I've tested clients on windows (v2.3.3 of openvpn client) and on linux (v2.3.4 of openvpn client).
Configuration of clients:
Code: Select all
remote address port
dev tap
proto tcp-client
tls-client
ca ca.crt
auth-user-pass
pull
nobind
persist-key
resolv-retry infinite
script-security 2 system
auth-nocache
auth-user-pass auth.cfg
ping 10
remote-cert-tls server
verb 9
log-append openvpn-client.log
route-method exe
route-delay 2
redirect-gateway def1
Code: Select all
[admin@tik] > /ppp profile print where name="ovpn"
Flags: * - default
0 name="ovpn" local-address=10.10.10.1 remote-address=ovpn_pool use-mpls=default use-compression=default
use-vj-compression=default use-encryption=default only-one=default change-tcp-mss=default
address-list=""
Code: Select all
[admin@tik] > /interface ovpn-server server print
enabled: yes
port: 1194
mode: ethernet
netmask: 24
mac-address: FE:05:DF:70:59:A7
max-mtu: 1500
keepalive-timeout: disabled
default-profile: ovpn
certificate: cert_1
require-client-certificate: no
auth: sha1,md5
cipher: blowfish128,aes128,aes192,aes256
Code: Select all
[admin@tik] > /ppp active print
Flags: R - radius
# NAME SERVICE CALLER-ID ADDRESS UPTIME ENCODING
0 u2 ovpn x.x.x.x 10.10.10.10 45m36s BF-128-CBC/SHA1
1 cbtruck ovpn y.y.y.y 10.10.10.12 3m50s BF-128-CBC/SHA1