Hi

I need to setup a wireless link between to office, but need to pass-through it on a mountain. The LAN goes like this

Point A Office1
LAN 172.16.16.0 / 22
Gateway 172.16.16.1

Point B Mountain
It has to be wlan1 and wlan2???

Point c Office 2
LAN 172.16.28.0/23
Gateway 172.16.28.1

I don’t know what to use to get the connection done, they did give me 2 x rb 411 and 1 x 433 rb with 2 wlan cards. The link is about 3km from both sides to the mountain

Can anyone help me on this or give me a link on a trial what I must do

Thanks

http://www.mikrotik.com/testdocs/ros/3. ... reless.php

You are creating 2 PtP links with a bridge (repeater) in the middle.

Bridge wlan1 and wlan2 together on the RB433. It is your repeater.

Set it up and get it working in your office first. Get one PtP working, then the next. Baby steps.

Good luck,

Tom

Thanks Tom for your help,but does a brige make the ping ms longer.WHat is the best way of doing this brige or routing ?