I have 2 routers connected by a simple switch.
10.26.1.1 is backbone router. R1
10.26.1.3 is a wireless AP and PPPoE Server
R1 configuration v4.5
Code: Select all
/ip address
add address=10.4.1.1/24 broadcast=10.4.1.255 comment="" disabled=no interface=HalkenSector2 network=10.4.1.0
add address=10.26.1.1/24 broadcast=10.26.1.255 comment="" disabled=no interface=HalkenSector1 network=10.26.1.0
network=95.0.133.252
Code: Select all
/routing ospf instance
set default comment="" disabled=no distribute-default=always-as-type-2 in-filter=ospf-in metric-bgp=20 metric-connected=20 metric-default=1 metric-other-ospf=auto \
metric-rip=20 metric-static=20 name=default out-filter=ospf-out redistribute-bgp=no redistribute-connected=as-type-2 redistribute-other-ospf=as-type-2 \
redistribute-rip=no redistribute-static=as-type-2 router-id=0.0.0.0
/routing ospf area
set backbone area-id=0.0.0.0 comment="" disabled=no instance=default name=backbone type=default
/routing ospf area range
add advertise=yes area=backbone comment="" cost=calculated disabled=yes range=0.0.0.0/0
/routing ospf network
add area=backbone comment="" disabled=no network=10.26.1.0/24
add area=backbone comment="" disabled=no network=10.4.1.0/24
Code: Select all
/ip address
add address=10.26.1.3/24 broadcast=10.26.1.255 comment="" disabled=no \
interface=vlan1 network=10.26.1.0
Code: Select all
/routing ospf instance
set default comment="" disabled=no distribute-default=always-as-type-2 \
in-filter=ospf-in metric-bgp=20 metric-connected=20 metric-default=1 \
metric-other-ospf=auto metric-rip=20 metric-static=20 name=default \
out-filter=ospf-out redistribute-bgp=no redistribute-connected=as-type-2 \
redistribute-other-ospf=as-type-2 redistribute-rip=no \
redistribute-static=as-type-2 router-id=0.0.0.0
/routing ospf area
set backbone area-id=0.0.0.0 disabled=no instance=default name=backbone type=\
default
/routing ospf interface
add authentication=none authentication-key="" authentication-key-id=1 cost=10 \
dead-interval=40s disabled=yes hello-interval=10s instance-id=0 \
interface=all network-type=ptmp passive=no priority=1 \
retransmit-interval=5s transmit-delay=1s
add authentication=none authentication-key="" authentication-key-id=1 cost=10 \
dead-interval=40s disabled=yes hello-interval=10s instance-id=0 \
interface=wlan1 network-type=ptmp passive=no priority=1 \
retransmit-interval=5s transmit-delay=1s
/routing ospf network
add area=backbone disabled=no network=10.26.1.0/24
add area=backbone disabled=yes network=0.0.0.0/0
add area=backbone disabled=yes network=95.0.133.0/24
I tried every possible scenario to solve this problem.
Any ideas ?