Hi there, i was wondering if it is at all possible to connect an RB750 to my DMA Soft Radius MAN without using PPPoE? I would like to be able to just use the mac and ip of the client side device. It all seems fairly straight forward...
The RB750 NAS (Which i thought was Network Attached Storage for a loooong time) is connected, all seems good i think that i have a simple step in my RB750 setup wrong...
Radius - ppp, hotspot, wireless Address of RadiusMan Server, secret and done...(increased the timeout) Hotspot Setup - New server prof, tick use radius and change nas port type from wireless to ethernet (everything goes through lan cables except for the backhaul), tick accounting and set interim interval to 1minute, now the login im unsure about but i used HTTP PAP & CHAP, cookie on 3days
Where do i point the ip addresses on the cpe side? the routerboard so it can pass it to the radiusman or do i setup something else like...PPTP, L2TP client or is it a server?
Any links for something other than a PPPoE setup would be very gratefully recieved!
you can have a hotspot and validate this hotspot users in your radius. In the dmasoftlab website you have detailed info about how to use this radius with hotspot. If you are using v3.9 of this radius, you have this info in page 35 of the manual.
also you can validate your Wireless users with the same radius.
In your /RADIUS menu of the rb750, you have all options you can use to login using radius validation.
_________________ Martín martinruiz at ibersystems.es Experto en redes WiFi y enlaces WiFi.
Facebook: @Ibersystems Twitter: @Ibersystems
Certified in Traffic Shaping, Wireless, Internetworking, Routing and User Management. MTCTCE - MTCWE - MTCINE - MTCUME - MTCRE
Users browsing this forum: Google Feedfetcher and 15 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum