I am running a 750G with 5.14 RoS.
My main question is why and what is up with blue colored text in Winbox against some of my entries. ???
Below is my ospf code and screen shots.
I am able to ping routers down the ospf path from the mikrotik terminal interface with no problem.
I also note that the instace and area's code seems to have default entries that I cannot delete(can modify, so i did ! ) not sure about that.
Can someone give some pointers that I have missed ??
Cheers.
Code: Select all
[admin@MikroTik] /routing ospf> export
# mar/27/2012 23:40:31 by RouterOS 5.14
# software id = UULX-501R
#
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never in-filter=ospf-in \
metric-bgp=auto metric-connected=20 metric-default=110 metric-other-ospf=\
auto metric-rip=20 metric-static=20 name=default out-filter=ospf-out \
redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=\
as-type-1 redistribute-rip=no redistribute-static=no router-id=10.10.66.81
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default name=\
backbone type=default
/routing ospf interface
add authentication=none authentication-key="" authentication-key-id=1 cost=10 \
dead-interval=5m disabled=no hello-interval=10s instance-id=0 interface=\
"Port_2_To JEE" network-type=broadcast passive=no priority=1 \
retransmit-interval=5s transmit-delay=1s use-bfd=no
/routing ospf network
add area=backbone disabled=no network=10.10.65.0/28
[admin@MikroTik] /routing ospf>