i'm using mikrotik RB1000 V 3.23 and have a problem with NAT:
i made an address list 192.168.200.0/28, 192.168.200.16/28 etc... and made a NAT with action src-net to addrress 10.0.0.1 10.0.0.2 etc... every 16 ip's NAT to one IP.
Code: Select all
chain=srcnat action=src-nat to-addresses=10.0.0.1 src-address-list=1javna16privatne_01
out-interface=ether1
54 chain=srcnat action=src-nat to-addresses=10.0.0.2 src-address-list=1javna16privatne_02
out-interface=ether1
i have a situation that ip's still reserved for some reason, which meens that i have 300 used IP's in the NAT but in NAT table it shows that about 1500 IP's are in use. (i have only 300).
i allways have to add new IP's so the all users can work.
is there any solution? or any help please?