Hello,

How would I go about configuring multicast routing between different interfaces on a single router? I have tried PIM without success as it seems to require at least two routers to function.

Current setup:

Multicast source --> eth2 --> eth3 --> multicast client

(192.168.1.10 --> 192.168.1.1 --> 192.168.2.1 --> 192.168.2.10)

Multicast group 239.255.100.1

There are more than 2 subnets to be able to route to, and there may be more routers added in the future - then I can use PIM.

I hope this is clear enough to explain what I would like to achieve.

Tony

what RP, u configured on Router ??

what RP, u configured on Router ??

RP is configured to the IP of the multicast source (e.g. 192.168.1.10) with 224.0.0.0/4 as alternate-subnets. All other settings left as default.

can u show the pim interface SNAP