I want to connect to 10.1.1.15 via ssh or web. Looks like in routing table it unable to find correct path to my source network.
But how to correct it to allow everyone connect to host via vlan interface ip?

Excerpt from configuration:
/ip address add address=10.1.1.15/24 interface=VLAN1100 network=10.1.1.0

/ip route add distance=5 gateway=10.1.1.1 routing-mark=MGMT
/ip route vrf add interfaces=VLAN1100 route-distinguisher=0:0 routing-mark=MGMT

Web, winbox, ssh etc access to the router works only in main routing table.

Thanks

Web, winbox, ssh etc access to the router works only in main routing table.

It isn't totally correct. Because if you've got access to the Internet from main route table, mikrotik gets inbound request on VRF interface and sends reply via Internet interface in main route table. Is it possible to change this behaviour?

Hello?

Web, winbox, ssh etc access to the router works only in main routing table.

It isn't totally correct. Because if you've got access to the Internet from main route table, mikrotik gets inbound request on VRF interface and sends reply via Internet interface in main route table. Is it possible to change this behaviour?

+1