Community discussions

MikroTik App
 
joakimwg
just joined
Topic Author
Posts: 3
Joined: Fri Oct 26, 2012 2:17 pm

Disable Ethernet port/interface

Fri Oct 26, 2012 2:44 pm

Hello,

Sorry if this have been asked before but I have not been able to fins any answer to this in the forum or the reference manual.

Is is possible to via the CLI (ssh or telnet) to enable and disable individual Ethernet ports?

Thanks,
J
 
Pilgrim
Member Candidate
Member Candidate
Posts: 265
Joined: Sun Mar 30, 2008 1:04 pm

Re: Disable Ethernet port/interface

Fri Oct 26, 2012 2:58 pm

Just open in winbox and click on interfaces. Here you can enable, disable, renam, etc. each interface individually.

rgs Pilgrim
 
joakimwg
just joined
Topic Author
Posts: 3
Joined: Fri Oct 26, 2012 2:17 pm

Re: Disable Ethernet port/interface

Fri Oct 26, 2012 4:14 pm

Just open in winbox and click on interfaces. Here you can enable, disable, renam, etc. each interface individually.

rgs Pilgrim
Ok thanks. But can it be done via CLI (ssh or telnet preferably).
 
joakimwg
just joined
Topic Author
Posts: 3
Joined: Fri Oct 26, 2012 2:17 pm

Re: Disable Ethernet port/interface

Fri Oct 26, 2012 5:02 pm

Ok thanks.

But is it possible to do this via the CLI (ssh or telnet preferably).
 
l1th1um
just joined
Posts: 1
Joined: Thu Nov 11, 2010 9:36 pm

Re: Disable Ethernet port/interface

Fri Oct 26, 2012 6:53 pm

interface ethernet disable ether1
interface ethernet enable ether1

Who is online

Users browsing this forum: esj, rarlup, Rox169 and 50 guests