Community discussions

MikroTik App
 
qwerty123
just joined
Topic Author
Posts: 3
Joined: Wed May 11, 2011 8:34 pm

User Manager and DHCP server

Wed May 11, 2011 8:50 pm

Is it possible that usermanager gives ip addreses from dhcp pool, where can i defined it.
How can I centralize ip addreses assigment process for users in userManager?


I know about this way:
/ tool user-manager router add subscriber=MikroTik ip-address=x.x.x.x shared-secret=123456,
but i have not important what address user receives.

Question is how can i assign ip address from address-pool?
Last edited by qwerty123 on Fri May 13, 2011 9:20 am, edited 1 time in total.
 
SurferTim
Forum Guru
Forum Guru
Posts: 4636
Joined: Mon Jan 07, 2008 10:31 pm
Location: Miramar Beach, Florida

Re: User Manager and DHCP server

Thu May 12, 2011 8:30 pm

You can use either "IP Address" or "Pool Name" in the "User" section of User Manager. Select the User tab, click on the user name, then enter either the ip address or the ip pool in the appropriate entry. If you use "pool name", the pool must exist in the router in "/ip pool". Click "Save" and you are good to go.

This does not change the ip on the client device. Only the hotspot "to-address" in "/ip hotspot host".
 
qwerty123
just joined
Topic Author
Posts: 3
Joined: Wed May 11, 2011 8:34 pm

Re: User Manager and DHCP server

Fri May 13, 2011 12:58 pm

There is not such item "Pool Name" under the "User > Constraints" section of User Manager.
There is only "IP Address" item and it doesn't support to point out pool name.
 
SurferTim
Forum Guru
Forum Guru
Posts: 4636
Joined: Mon Jan 07, 2008 10:31 pm
Location: Miramar Beach, Florida

Re: User Manager and DHCP server

Fri May 13, 2011 1:47 pm

What version are you using? This is a screenshot of User Manager User entry with V4.17.
You do not have the required permissions to view the files attached to this post.
 
qwerty123
just joined
Topic Author
Posts: 3
Joined: Wed May 11, 2011 8:34 pm

Re: User Manager and DHCP server

Fri May 13, 2011 5:08 pm

I used v4.11.
Thanks, SurferTim.
 
ALCOOL
just joined
Posts: 16
Joined: Wed Oct 22, 2008 12:18 am
Location: MOSCOW, RUSSIA

Re: User Manager and DHCP server

Wed Jun 06, 2012 1:31 am

I using 5.17 on rb1100
I can't find out how to configure pools
May be I should use another version of user manager?
 
ALCOOL
just joined
Posts: 16
Joined: Wed Oct 22, 2008 12:18 am
Location: MOSCOW, RUSSIA

Re: User Manager and DHCP server

Wed Jun 06, 2012 1:58 am

Not that I wanted, but I've found the way how to use pool of addresses.
Новый точечный рисунок (6).jpg
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 16 guests