Community discussions

MikroTik App
 
User avatar
kameelperdza
Member
Member
Topic Author
Posts: 468
Joined: Thu Nov 27, 2008 11:45 am
Location: Oudtshoorn, South Africa

No userdata after downgrading from 4.6 to 4.10

Mon Sep 19, 2011 8:52 pm

Hi there today i have downgraded rb750g from routeros 5.6 to routeros 4.10. when i log into router using userman i see that under users there is no data.. Does this mean that all my info is gone and that i will need to set it up again or can i retrieve it somehow.

Thanx
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: No userdata after downgrading from 4.6 to 4.10

Tue Sep 20, 2011 11:38 am

user manager in v5 is completely different than in older versions. this was to be expected. never downgrade a working configuration to some old version. why did you do that?
 
User avatar
kameelperdza
Member
Member
Topic Author
Posts: 468
Joined: Thu Nov 27, 2008 11:45 am
Location: Oudtshoorn, South Africa

Re: No userdata after downgrading from 4.6 to 4.10

Tue Sep 20, 2011 11:50 am

Hello Normis.

On one of my rb433’s I had an l2tp connection that unexpectedly reconnected every 30 minutes. This did not happen after downgrading back to 4.10. The connection has been up for 12 hours now.

I did remove the old userman backup and reconfigured it this morning.
Everything it back up and running.
Thank you.

PS: Here is my post about the l2tp problem i had.(hopyfully solved now)
http://forum.mikrotik.com/viewtopic.php?f=2&t=55055


PPS:Sorry about error in topic.It should be 5.6 and not 4.6
 
User avatar
kameelperdza
Member
Member
Topic Author
Posts: 468
Joined: Thu Nov 27, 2008 11:45 am
Location: Oudtshoorn, South Africa

Re: No userdata after downgrading from 4.6 to 4.10

Tue Sep 20, 2011 4:09 pm

The plan did not work and l2tp stil reconnects every x minutes.so i am going to go back to ros 5.6. I did tried to finetune ospf and i am using ptmp. The connection have been stable for 2 hours now. I will check every hour.
 
User avatar
kameelperdza
Member
Member
Topic Author
Posts: 468
Joined: Thu Nov 27, 2008 11:45 am
Location: Oudtshoorn, South Africa

Re: No userdata after downgrading from 4.6 to 4.10

Thu Sep 22, 2011 10:05 am

Hi there seems that the problem was that the cost of ospf interfaces was equal. I changed the cost on link B to 20 and Link A to 10.
So far so good.

Who is online

Users browsing this forum: No registered users and 32 guests