Page 1 of 1
RB750 - how to setup for captive portal
Posted: Wed Dec 09, 2009 9:37 pm
by thecuoll
Hello,
i just have the RouterBoard RB750, i need to show a login page each time a user try to connect to the lan to go to internet.
how have i to start ?
i have connect the rb750 to my modem router, and my pc to the rb750, i dont' understand why it doesen't show my the login page! ...while if i connect my pc to the modemrouter ..and my rb750 to my modem router too... it show me the login page!? .. i don't understand!..
could any one please help me ?
thank you all
theCuolL
Re: RB750 - how to setup for captive portal
Posted: Thu Dec 10, 2009 8:15 am
by thecuoll
uhm.. any ideas ?
i just need to show a login page from a url "
http://www.mydomain.com/myloginpage.html"
where i have to setup this ?
Re: RB750 - how to setup for captive portal
Posted: Thu Dec 10, 2009 9:49 am
by normis
In your Winbox go to the Hotspot section, and click HotSpot Setup button. also watch something like this
http://tiktube.com/index.php?video=53
Re: RB750 - how to setup for captive portal
Posted: Fri Dec 11, 2009 8:04 pm
by thecuoll
thank you normis,
i tried but it doesn't work, ..i'm sure there's something i make that'wrong.
I'm confuse about the entries i got insert when i click on "hotspot setup"
my adsl-modem-router is : 192.168.1.1
my RB750 is : 192.168.88.1
i connect :
at the 1° Lan-port of my RB750 --> to the adsl-modem-router
at the 2° Lan-port of my RB750 --> ..i connect a pc where i run WinBoxLoader to setup the RB750
at the 5° Lan-port of my RB750 --> ther's a pc where i need to display the loginpage to go to internet
how could i setup my RB750 ?
now, the pc at the 5° Lan-port receive the ip from the dhcp .. and get the IP : 192.168.88.224 and it go on internet too!
but i'm not able to display the login page befor it go on internet!
Please help!
Marco.
Re: RB750 - how to setup for captive portal
Posted: Sat Dec 12, 2009 10:13 pm
by thecuoll
i did it!
i connect :
at the 1° Lan-port of my RB750 --> to the adsl-modem-router
at the 2° Lan-port (master) of my RB750 --> ther's a pc where i need to display the loginpage to go to internet.
at the 5° Lan-port of my RB750 --> .i connect a pc where i run WinBoxLoader to setup the RB750
The port to run hotspot is the master, and now it works.
i ha ve to discover what is the difference between Lan-port 2° (master ) and the other (slave)