast forwarding (on demand).
NAT from/to broadcast addresses.
It seems that this rule:
/ip firewall nat add chain=dstnat in-interface=WAN dst-address=WAN_IP protocol=udp dst-port=7 action=dst-nat to-addresses=LAN_BROADCAST_IP to-ports=7
kiks in but the packet is not forwarded.
Also the "fake" ARP entry is installed:
/ip arp add address=LAN_BROADCAST_IP mac-address=FF:FF:FF:FF:FF:FF interface=LAN
Is this a bug or is a 'feature' wich is not (yet) implemented?
Also:
/ip firewall nat add chain=dstnat in-interface=WAN dst-address=[255.255.255.255 or WAN_BROADCAST_IP] protocol=udp dst-port=xx action=dst-nat to-addresses=LAN_IP_XX to-ports=xx
didn't working.
Don't ask me why I need this.
Regards, Claudiu Marusceac.