Community discussions

MikroTik App
 
simonne
just joined
Topic Author
Posts: 10
Joined: Tue Jan 25, 2011 7:38 pm

When Simple queues turns yellow...? And why I have so many droped frames

Fri Feb 27, 2015 1:58 pm

Hi

Got such configuration
0 name="5Ghz" target=172.26.0.0/24 parent=main1 packet-marks="" priority=8/8 queue=default/Down_5Ghz limit-at=0/0 max-limit=0/12M burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s total-queue=test1

1 name="DWN Download Lan" target=172.27.0.0/24 parent=main1 packet-marks="" priority=8/8 queue=Upload/Download_Lan limit-at=0/0 max-limit=2M/10M
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s total-queue=test1

2 name="24ghz" target=172.25.0.0/24 parent=main1 packet-marks="" priority=8/8 queue=Upload/Download_24 limit-at=0/0 max-limit=0/5M burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s

3 name="main1" parent=none packet-marks="" priority=8/8 queue=default-small/default-small limit-at=0/0 max-limit=0/0 burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s
Now here is the question - why in winbox I see queue turning yellow ?
And second thing - If I'll go to statistic I see that I have high level of dropped frames
First idea was to look into Total Queue Type - I had there pfifo with size 50 - I've increased that to 500 - still number of dropped frames stayed the same - and I have avg packet rate lower than 50 - what is the reason ?
 
jarda
Forum Guru
Forum Guru
Posts: 7756
Joined: Mon Oct 22, 2012 4:46 pm

When Simple queues turns yellow...? And why I have so many droped frames

Fri Feb 27, 2015 3:52 pm

My opinion : yellow borrowing capacity from parent, red dropping. Probably during some recent period.

Dropping is correct as it it the only way how the traffic can be shaped.
 
PtDragon
Frequent Visitor
Frequent Visitor
Posts: 80
Joined: Sun Apr 26, 2009 8:52 pm

Re: When Simple queues turns yellow...? And why I have so many droped frames

Fri Feb 27, 2015 5:58 pm

Now here is the question - why in winbox I see queue turning yellow ?
Green = almost free(not much bandwidth)
Yellow = around half bandwidth reached
Red = Almost fully or fully used bandwidth.
And second thing - If I'll go to statistic I see that I have high level of dropped frames
Can you give example? What you call high?
First idea was to look into Total Queue Type - I had there pfifo with size 50 - I've increased that to 500 - still number of dropped frames stayed the same - and I have avg packet rate lower than 50 - what is the reason ?
Did you reset counters? Dropped counter is not dropped/sec. It is dropped from start, so every dropped packet will increases counter and it never decreases until you reset manually it or reboot router.
Don't put big queues, they aren't good practice in most cases.

Who is online

Users browsing this forum: Amazon [Bot], beeman, Majestic-12 [Bot], noyo, pmcsill and 214 guests