hi friends i got problem with mikrotik , yesterday i configured mikrotik with web proxy and i am redirected to all the traffic to web proxy.ok well n working fine but the issue is i forwaded two ips in nat i.e (10.10.10.2 and 10.10.10.3 ) but 10.10.10.4,5,6...also access internet how its possible..how can i solve this issue
config...
ip address 10.10.10.1/26
ip>nat
chain=srcnat action=masquerade src-address=10.10.10.2
chain=srcnat action=masquerade src-address=10.10.10.3
chain=dstnat action=redirect to-ports=8080 protocol=tcp in-interface=LAN dst-port=80
Regards,
rajesh
Re: masquarade and web proxy issue
You have to allow access for 10.10.10.2 and 10.10.10.3 while blocking all others in "/ip proxy access"
Code: Select all
/ip proxy access
add action=allow comment="" disabled=no src-address=10.10.10.2
add action=allow comment="" disabled=no src-address=10.10.10.3
add action=deny comment="deny all others" disabled=no-
-
rajeshrouthu
newbie
- Posts: 46
- Joined:
Re: masquarade and web proxy issue
i have 500 users with different pools how can i add this rule in proxy access ..? tell me any easiest way to block un nat'd ip
Re: masquarade and web proxy issue
use the appropriate subnet mask to add a block of IPs.
This rule will allow all IPs in the range 10.10.10.0 - 10.10.11.255
Code: Select all
/ip proxy access
add action=allow comment="" disabled=no src-address=10.10.10.0/23
add action=deny comment="deny all others" disabled=noWho is online
Users browsing this forum: No registered users and 46 guests